iGaging Snap Check Gauge
iGaging's Snap Check makes machine setups a snap! Dialing in truly accurate machine setups on your jointer, table saw and router table can be a fussy, frustrating pain in the neck. The Snap Check from iGaging makes tedious trial-and-error nightmares a thing of the past. You'll be amazed at the shop time you'll save setting up your equipment.
On the jointer, use it to set jointer knives, jointer table parallelism plus the precise depth-of-cut. On a table saw, set blades and dado sets for depth-of-cut and also measure blade run-out. On a router table, Snap Check is the perfect tool to set your fence to the exact location and to set your router bit to the perfect height.
It's is loaded with great features. Its large readout window can display hundredths of a millimetre, thousandths of an inch, or fractions to 1/64in. The precision, spring-loaded plunger signals the reading in a range from minus 6.4mm to a full 50.8mm height. It comes standard with both flat and ball tip anvils and a spare battery. Strong magnets hold the base in place on steel so you can make adjustments using both hands. It can be zeroed out with the push of a button and turns off automatically to save battery life.
- 3Way Reading: 0.1mm, 0.0005in, 1/64in
- Accuracy: ±0.001in / 1in
- Battery: 3V CR2032 included