iGaging Tools are fast building a reputation in the measuring tool industry for delivering exceptional innovation and quality with outstanding value-for-money. All research, development and design is done in California with manufacturing of all digital tools in their own factory in China and other tools outsourced to premium Asian manufacturers that perform OEM work for the major measuring tool brands around the world.

This means that iGaging are delivering tools at a fraction of the price that you would be paying for other premium brands whilst still performing to the same international standards or better across the range. All tools are checked and tested prior to leaving the factory (many with inspection reports included with the tool) so you know that you can rely on iGaging accuracy to make the most from your work.

Results 1 - 18 of 18 Show: Sort By:
  • 150mm Digital Protractor & T-Rule IG-35407-T

    A shorter version of the digital protractor (overall length 180mm), the addition of the 280mm long chrome-finished aluminium alloy fence turns the protractor into a digital sliding bevel. Because of the additional base, you will find it much easier to use due to the increased stability of the fence. Our pick for accurate angle measurements.

    » View More

    $44.90 (inc GST)
  • 205mm Digital Protractor IG-35408

    Two overlapping 1.15mm stainless blades with clear metric and imperial graduations are paired with a digital protractor angle sensor to measure and show the entire 360° range that is accurate to +/-0.2°. A great improvement for setting angles when laying out or for getting an accurate angle on an existing work piece to transfer. The reverse button flips the reading direction of the display on the large, clear LCD display. Overall length of 275mm.

    » View More

    $39.90 (inc GST)
  • 3rd-Gen AngleCube Bevel Gauge IG-352269

    $69.90 (inc GST)
  • Cast Combination Square System

    Combination square sets are one of the handiest measuring tools as the basic two-piece square set (ruler and try square head) can be used as a small spirit level, plumb level, internal and external try and mitre square, simple marking gauge and height gauge.

    The square head has a miniature scratch awl located in the base to mark work pieces with a face that can be used on 90 degree and 45 degree angles. The protractor head can move in a 180-degree range and also has a bright bubble level to check horizontal levels, while the centre marker head is handy for locating the centres of round work pieces.

    The iGaging set is machinist-shop quality to the US standard with accuracy over the blade of +/- 0.1 degree. All heads are heavy stabilized cast-iron and machined to standard. We doubt you will find another set with this kind of quality at this price. The 2.18mm satin ground blades are graduated in imperial on both sides. Both sets come with sturdy storage cases and will get a lot of use in your workshop.

    » View More

    From $54.90 (inc GST)
  • Depth Measuring Base for Verniers IG-100-D-68

    $14.90 (inc GST)
  • DigiAlign IG-350928

    $109.00 (inc GST)
  • Digital 3-in-1 Multi Gauge IG-350906

    The large LCD display measures heights and depths accurately up to 150mm in three planes – horizontally, vertically and at 45° in metric, decimalized and fractional imperial in 1/128th graduations! The heavy-duty polycarbonate frame can be used freestanding on flat surfaces so you can use both hands elsewhere and comes with a flat and pointed hardened steel anvil points. Can also be locked for extra accuracy. Accurate to within 0.15mm over the whole length of the range.

    » View More

    $29.90 (inc GST)
  • Digital MiniMag Height Gauge IG-35628

    Get engineering accuracy with the MiniMag Height Gauge. The powerful magnetic base clamps to any ferrous metal surface for precise measuring of saw blades, router bits or any other application. It has a very large, clear LCD display that reads in metric, decimalized and fractional imperial in 1/128th graduations. It is IP54-splash water, oil and dust resistant with accuracy over the whole 150mm length of 0.0254mm!

    » View More

    $89.00 (inc GST)
  • Digital Wheel Marking Gauge

    Wheel marking gauges are a massive leap forward as the wheel cutter can mark both with and across the grain. The wheel on this gauge is beveled on one side naturally creating a force that pulls the face of the gauge against your work piece for straight, accurate marking.

    Combine the marking accuracy of a wheel marking gauge with digital measuring accuracy. This gauge is perfect for getting your measurements done quickly for marking out with a massive, easy-to-read LCD display that reads in metric, decimalized and fractional imperial in 1/128th graduations. It is IP54-splash water, oil and dust resistant with a range of 0-150mm and accuracy up to 0.0254mm. The cutter can be recessed into the face and double as a depth gauge. Very well-made and a pleasure to use.

    » View More

    From $69.90 (inc GST)
  • Digital Woodworker's Snap Check Gauge IG-350907

    $39.90 (inc GST)
  • Double Squares

    Produced to the US standard (0.02mm tolerance), these handy squares have cast-iron machined bases with satin ground blades. The handle can be positioned anywhere along the blade to use as a layout tool as well as precision square.

    The blade is graduated in imperial on both sides, the 6in square has a spirit level in the handle. Like all iGaging products, very well made and a pleasure to use.

    » View More

    From $23.90 (inc GST)
  • Engineers Squares

    Produced to German DIN 875-1 Standard, these squares have a square tolerance of 0.005mm and straightness tolerance of 0.0127mm. The 4in square has a 2.18mm blade with 11.18mm base, while the 6in square has a heavy 2.4mm blade and 15.4mm base. Perfect weight in the hand – great to use and accuracy you can rely on.

    » View More

    From $24.90 (inc GST)
  • EZ-View Pro Digital Read Out Scales (DRO's)

    These digital readout kits can be adapted to any number of woodworking machines such as router lifts or tables, planers, table saws or milling machines, metal lathes etc. They have a crystal clear large remote LCD display connected with a 1300mm cord that can be disconnected for easy installation and access. 

    The large, easy to read display reads metric in 0.05mm increments as well as decimalized and fractional imperial in 1/64in increments and measures at 120" per second. The readout can be easily installed using magnets, double face tape, or screws. Vertical and horizontal slider mounting hardware is included.

    » View More

    From $64.90 (inc GST)
  • EZCal Digital Vernier Calipers

    From $49.90 (inc GST)
  • Magnetic Base LED Magnifier IG-36-LED-58

    $79.00 (inc GST)
  • Marking Knife IG-34360

    When marking accuracy is paramount, this marking knife will cut a line about 1/10th as wide as a sharp pencil line for greater accuracy. The blade is 38mm long with a comfortable handle that is 125mm long. It is flat on one side and beveled on the other, allowing you to draw the flat side across the reference piece to perfectly mark the edge. It is 100% reversible so is ideal for left or right-handed users. 

    » View More

    $14.90 (inc GST)
  • OriginCal Vernier Calipers

    From $89.00 (inc GST)
  • Wheel Marking/Mortice Gauge IG-34708

    $44.90 (inc GST)
Results 1 - 18 of 18 Show: Sort By: