April Sale

All items below are on special through to 30th April or until stocks last!

Results 1 - 96 of 120 Show: Sort By:
  • On Sale

    1000/6000Grit Combination Bench Waterstone WS-16000

    A cost-effective method of buying two stones-in-one. Supplied as a reversible 1000/6000grit combination, this stone will suit most woodworkers as the 1000grit side can be used for preparing and dressing the tool, whilst the 6000grit stone can be used to finish the sharpening process.

    It is recommended to keep the 1000grit side suspended in a water bath when not in use.

     

    » View More

    April Sale! $71.90 (inc GST)
    RRP: $84.90
     
  • On Sale

    100mm Scroll Chuck

    From $169.00 April Sale! (inc GST)
    RRP: $189.00
     
  • On Sale

    100mm Scroll Chuck Cole Jaws TSCFJ-100

    April Sale! $46.50 (inc GST)
    RRP: $54.90
     
  • On Sale

    100mm Scroll Chuck Large Jaws TSCLJ-100

    April Sale! $37.90 (inc GST)
    RRP: $44.90
     
  • On Sale

    100mm Scroll Chuck Pin Jaws TSCPJ-100

    April Sale! $33.90 (inc GST)
    RRP: $39.90
     
  • On Sale

    100mm Scroll Chuck SuperGrip Jaws

    From $37.90 April Sale! (inc GST)
    RRP: $44.90
     
  • On Sale

    15 Piece Metric Forstner Bit Set FSB-15

    April Sale! $89.00 (inc GST)
    RRP: $109.00
     
  • On Sale

    16 Piece Imperial Forstner Bit Set FSB-16

    April Sale! $99.00 (inc GST)
    RRP: $119.00
     
  • On Sale

    160mm Precision Protractor IRP-100

    Incra have reinvented the protractor by putting extra long guide slots at every 45°, 30°, 22.5°, 5°, 1° and 0.5° interval to plot any angle with ease and absolute accuracy. If you take a few seconds to remove the T-bar you will also have an excellent 160mm rule with micro-fine marking holes at every 1mm.

    » View More

    April Sale! $44.90 (inc GST)
    RRP: $49.90
     
  • On Sale

    16mm Spur Centres

    From $12.50 April Sale! (inc GST)
    RRP: $14.90
     
  • On Sale

    203 x 70mm Double Sided Diamond Plate

    From $149.00 (inc GST)
     
  • On Sale

    24 Piece Metric Forstner Bit Set FSBQ-24

    April Sale! $235.00 (inc GST)
    RRP: $279.00
     
  • On Sale

    25mm Spur Centre TSC-0225

    April Sale! $14.90 (inc GST)
    RRP: $17.90
     
  • On Sale

    3rd Hand

    The Original Third Hand is the Employee Of The Month as it’s never late, won’t talk back and does what you ask it to do every time.

    It has the following easy-to-use features –
    - Telescopes from 1.525m – 3.66m.
    - Ball detents positively lock the telescopic poles in place across a range of stops.
    - Hold on to the neoprene handle while using precision pump jack to adjust the height.
    - Turn Third Hand pole for micro-adjustments built into the base.
    - Maximum load capacity of 68kg per Third Hand (150lb).

    What can you do with the Third Hand? The answer is just about anything. Some of its most common uses include (but aren’t limited to) –
    - Hanging wall cabinets
    - Holding crown mouldings
    - Supporting roofing panels
    - Helping gutter installation
    - Mounting lasers, lighting etc.
    - Stabilizing loads in the back of trays
    - Creating dust barriers

    » View More

    From $69.00 April Sale! (inc GST)
    RRP: $79.00
     
  • On Sale

    3rd Hand Dust Barriers

    One of the most exciting applications of the Third Hand family is the ability to create instant dust barriers. To call these barriers makeshift is wrong because you can create fully-sealed enclosures with the Third Hand Dust Barriers that are quick and easy to setup, easy to use and will keep your customers, wife or husband happy from making a mess in the rest of the house.

    The magnetic dust barrier door measures 1090 x 2160mm so it will suit most standard and oversized single width doors. Simply walk through the door and let the magnets snap the door shut behind you to keep the dust from spreading outside your workspace.

    If you already have a pair of 3rd Hands then you will just need the Mag Dust Barrier Door Kit which includes - 

    - One top rail
    - One mag dust door
    - One carrying bag
    - Ten magnetic strips

    If you are starting from scratch the Mag Dust Barrier Door System includes everything you need to get started including - 

    - Two Third Hands
    - One top rail
    - One mag dust door
    - Two carrying bags (for Third Hand and Mag Dust Barrier Door)
    - Ten magnetic strips
    - Two dust barrier feet

    Also available separately are Light Duty 3rd Hands. These are used to create a sealed dust barrier by holding plastic sheeting in place (not included) with the included mag dust barrier feet around a part of the room. 

    They are produced from sturdy aluminium and all you do is push them to the ceiling, twist and lock in place. They also have micro-adjustable feet for fine adjustment. At only 680g each, they weigh next to nothing and are perfect for holding plastic sheeting to create dust barriers. Suitable for only up to 9kg (20lb) capacity.

    » View More

    From $135.00 April Sale! (inc GST)
    RRP: $149.00
     
  • On Sale

    3rd Hand Hook & Hang FC-09982

    Hook & Hang - A sturdy steel accessory that attaches quickly and easily to any Third Hand main pole to hang lights or any other accessories on it. Use one on two different Third Hands as a door rotisserie!

    Magnetic Lasermount Kit - Our Magnetic LaserMount utilizes powerful neodymium magnets to securely attach your laser to the Third Hand. The laserline becomes the actual line you work from, eliminating the need for chalk lines. Position any laser exactly where you want it.

    Replacement Feet - If you damage, or want to carve up a foot for a specific job, or just got the wrong kit and need more of the right feet, they are available separately. 

    » View More

    April Sale! $8.50 (inc GST)
    RRP: $9.90
     
  • On Sale

    3rd Hand Little Hand

    The Little Hand is produced in the same way as the Third and Upper Hand but because of its height range, does not have telescopic poles. It is the same in every other way and that’s why its still rated to 68kg (150lb) per Hand. It is great for supporting upper cabinets when the bottom cabinets are installed as well as general lifting and spreading in its size range.

    Available in two sizes -

    The original Little Hand which covers a 420 – 580mm and is available in a single and twin pack. The twin pack comes with a handy heavy-duty carry bag.

    Now also available is the more popular XL System which covers a 597 - 965mm range. The XL System is only available as a pair with a heavy-duty nylon carry bag included.

    » View More

    From $115.00 April Sale! (inc GST)
    RRP: $135.00
     
  • On Sale

    3rd Hand Magnetic Lasermount Kit FC-80085

    April Sale! $42.50 (inc GST)
    RRP: $49.90
     
  • On Sale

    3rd Hand Upper Hand Accessories

    Other accessories available to extend the use of the Upper Hand is the tripod stand (which can be used on all Third Hand products to improve stability), the roller stand top and the seat cushion to have a quick seat on the job when necessary. 

    » View More

    From $125.00 April Sale! (inc GST)
    RRP: $149.00
     
  • On Sale

    3rd Hand Upper Hand Two Piece System FC-80595

    The Upper Hand is the same to the Third Hand in every way except for one slight difference – it is designed to be used in the 715 – 1525mm range. It still uses the same construction so is also rated to 68kg (150lb) per Hand and it will still do what you tell it to do.

    The Upper Hand is useful when installing upper cabinets when the base cabinets are not in yet as well as a range of other applications such as -

    - Being used as a spreader
    - Working with the Hook & Hang to use as a door rotisserie
    - Mounting lasers
    - Stabilizing loads in the back of trays
    - Being used with Upper Hand accessories for a range of worksite uses

    It has the same great, high quality and dependable features as the Original 3rd Hand including - 

    - Ball detents positively lock the telescopic poles in place across a range of stops.
    - Hold on to the neoprene handle while using precision pump jack to adjust the height.
    - Turn Upper Hand pole for micro-adjustments built into the base.

    » View More

    April Sale! $139.00 (inc GST)
    RRP: $159.00
     
  • On Sale

    3rd Hand Workholding Adapters

    From $12.50 April Sale! (inc GST)
    RRP: $14.90
     
  • On Sale

    450 x 300mm Woodlathe

    From $339.00 April Sale! (inc GST)
    RRP: $379.00
     
  • On Sale

    550 x 320mm Woodlathe

    From $849.00 April Sale! (inc GST)
    RRP: $949.00
     
  • On Sale

    85mm Steel Face Plate FP-85-SC

    April Sale! $23.90 (inc GST)
    RRP: $27.90
     
  • On Sale

    AccuScribe Mini FC-02060

    April Sale! $14.50 (inc GST)
    RRP: $16.90
     
  • On Sale

    Alloy Honing Guide MJ-817

    A simple universal design that has been around for years and still “does the job”. This one is manufactured in Taiwan so has clean, accurate castings and is well assembled. Will clamps any blades 3.2 – 76.1mm wide and runs on a a simple alloy wheel on the stone. Great value-for-money.

    » View More

    April Sale! $11.90 (inc GST)
    RRP: $14.90
    Out of Stock
     
  • On Sale Featured Product

    Auto-PRO Workbench/Drill Press Hold-Downs

    From $35.90 April Sale! (inc GST)
    RRP: $44.90
     
  • On Sale

    Bench Standard Drill Press DPB-600

    April Sale! $419.00 (inc GST)
    RRP: $469.00
     
  • On Sale

    Bench Waterstone - Superfine WS-8000

    For the ultimate edge on your tools you can’t go past this stone. A very generous size for all chisels and plane blades (210 x 73 x 22mm), this stone comes on its own stand. The abrasive used in the manufacture of this stone is of the highest purity, ensuring that you receive a top-quality man-made stone.

    Once you have sharpened on this stone you can virtually skip lapping the edge of your tool and get straight into use.

    Comes with its own cleaning stone.

    » View More

    April Sale! $119.00 (inc GST)
    RRP: $139.90
     
  • On Sale

    Bench Waterstones - Coarse

    King is the major producer of manufactured ceramic waterstones in Japan and for good reason – they produce the best low-cost manufactured stones in the country and generally regarded as the industry-standard waterstone, not only in Japan but also Australia.

    The 800grit stone is for repairing major nicks in your woodworking blades and chisels or for your general household sharpening. The 1200grit stones are perfect for giving your tools a quick touch-up if you sharpen regularly before moving on to your finer grit stones.

    These stones should be stored in water when not being used.

    » View More

    From $33.90 April Sale! (inc GST)
    RRP: $39.90
     
  • On Sale

    Bench Waterstones - Fine

    Used for the final sharpening process – simply sprinkle a few drops of water on for lubrication and put that razor-sharp edge on your tools. The 4000 grit stone is good value-for-money whilst 6000 grit will provide a very fine edge for a few more bucks.

    Both stones measure 185 x 65 x 19mm and come mounted on a plastic base for ease of use on a bench.

    » View More

    From $37.90 April Sale! (inc GST)
    RRP: $44.90
     
  • On Sale

    Bowtie Clamp FC-02161

    April Sale! $15.50 (inc GST)
    RRP: $17.90
     
  • On Sale

    Cabinet Bevel Edge Chisels

    From $16.90 April Sale! (inc GST)
    RRP: $19.90
     
  • On Sale

    Cabinet Butt Chisels

    From $19.90 April Sale! (inc GST)
    RRP: $22.90
     
  • On Sale

    Cabinet Chisel Set of 4 N-863010

    April Sale! $63.50 (inc GST)
    RRP: $74.90
     
  • On Sale

    Cabinet Chisel Set of 6 Blocked N-877601

    April Sale! $109.00 (inc GST)
    RRP: $129.00
     
  • On Sale

    Cabinet Chisel Set of 6 Cased N-853055

    April Sale! $109.00 (inc GST)
    RRP: $129.00
     
  • On Sale

    Cabinet Corner Cleaning Chisel N-813410

    April Sale! $46.50 (inc GST)
    RRP: $54.90
     
  • On Sale

    Cabinet Cranked Paring Chisels

    From $31.90 April Sale! (inc GST)
    RRP: $37.90
     
  • On Sale

    Cabinet Firmer Chisels

    From $24.90 April Sale! (inc GST)
    RRP: $29.90
     
  • On Sale

    Cabinet Mortice Chisels

    From $24.90 April Sale! (inc GST)
    RRP: $29.90
     
  • On Sale

    Cabinet Paring Chisels

    From $42.50 April Sale! (inc GST)
    RRP: $49.90
     
  • On Sale

    Cabinet Skew Paring Chisels

    From $66.90 April Sale! (inc GST)
    RRP: $79.00
     
  • On Sale

    Cable Conduit Dually Grommet

    From $4.50 April Sale! (inc GST)
    RRP: $6.00
     
  • CRB7 Combination Router Base

    From $189.00 (inc GST)
     
  • On Sale

    Cross Slide Vice CSV-4

    April Sale! $79.00 (inc GST)
    RRP: $99.00
     
  • On Sale

    Crown Revolving Live Centre TLRC-0219

    April Sale! $42.50 (inc GST)
    RRP: $49.90
     
  • On Sale

    Crown Spur Drive Centres

    From $29.90 April Sale! (inc GST)
    RRP: $34.90
     
  • On Sale

    Deluxe Honing Guide MJ-847

    This guide will clamp blades and chisels anywhere from 0 – 63mm by sandwiching the blade between the base and clamp. The brass nuts and nylon washers make it easy to have good clamping pressure without over-tightening and damaging your tool or the guide.

    The 40mm-wide brass roller provides stability when rolling on the stone. This can be removed to expose a ledge that can then be run against your bench grinder tool rest to use as a straight grinding jig. 

    » View More

    April Sale! $19.90 (inc GST)
    RRP: $24.90
     
  • On Sale

    Double Flush Cut Saw RS-1151

    April Sale! $29.90 (inc GST)
    RRP: $34.90
     
  • On Sale

    Drill Press Easy Riser Kit ERK-100

    April Sale! $74.90 (inc GST)
    RRP: $84.90
     
  • On Sale

    Drill Press Table T-Track Hardware Kit DPTTK-1

    April Sale! $135.00 (inc GST)
    RRP: $149.00
     
  • On Sale

    Drill Press/Workbench Hold-Downs

    From $31.50 April Sale! (inc GST)
    RRP: $34.90
     
  • On Sale

    Easy Chip Deflectors

    From ~New to Australia~ $39.90 (inc GST)
    RRP: $44.90
     
  • On Sale

    Easy Detailers

    From ~New to Australia~ $121.50 (inc GST)
    RRP: $135.00
     
  • On Sale

    Easy Finishers

    From ~New to Australia~ $121.50 (inc GST)
    RRP: $135.00
     
  • On Sale

    Easy Hollowing Tools

    From ~New to Australia~ $189.00 (inc GST)
    RRP: $209.00
     
  • On Sale

    Easy Live Centre System

    From ~New to Australia~ $169.00 (inc GST)
    RRP: $189.00
     
  • On Sale

    Easy Micro Tool Set EWT-12021

    ~New to Australia~ $359.00 (inc GST)
    RRP: $399.00
     
  • On Sale

    Easy Parting Tool EWTPT-125

    ~New to Australia~ $169.00 (inc GST)
    RRP: $189.00
     
  • On Sale

    Easy Roughers

    From ~New to Australia~ $121.50 (inc GST)
    RRP: $135.00
     
  • On Sale

    Easy Start Tools

    From ~New to Australia~ $89.00 (inc GST)
    RRP: $99.00
     
  • On Sale

    Easy Tool Level EWT-8202

    ~New to Australia~ $5.90 (inc GST)
    RRP: $6.50
    Out of Stock
     
  • On Sale

    Easy Tools Carbide Cutters

    From ~New to Australia~ $26.90 (inc GST)
    RRP: $29.90
     
  • Fasttrack Sharpening System

    From $135.00 (inc GST)
     
  • On Sale

    Floor Heavy Duty Drill Press DPF-1100

    April Sale! $629.00 (inc GST)
    RRP: $699.00
     
  • On Sale

    Floor Radial Drill Press RDF-600

    April Sale! $449.00 (inc GST)
    RRP: $499.00
     
  • On Sale

    Floor Standard Drill Press DPF-600

    April Sale! $449.00 (inc GST)
    RRP: $499.00
    Out of Stock
     
  • On Sale

    Flush Cut Trimmers - End Nippers FC-80563

    April Sale! $21.90 (inc GST)
    RRP: $25.90
     
  • On Sale

    Flush Cut Trimmers - Fret Nipper FC-05067

    April Sale! $22.90 (inc GST)
    RRP: $26.90
     
  • On Sale

    Flush Cut Trimmers - Heavy Duty FC-80550

    April Sale! $29.90 (inc GST)
    RRP: $34.90
     
  • On Sale

    Flush Cut Trimmers - Macro (Standard) FC-80487

    April Sale! $22.90 (inc GST)
    RRP: $26.90
     
  • On Sale

    Flush Cut Trimmers - Micro FC-80551

    April Sale! $14.90 (inc GST)
    RRP: $17.90
     
  • On Sale

    Forstner & Sawtooth Bits - Imperial

    From $6.50 April Sale! (inc GST)
    RRP: $7.90
     
  • On Sale

    Forstner & Sawtooth Bits - Metric

    From $5.20 April Sale! (inc GST)
    RRP: $6.50
     
  • On Sale

    Forstner Bit Extension EXTN-1

    April Sale! $19.90 (inc GST)
    RRP: $22.90
     
  • On Sale

    Full Woodturners Jacket

    From $42.50 April Sale! (inc GST)
    RRP: $49.90
     
  • On Sale

    GluBot Glue Dispenser System

    From $10.90 April Sale! (inc GST)
    RRP: $12.90
     
  • On Sale

    I-Box Jointing Jig IBOX

    The new Incra I-Box is the most advanced tool ever produced for creating a stunning variety of box & finger joints. Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs. At the same time, it's easy to use and the included 1-hour instructional DVD covers everything from basic setup to advanced decorative joinery.

    This versatile design works on both table saws and router tables, and it's available to fit standard 19.0 x 9.5mm standard mitre slots. The I-Box is an evolutionary leap forward from conventional box joint methods and the I-Box's dual pitch lead screw mechanics easily micro-adjust joint tightness & provide a massive 3.2 - 19.0mm range of pin widths. It's capable of making good fitting box joints using any width cutter within that range into timber from 6.4 - 25.4mm thick.

    The advantages continue far beyond the basics: I-Box-exclusive joints like the Center Keyed Box Joint can be used to produce symmetric patterns on any width timber, allowing you the flexibility to create joinery that matches existing project plans rather than altering board widths to fit the limited possibilities of traditional box joint jigs.

    The Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects, and the I-Box can even be used to produce an unlimited variety of classic dentil mouldings!

    Nothing says "craftsmanship" like adding solid wood hinges to your projects, and the I-Box can be used in conjunction with the INCRA HingeCrafter to produce wooden hinges in four different barrel diameters and in lengths up to 250mm. 

    If you've been looking to improve your shop's joinery capabilities with a fast, versatile, and easy to use method for producing box joints of all descriptions, the INCRA I-Box is what you've been waiting for.

    » View More

    April Sale! $269.00 (inc GST)
    RRP: $299.00
     
  • On Sale

    Incra Precision Bend Rules

    Incra Bend Rules make dual-surface layouts a snap using the corner slots. It also provides zero-parallax measuring on any flat surface. Micro-fine marking holes at every ¼mm instantly locate your sharp pencil point exactly on target with zero uncertainty and no eye-strain! The? 90° shape holds it snugly in place and there are even two vertical end scales for drawing precision parallel lines relative to the edge of your work.

    » View More

    From $26.90 April Sale! (inc GST)
    RRP: $29.90
     
  • On Sale

    Incra Precision Centring Rule IRC-300

    Find the exact centre of any work piece up to 300mm wide. In addition to top and bottom micro-fine marking holes at every 1mm it also has a built-in protractor with guide slots at every 45°, 30°, 22.5°, and 5° interval.

    » View More

    April Sale! $28.90 (inc GST)
    RRP: $31.90
     
  • On Sale

    Incra Precision Measuring Rule

    Incra scores again with its precision steel rule. Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. These Marking Rules are precisely what's needed for accuracy by offering marking holes at every ¼mm! This is unmatched in the industry of marking rules.

    » View More

    From $15.90 April Sale! (inc GST)
    RRP: $17.90
     
  • On Sale

    Incra Precision T-Rules

    With the addition of a fence you can now quickly and accurately mark anything from a work piece edge, as well as use the T-rule as an accurate layout square. Slide the fence along the work piece with 0.5mm mechanical pencil or scribe in place to use as a marking/mortice gauge too. The end has height marking slots 50mm high to expand its usefulness even more. 

    » View More

    From $31.50 April Sale! (inc GST)
    RRP: $34.90
     
  • On Sale

    Jack Of All Trades FC-98021

    April Sale! $59.90 (inc GST)
    RRP: $69.90
     
  • On Sale

    Japanese Height Gauge S-62081

    April Sale! $33.90 (inc GST)
    RRP: $39.90
     
  • On Sale

    Japanese Saw Fine Cabinet Kit RSKIT-2

    Bundle & Save! $135.00 (inc GST)
    RRP: $149.00
     
  • On Sale

    Japanese Saw General Purpose Kit RSKIT-1

    Bundle & Save! $119.00 (inc GST)
    RRP: $135.00
     
  • On Sale

    Japanese Saws - Dozuki

    A Dozuki saw is a saw that has a spine to keep the cutting action accurate. Dozuki saws are the most popular type of Japanese saw on the market. D = depth of cut.

    » View More

    From $59.90 April Sale! (inc GST)
    RRP: $69.90
     
  • On Sale

    Japanese Saws - Fugaku

    From $63.50 April Sale! (inc GST)
    RRP: $74.90
     
  • On Sale

    Japanese Saws - Kataba

    Kabata saws are popular for general cabinet work. It features a flexible blade, which means it can cut through any thickness of timber as well as doing flush cut work. (please note: May mark timber when flush cutting) The blade is slightly tapered to the top so that friction is reduced when plunge cutting. The size provided is an average at the middle of the blade. The tooth configuration remains constant over the length of the blade to ensure a uniform, fine finish. The RS-412 is the same as th

    » View More

    From $37.90 April Sale! (inc GST)
    RRP: $44.90
     
  • On Sale

    Japanese Saws - Miniature

    These saws have all the same features as their large brothers. They are made for users who need a small tool to get into a tight space, or who only work with small work pieces and therefore can exert greater control through the use of a smaller saw. All saws feature the improved EVA GRIP, which makes it more comfortable to use over longer periods of time and easier to control. The RS-293 and RS-290 have the ability to plunge cut into timber.

    » View More

    From $33.90 April Sale! (inc GST)
    RRP: $39.90
     
  • On Sale

    Japanese Saws - Ryoba

    From $37.90 April Sale! (inc GST)
    RRP: $44.90
     
  • On Sale

    Kaizen Foam Frame FC-02152

    April Sale! $12.67 (inc GST)
    RRP: $14.90
     
  • On Sale

    Kaizen Foam Organizer

    From $14.90 April Sale! (inc GST)
    RRP: $17.90
     
  • On Sale

    Layout Transfer Devices

    Marking over an edge is a common but sometimes difficult exercise in woodworking. These transfer devices take the guesswork out of this process. Made from durable 3mm alloy, each gauge has 60mm faces for use on large or small work pieces. Etched and painted graduations make measuring & marking even easier. Available in a 90/90 & 90/45 (S-62113) configuration. The 90/45 RH & 90/45 LH (S-62114) configuration is no longer available. This transfer device will pay for their usefulness man

    » View More

    From $33.90 April Sale! (inc GST)
    RRP: $39.90
     
  • On Sale

    Live Cup Boring Centre TLBC-0235

    April Sale! $33.90 (inc GST)
    RRP: $39.90
     
Results 1 - 96 of 120 Show: Sort By: