Sharpening Products & Accessories

Please view products below or select from one of the following categories...

Results 1 - 79 of 79 Show: Sort By:
  • 1000/6000Grit Combination Bench Waterstone WS-16000

    A cost-effective method of buying two stones-in-one. Supplied as a reversible 1000/6000grit combination, this stone will suit most woodworkers as the 1000grit side can be used for preparing and dressing the tool, whilst the 6000grit stone can be used to finish the sharpening process.

    It is recommended to keep the 1000grit side suspended in a water bath when not in use.

     

    » View More

    $75.00 (inc GST)
     
  • 10in Wetstone Grinder

    From $349.00 (inc GST)
     
  • 10in Wetstone Grinder Angle Set-Up Jig SWGA-03

    $9.90 (inc GST)
     
  • 10in Wetstone Grinder Axe Jig SWGA-12

    $29.90 (inc GST)
     
  • 10in Wetstone Grinder Carving Tool Jig SWGA-16

    $19.90 (inc GST)
     
  • 10in Wetstone Grinder Diamond Truing Tool SWGA-06

    $49.90 (inc GST)
     
  • 10in Wetstone Grinder Long Knife Jig SWGA-10

    $44.90 (inc GST)
     
  • 10in Wetstone Grinder Machine Cover SWGA-08

    $16.90 (inc GST)
     
  • 10in Wetstone Grinder Metal Polish SWGA-04

    $14.90 (inc GST)
     
  • 10in Wetstone Grinder Plane Camber Jig SWGA-14

    $59.90 (inc GST)
     
  • 10in Wetstone Grinder Scissor Jig SWGA-11

    $57.90 (inc GST)
     
  • 10in Wetstone Grinder Short Knife Jig SWGA-09

    $39.90 (inc GST)
    Out of Stock
     
  • 10in Wetstone Grinder Stone Grader SWGA-05

    $8.90 (inc GST)
     
  • 10in Wetstone Grinder Straight Edge Jig SWGA-13

    Suits chisels, plane irons etc. up to 40mm wide » View More

    $29.90 (inc GST)
     
  • 10in Wetstone Grinder Tool Rest SWGA-17

    $21.90 (inc GST)
     
  • 10in Wetstone Grinder Turning Gouge Jig SWGA-15

    $39.90 (inc GST)
     
  • 10in Wetstone GrinderSupport Arm Extension SWGA-02

    $17.90 (inc GST)
     
  • On Sale

    125 x 25mm Double Handle Files MP-20015

    $20.00 Clearance! (inc GST)
    RRP: $39.90
     
  • 150 x 50mm Diamond Plates

    Ezelap diamond plates have been manufactured in the US since the 1970s and use a unique process and modern technology to produce the highest quality diamond plates. The continuous diamond plates cut the fastest and most efficiently, with the best edge produced of any diamond plate worldwide.

    The high-quality industrial-grade diamonds are bonded on to a 1/4in thick steel plate substrate to ensure perfect flatness and long-life durability. Once coated the plates are approximately 6.5mm thick.

    Unlike cheap Asian diamond plates, as the diamond surface wears down, more and more diamonds are exposed and the sharpener cuts faster. When more pressure the plate will cut even faster.

    With care these sharpeners can last a lifetime. 

    Also available in 200x75mm size.

    » View More

    From $59.90 (inc GST)
     
  • 150 x 50mm Double Sided Diamond Plates

    Most woodworkers need two grits to sharpen their tools – a medium or fine grit to touch up edges and super-fine to finsh off. These double-sided plates offer great value-for-money as you can get both in one compact package.

    Each sharpener is approximately 2.7mm thick and uses the same high-quality industrial diamonds as all Ezelap products and the two plates are set into a durable plastic cradle that maintains long-term durability and plate flatness.

    Plate size is 150x50mm with a number of grit combinations available.

    Also available in 200x75mm size.

    » View More

    From $99.00 (inc GST)
     
  • 200 x 75mm Diamond Plates

    Ezelap diamond plates have been manufactured in the US since the 1970s and use a unique process and modern technology to produce the highest quality diamond plates. The continuous diamond plates cut the fastest and most efficiently, with the best edge produced of any diamond plate worldwide.

    The high-quality industrial-grade diamonds are bonded on to a 1/4in thick steel plate substrate to ensure perfect flatness and long-life durability. Once coated the plates are approximately 6.5mm thick.

    Unlike cheap Asian diamond plates, as the diamond surface wears down, more and more diamonds are exposed and the sharpener cuts faster. When more pressure the plate will cut even faster.

    With care these sharpeners can last a lifetime. 

    » View More

    From $115.00 (inc GST)
     
  • 200 x 75mm Double Sided Diamond Plates

    Most woodworkers need two grits to sharpen their tools – a medium or fine grit to touch up edges and super-fine to finsh off. These double-sided plates offer great value-for-money as you can get both in one compact package.

    Each sharpener is approximately 2.7mm thick and uses the same high-quality industrial diamonds as all Ezelap products and the two plates are set into a durable plastic cradle that maintains long-term durability and plate flatness.

    Plate size is 200x75mm with a number of grit combinations available.

    » View More

    From $159.00 (inc GST)
     
  • 203 x 70mm Double Sided Diamond Plate MP-20019

    $149.00 (inc GST)
     
  • 24in Planer Blade Sharpener

    This grinder is purpose-built to sharpen jointer and planer blades up to 24in long. It works by running the 6in aluminium oxide wheel horizontally with a 375W (1/2HP) motor running at 2800RPM, and the blade carriage passing across the face of the stone.

    The carriage is adjustable to suit all bevel angles for machine blades. Remove the carriage and use the included small tool jig for grinding planer blade and cabinet chisels, or attach the drill bit sharpening attachments to touch up your twist drills.

    Solid cast-iron body construction with included cast-iron base for extra stability when in use. This unique machine will quickly save time and hassle by moving your sharpening service in-house.

    » View More

    From $479.00 (inc GST)
     
  • 50 x 20mm Diamond Hand Laps

    These hand laps are the versatile little sharpeners that can. On a durable 100x19mm plastic handle they are great for sharpening virtually anything – scissors, spade bits, knives, fish hooks or anything else you can think of. Available in a wide range of grits or as two different kits.

    » View More

    From $24.90 (inc GST)
     
  • 6in & 8in Bench Grinders

    From $99.00 (inc GST)
     
  • 75 x 25mm Diamond Plate 26-F

    These diamond plates are perfect for hunting and fishing knives, woodworking tools, blades, axes and industrial use. No oil or water is necessary, the surface will remain true and flat. Includes a groove for fish hooks and comes with durable leather pouch for storage.

     

    » View More

    $19.90 (inc GST)
     
  • 80 x 50mm Diamond Plates

    A great economy option to the bigger and heavier diamond plates. The high-quality industrial-grade diamonds are bonded to a thin flat steel plate substrate and are great for small woodworking tools and other items needing a keen edge. Approximate thickness is 1.35mm Available in a variety of grits.

     

    » View More

    From $23.90 (inc GST)
     
  • 80 x 50mm Double Sided Diamond Plate MP-20011

    $39.90 (inc GST)
     
  • 8in Slow Speed Bench Grinder MDN-200-SL

    $199.00 (inc GST)
    Out of Stock
     
  • Abrasive Lapping Grit Kit 05-M-0101

    Silicon carbide is ideal for flattening oil and water stones or lapping plane bottoms and blades. Just sprinkle the grit on a piece of glass or a steel lapping plate, add a shot of oil or water (as required), and lap the item flat. This fast and easy process lets you keep all of your stones dead flat.

    90x is used for most applications, while the finer grits are used to put a silky finish on plane bottoms or blades. Grits are available individually or as a set of five 2 oz containers of 90x, 180x, 280x, 400x and 600x and instructions. The 90x is also available in a larger 4 oz container.

    Using PSA-backed plastic laminate sheets on glass speeds up the process, but is not mandatory. 

    » View More

    $44.00 (inc GST)
     
  • Alloy Honing Guide MJ-817

    A simple universal design that has been around for years and still “does the job”. This one is manufactured in Taiwan so has clean, accurate castings and is well assembled. Will clamps any blades 3.2 – 76.1mm wide and runs on a a simple alloy wheel on the stone. Great value-for-money.

    » View More

    $14.90 (inc GST)
     
  • Aluminium Oxide Bench Grinder Wheels

    Aluminium oxide grinding wheels are the woodworker’s choice for bench grinding wheels as they provide a cool yet maximum cutting rate on hardened tool and high-speed steel commonly found in woodworking tools.

    The grit refers to the density of the crystalline structure of the plate – the higher the density the slower the material stock removal – therefore acting as a “finer grit” but this also can lead to increased heat build-up with the chance of changing the structure of the cutting edge or “burning” the edge.

    We generally recommend a 46 or 60 “Grit” wheel for most woodworking applications.

    We have sold the Abrasiflex grinding wheels for more than 20 years now because –

    ·      The white aluminum oxide is held in a premium vitrified bond

    ·      Each wheel contains nested bushings to accommodate a wide variety of standard arbor sizes

    ·      The performance of Abrasiflex wheels is on par with other brands but offers great value-for-money

    » View More

    From $29.90 (inc GST)
     
  • Arkansas Oil Stone KIR-3706

    $76.50 (inc GST)
     
  • Arkansas Oil Stone Sharpening Set KIR-3703

    $79.90 (inc GST)
     
  • Arkansas Slip Stone Set of 4 KIR-3704

    $49.90 (inc GST)
     
  • Bench Grinder Skew Grinding Jig 05-N-1301

    Skews are among the trickiest tools to use in turning without causing digs.

    To prevent digs, this jig allows you to grind a slight radius rather than a straight 20° skew. It can be used on just about any grinder; all you need to do is drill a 6.4mm (1/4in) hole in the tool rest (if required) to hold the base pin.

    The radius of the grind is determined by the amount the skew projects from the jig. After grinding one side, you flip the skew to the other side of the jig and repeat.

    The skew is clamped in position, which leaves both hands free to regulate grinding pressure and travel across the wheel.

    The pin is steel; otherwise, the jig is brass and anodized aluminum.

    » View More

    $51.00 (inc GST)
     
  • Bench Grinder Straight Grinding Jig 05-M-0601

    This grinding jig works with any power or hand grinder that has a tool rest.

    Put a tool in the jig, slide it against the alignment pin and one clamping thumbscrew to square it, adjust the blade projection for bevel angle, and tighten in place. The tool is now held squarely in the jig at the chosen bevel angle. Slide the jig back and forth across the tool rest and stone face to sharpen the tool.

    The brass clamping bolts have nylon washers to prevent galling; other parts are made from hard aluminum, further hardened by anodizing to prevent wear. High-friction pads ensure solid clamping without inadvertent misalignment.

    The jig fits in the slot of the Veritas® Grinder Tool Rest (05-M-2301); the riding ledges adapt it to other tool rests.

    » View More

    $44.00 (inc GST)
     
  • Bench Grinder Toolrest Turning Tool Jig CJ-05-WT

    $19.90 (inc GST)
     
  • Bench Grinder Universal Toolrest 05-M-2301

    The major weakness of most bench grinders is that the tool rests are virtually useless. It is nearly impossible to find one with a rest that is solid and square.

    The Veritas® Grinder Tool Rest can be used with 6in or 8in utility bench grinders and many belt sanders/grinders. It mounts directly to the bench in front of the grinder and can be readily folded out of the way for freehand grinding.

    The 102mm wide table straddles wheels up to 25mm wide. It is grooved for sliding jigs and center drilled for rotating jigs. The slotted arms allow a wide range of angular and height adjustments. Spring-loaded gyratory handles lock it solidly in position and can be rotated out of the way after locking. You can easily move it from one grinder to another or quickly remove it from the bench.

    Accurately machined, anodized aluminum construction. Included is an angle-setting gauge to set the table to the common bevel angles of 20°, 25°, 30° and 35°.

    » View More

    $86.00 (inc GST)
     
  • Bench Grinder Universal Toolrest Kit CJ-05

    This accessory suits 6in and 8in bench grinders and is capable of a wide range of angles, making it versatile for sharpening virtually all woodworking tools.

    ·      Large 152 x 85mm working surface

    ·      Maximum height of table when positioned flat is 150mm

    ·      Includes mitre guide to use as a guide when sharpening square edges blades

    ·      Spring loaded clamping handles lock the table in place securely and stay out of the way

    ·      Creates a hollow ground bevel which, when honed, creates a razor sharp edge

    PLEASE NOTE – new tool rest will be available in black when back in stock in mid-July.

    » View More

    $49.90 (inc GST)
     
  • Bench Grinder Wheel Dressing Stick - Carborundum 86095-CS

    A simple method of dressing grinder wheels – the coarse grit is harder than aluminium oxide and will slowly but effectively true up the plate and expose new a cutting face on bench grinder wheels.

    » View More

    $8.50 (inc GST)
     
  • Bench Grinder Wheel Dressing Stick - Diamond DTBAR-1

    $19.90 (inc GST)
     
  • Bench Stone Holder BSH-100

    Stop your water stone sliding all over the bench. Made in Japan of quality stainless steel and non-slip rubber so that it can be used to suspend in your water bath when not in use, this will hold stones of any width and thickness and a length of 180-230mm.

    » View More

    $34.90 (inc GST)
     
  • Bench Waterstone - Superfine WS-8000

    For the ultimate edge on your tools you can’t go past this stone. A very generous size for all chisels and plane blades (210 x 73 x 22mm), this stone comes on its own stand. The abrasive used in the manufacture of this stone is of the highest purity, ensuring that you receive a top-quality man-made stone.

    Once you have sharpened on this stone you can virtually skip lapping the edge of your tool and get straight into use.

    Comes with its own cleaning stone.

    » View More

    $139.90 (inc GST)
     
  • Bench Waterstones - Coarse

    King is the major producer of manufactured ceramic waterstones in Japan and for good reason – they produce the best low-cost manufactured stones in the country and generally regarded as the industry-standard waterstone, not only in Japan but also Australia.

    The 800grit stone is for repairing major nicks in your woodworking blades and chisels or for your general household sharpening. The 1200grit stones are perfect for giving your tools a quick touch-up if you sharpen regularly before moving on to your finer grit stones.

    These stones should be stored in water when not being used.

    » View More

    From $37.90 (inc GST)
     
  • Bench Waterstones - Fine

    Used for the final sharpening process – simply sprinkle a few drops of water on for lubrication and put that razor-sharp edge on your tools. The 4000 grit stone is good value-for-money whilst 6000 grit will provide a very fine edge for a few more bucks.

    Both stones measure 185 x 65 x 19mm and come mounted on a plastic base for ease of use on a bench.

    » View More

    From $39.90 (inc GST)
     
  • Blade Honing Compound 05-M-0801

    This honing compound, which took over two years to develop, is the most effective on the market.

    It is a blend of both chromium and aluminum oxide to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather or wood.

    Cuts quickly but it leaves a mirror finish with a light wax film. The average size of scratch pattern it leaves behind is 0.5 microns or 0.00002in. Ideal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Used with a felt wheel or leather belt for power honing or with a leather strop for hand honing.

    » View More

    $24.00 (inc GST)
     
  • Brass Bevel Angle Gauge 50-K-0901

    Half the secret of sharpening is the control of blade geometry. Nothing is handier than a bevel gauge for quickly checking the grind angle of chisels, plane blades, turning tools, etc. A quick check confirms the angle last used for grinding or honing so that the edge geometry can be maintained.

    The Veritas bevel gauge has seven individual slots that will measure the most commonly used angles from 15° to 45° in 5° increments. Your eye is a fine instrument; it can easily interpolate other angles in the range, angles like 24° or 26°.

    The slots on the gauge are about 19mm deep for good registration. The pocket-sized disc is 63mm in diameter with a center hole for hanging it on a nail.

    Made of solid brass, which will not damage a honed edge and made in USA.

     

    » View More

    $15.00 (inc GST)
     
  • Circular Saw Blade Sharpener YF-870

    A simple yet effective benchtop machine so you can sharpen your own circular saw blades when you need to! As it is a manual sharpening machine it will take a short bit of experience to get efficient at sharpening your blades but practice will quickly improve sharpening times.

    It is easy to setup and use straight out of the box. The spec’s for the machine and blades that can be sharpened are –

    ·      Efficient 250W motor drives 125mm diamond coated grinding wheel

    ·      Wheel can be tilted +/- 20°            to suit alternate-tooth bevel (ATB) blades

    ·      Cradle can be swiveled to suit all positive and negative-rake blades

    ·      Can sharpen blades 160 - 500mm diameter

    ·      Heavy-duty cast-iron base for extra stability

    » View More

    $379.00 (inc GST)
    Out of Stock
     
  • Deluxe Honing Guide MJ-847

    This guide will clamp blades and chisels anywhere from 0 – 63mm by sandwiching the blade between the base and clamp. The brass nuts and nylon washers make it easy to have good clamping pressure without over-tightening and damaging your tool or the guide.

    The 40mm-wide brass roller provides stability when rolling on the stone. This can be removed to expose a ledge that can then be run against your bench grinder tool rest to use as a straight grinding jig. 

    » View More

    $24.90 (inc GST)
     
  • On Sale

    Diamond Stone Holders MP-20021

    Clearance! $7.50 (inc GST)
    RRP: $19.90
     
  • Diamond/Ceramic Double-Sided Stone CD-4

    This double-sided plate is a super-fine diamond/ceramic combination finishing stone to give you the finest edge possible on all tools. No need to strop once you have used one of these. Comes with a durable quality leather pouch.

     

    » View More

    $34.90 (inc GST)
     
  • On Sale

    Fasttrack Knife Sharpener MP-20079

    November Sale! $64.90 (inc GST)
    RRP: $74.90
    Out of Stock
     
  • On Sale

    Fasttrack Sharpening System

    From $135.00 (inc GST)
     
  • Fasttrack Sharpening System Stropping Attachment MP-20095

    $24.90 (inc GST)
     
  • Felt Buffing Wheels

    The finest edge you can get on any tool is with a strop or a buffing wheel. Unfortunately, it is difficult to get that edge without rounding the bevel somewhat when using a wheel. In certain cases (such as with carving tools), a rounded bevel may be desirable, but with chisels and plane blades, it is best to maintain a predetermined bevel angle. A hard felt wheel is best for that.

    When the wheel is dressed with the Veritas blade honing compound, the edge obtained is comparable to most razor blades.

    A medium felt wheel is still very firm, but is more suitable for carving tools where controlled bevel rounding is desirable to give edge strength. A narrow, medium felt wheel is best for the inside of carving gouges.

    All felt wheels are bored for 15.9mm (5/8in) diameter arbors, but a 12.7mm (1/2in) bushing is provided. Maximum speed rated to 3600rpm.

    » View More

    From $62.00 (inc GST)
     
  • Foldable Hand Lap - Dual Grit 510

    EZE-Fold models have a carrying case that unfolds into a handle. When closed the case protects the diamond surface and when open, the case becomes a functional handle.

    Get two popular grits – 400 and 1200-Grit in the one unit. The diamond plate areas measure 102 x 19mm each.

    » View More

    $59.90 (inc GST)
     
  • Foldable Hand Lap - Oval 591

    EZE-Fold models have a carrying case that unfolds into a handle. When closed the case protects the diamond surface and when open, the case becomes a functional handle.

    A great shape for a variety of applications including the sharpening of kitchen knives plus other long sharp edges. Available in the most popular 600-Grit (fine) model.

    » View More

    $44.90 (inc GST)
     
  • Grey Iron Lapping Plate 05-M-2020

    Measuring 305 x 105 x 29mm high and weighing approximately 6.35kg, this is one substantial lapping plate! Made from an iron chosen for its dimensional stability and material consistency (you won't find blade-scratching carbides in the material), the bottom and sides are machined, and the top is ground flat to within 0.025mm over the entire surface. The unique channel design, optimized for a figure-eight lapping pattern, serves to eliminate resistance from hydraulic lock and captures excess oil, abrasive and slurry.

    For fingertip safety, the channels have been chamfered to eliminate sharp edges and corners. Not intended for heavy material removal, it is designed to condition or smooth previously ground surfaces and is used with light mineral or honing oil and silicon carbide (SiC) abrasive grit.

    Veritas offer a range of grits, but recommend 280x for twisted, wavy or linished objects, 400x for ground surfaces with a slightly rough texture, and 600x for surfaces requiring little material removal. While any grit size will ultimately achieve the same end result (since particles become progressively finer during the lapping process), the coarser the abrasive, the longer it takes to achieve a smooth surface.

    A useful tool for improving the surface quality of plane soles, blades and chisels, it will lap materials up to the same surface area of the lapping plate, accommodating even a jack plane sole.

    » View More

    $163.00 (inc GST)
     
  • HeliGrind Turning Tool Sharpening Kit HGK-01

    $179.00 (inc GST)
     
  • Lubricant/Rust Inhibitor Camellia Oil CO-240

    Japanese craftsmen have used this oil for generations as an effective rust inhibitor. It can also be used a liquid lubricant when sharpening if water is not suitable. 

    » View More

    $30.00 (inc GST)
     
  • MK II Sharpening System

    The key to consistent and fast honing is repeatability – and this guide delivers it in spades. Whether you're a sharpening veteran or just starting out, this versatile guide lets you concentrate on sharpening without worrying about controlling blade angle at the same time. This makes your honing reliable, accurate and consistent.

    The original standard Mk II honing guide includes the standard clamping head, straight roller base and angle registration jig. It's the option most useful for woodworkers who mostly use planes and other wide blades. It accepts blades between 12.7mm and 73.0mm wide and up to 11.9mm thick, including skew blades. It hones bevel angles from 15° to 54° and back bevels from 10° to 20°.

    Offering an impressive range of angle settings, the integral blade angle registration jig squares the blade and sets the bevel angle in one easy step. A scale and sighting mark help center blades when using the standard head. Once the blade is clamped, the jig slides off the guide.

    The optional Veritas Skew Registration Jig locks into the MkII honing guide to make quick work of setting both skew and bevel angles (left- or right-hand) of chisel and plane blades.

    The jig's machined aluminum base provides skew angle markings that are laser etched for accuracy and legibility. The skew angle graduations cover the range of 10° to 45° in 5° increments, and there are additional marks (18°, 22°, 28°) to cover the angles of popular skew plane blades.

    The base has four distinct tracks providing four bevel angle settings: 20°, 25°, 30°, and 35°. (The honing guide's eccentric roller allows variation from these angles for creating a micro-bevel.) The unique sliding fence with blade stop allows you to match an existing skew angle visually – even if it is non-standard.

    The included straight roller hones straight edges. At 50.8mm wide, it provides a stable base for even the narrowest of blades. The barrel-shaped camber roller (available separately) lets you rock the guide slightly to hone a slight curve or camber into a blade edge, eliminating blade tracks when planing.

    » View More

    From $119.00 (inc GST)
     
  • MK II Sharpening System Narrow Blade Holder 05-M-0909

    $86.00 (inc GST)
     
  • Multi-Form Water Slip Stones

    These Japanese manufactured stones have a series of concave forms, ideal for honing carving chisels. Also included is one double-sided convex slip stone for inside the gouge.

    » View More

    From $59.00 (inc GST)
     
  • Nagura Stone Cleaner NGS-1

    $18.00 (inc GST)
     
  • Natural Belgian Crumb Stones

    From $25.90 (inc GST)
     
  • Pen Hand Lap - D-Shape SPEN

    This diamond sharpener is 57mm long with a D-shaped shaft. It has a groove for fishhooks and opens out to 138mm when assembled. It stores in the pen-type cap. The D-shape is perfect for using on a variety of shapes with the ability to turn it to suit the sharpened surface.

    » View More

    $17.90 (inc GST)
     
  • Pen Hand Lap - Tapered STPEN

    This diamond sharpener is 57mm long with a taper shaft so is perfect for serrated blades. It opens out to 138mm when assembled and stores in the pen-type cap. 

    » View More

    $19.90 (inc GST)
    Out of Stock
     
  • On Sale

    Planer Blade Hones

    From $17.90 November Sale! (inc GST)
    RRP: $19.90
     
  • Router Bit Sharpener MP-20009

    $34.90 (inc GST)
     
  • Single Face Leather Strop PW-14

    $26.00 (inc GST)
     
  • Steel Honing & Lapping Plate 05-M-4001

    $44.00 (inc GST)
     
  • Stone Honing Oil KIR-3708

    $17.90 (inc GST)
     
  • Stone Pond 05-M-2006

    The Stone Pond is a complete system to store, use and maintain water stones up to 305mm long. Stones can be stored, ready for use, in a stand that also clamps them and provides a base for lapping. The twin-clamping system holds both coarse and fine stones at the same time and the quick-acting cam clamps are fully adjustable. There is ample space for three or more bench stones. Stones are kept clean and evaporation is minimized.

    The clamp hardware is stainless steel, anodized aluminum, and glass-reinforced plastic. The tough, rigid ABS case has high-friction pads for non-slip use. The lapping system is a glass plate, a sheet of PSA-backed plastic laminate, and 90x silicon carbide. The safety-glass top is guaranteed to be flat enough to allow you to lap a stone to a flatness better than 0.025mm per 25mm of stone length. You can put your coarse stone (800x, 1000x or 1200x) in the water and leave your wooden-based finishing stone (4000x or 8000x) clamped on a bar. For stones sitting in the water, ribs on the box bottom keep them clear of any sludge. The clamping and lapping part of the system can be used equally effectively with oil stones.

    This is a fast, clean, dependable system for use with all of your bench water stones.

    » View More

    $100.00 (inc GST)
     
  • Strop Honing Compound KIR-0375

    $11.50 (inc GST)
     
  • Water Slip Stones

    From $25.00 (inc GST)
     
  • Waterstone Flattening Ceramic Plate WSF-150

    $38.00 (inc GST)
    Out of Stock
     
Results 1 - 79 of 79 Show: Sort By: