Measuring & Marking Products

Results 1 - 88 of 88 Show: Sort By:
  • 100mm Sliding Bevel 115-MW

    $29.90 (inc GST)
     
  • 150mm Digital Protractor & T-Rule IG-35407-T

    A shorter version of the digital protractor (overall length 180mm), the addition of the 280mm long chrome-finished aluminium alloy fence turns the protractor into a digital sliding bevel. Because of the additional base, you will find it much easier to use due to the increased stability of the fence. Our pick for accurate angle measurements.

    » View More

    $44.90 (inc GST)
    Out of Stock
     
  • 160mm Precision Protractor IRP-100

    Incra have reinvented the protractor by putting extra long guide slots at every 45°, 30°, 22.5°, 5°, 1° and 0.5° interval to plot any angle with ease and absolute accuracy. If you take a few seconds to remove the T-bar you will also have an excellent 160mm rule with micro-fine marking holes at every 1mm.

    » View More

    Great Xmas Gift! $49.90 (inc GST)
    RRP: $54.90
     
  • 205mm Digital Protractor IG-35408

    Two overlapping 1.15mm stainless blades with clear metric and imperial graduations are paired with a digital protractor angle sensor to measure and show the entire 360° range that is accurate to +/-0.2°. A great improvement for setting angles when laying out or for getting an accurate angle on an existing work piece to transfer. The reverse button flips the reading direction of the display on the large, clear LCD display. Overall length of 275mm.

    » View More

    $39.90 (inc GST)
     
  • 230mm Beech Sliding Bevel 116-BW

    $29.90 (inc GST)
     
  • 230mm Bespoke Brass Sliding Bevel 116-XW

    Great Xmas Gift! $69.90 (inc GST)
    RRP: $89.00
     
  • 230mm Rosewood Sliding Bevel 116-W

    $44.90 (inc GST)
    Out of Stock
     
  • 3rd-Gen AngleCube Bevel Gauge IG-352269

    $69.90 (inc GST)
     
  • AccuScribe Pro FC-98036

    $29.90 (inc GST)
    Out of Stock
     
  • Adjustable Try Square 124-XW

    Try squares can be a problem in the workshop if they lose accuracy. The reason for this is either that the blade has been knocked or the timber in the handle has moved over time. This pocket size square overcomes the problem by allowing the blade to be adjusted, relative to the handle. This is done by two small screws found in the bottom of the handle. The square features a 3mm solid brass stock on the handle to protect it and a 2mm thick solid brass blade. 100mm long blade.

    » View More

    Great Xmas Gift! $59.90 (inc GST)
    RRP: $75.00
     
  • Aluminium 968mm Straight Edge ASE-968

    $49.90 (inc GST)
    Out of Stock
     
  • Aluminium Straight Edges

    From $55.00 (inc GST)
     
  • Angle Poly Gauge 05-N-1401

    Many woodworkers find it hard enough to set equipment for a square cut; they simply give up on cuts for pentagons, hexagons, octagons, etc. The Veritas® Poly-Gauge changes all that.

    » View More

    $60.00 (inc GST)
     
  • Automatic Centre Punch MJ-845

    The 98mm long knurled brass handle fits comfortably in the hand and 25mm long hardened steel point makes marking centre points quick and easy. The point will press easily into softwoods but by pushing down on the handle the snap spring will mark a deep point in the hardest materials quickly and accurately. Sharpen the point to use as a scratch awl as well.

    » View More

    $8.90 (inc GST)
     
  • Bar Gauge Heads 05-N-3101

    This practical tool provides you with the ability to transfer measurements accurately and efficiently. This system has been is use for centuries and is still used to create 'story sticks' for fit outs and jobs where nothing is square, It is also ideal to check diagonals or to mark out for repetition jobs. Using material 19mm x 6mm you are able to use standard timber sizes and rip two 6mm strips from one edge. They are made of durable ABS plastic and solid brass.

    » View More

    $27.00 (inc GST)
    Out of Stock
     
  • Brass Marking Gauge 05-N-6501

    $51.00 (inc GST)
    Out of Stock
     
  • Carpenter's Square EG-6040

    $24.90 (inc GST)
     
  • Carpenter's Square Fence 05-N-5401

    A carpenter's square is frequently needed just because of its size. The key disadvantage of such a square (its lack of a supporting fence ledge) can now be eliminated using a Veritas® Square Fence.

    » View More

    $42.00 (inc GST)
    Out of Stock
     
  • Carpenters FramingSquare

    From $14.90 (inc GST)
    Out of Stock
     
  • Carpenters Gauge 05-N-3601

    Specifically designed to be carried in an apron or pocket, this is both a direct-reading compass and marking gauge. It has a rotatable head, which locks vertically for use and horizontally for storage and tip protection. It is direct reading both radius and diameter, in inches and centimetres.

    » View More

    $44.00 (inc GST)
     
  • Cast Combination Square System

    Combination square sets are one of the handiest measuring tools as the basic two-piece square set (ruler and try square head) can be used as a small spirit level, plumb level, internal and external try and mitre square, simple marking gauge and height gauge.

    The square head has a miniature scratch awl located in the base to mark work pieces with a face that can be used on 90 degree and 45 degree angles. The protractor head can move in a 180-degree range and also has a bright bubble level to check horizontal levels, while the centre marker head is handy for locating the centres of round work pieces.

    The iGaging set is machinist-shop quality to the US standard with accuracy over the blade of +/- 0.1 degree. All heads are heavy stabilized cast-iron and machined to standard. We doubt you will find another set with this kind of quality at this price. The 2.18mm satin ground blades are graduated in imperial on both sides. Both sets come with sturdy storage cases and will get a lot of use in your workshop.

    » View More

    From $54.90 (inc GST)
     
  • Centre Finder MJ-831

    A simple and very effective device to find the centre of round stock. Simply place the centre of the finder on the work piece, mark once then move to another edge and mark again. The crosshair formed by this should be very close to the centre of your work.

    » View More

    $6.90 (inc GST)
     
  • Centre Marker 05-N-1501

    Made from die-cast aluminium (pre-drilled for mounting near your lathe), it uses a knife-edged steel blade to score the end of a work piece. You set a square or cylinder (up to 150mm across) in the marker, tap it with a mallet, turn the wood approximately 90 degrees and tap it again. The result is two score lines that intersect at the exact centre of the wood.

    » View More

    $44.00 (inc GST)
     
  • Depth Gauge MC-8601

    •        Durable metal scale measures in inches or millimeters

    •        Thumb lever for easy lock and release of scale

    •        Wide base with large feet

    •        Straddles most table saw throats for measuring while adjusting

    •        Self-standing - Allows a depth to be set while bringing the blade or bit up to the desired level

    •        Large scale markers and view finder - Easily viewed for accurate adjustments

    » View More

    $9.90 (inc GST)
     
  • Depth Measuring Base for Verniers IG-100-D-68

    $14.90 (inc GST)
     
  • DigiAlign IG-350928

    $109.00 (inc GST)
     
  • Digital 3-in-1 Mortice Gauge IG-35777

    Instead of a single wheel, this gauge has a pin as well as a secondary pin attachment to use as a mortice gauge. It also has another pin that replaces the 4.90mm thick machined flat gauge face to use as a divider/compass. Just like the digital wheel marking gauge, this gauge is made to same high quality standards as all iGaging products with an accuracy of up to 0.0254mm over the 150mm range. 

    This gauge is perfect for getting your measurements done quickly for marking out with a massive, easy-to-read LCD display that reads in metric, decimalized and fractional imperial in 1/128th graduations. It is IP54-splash water, oil and dust resistant. Very well-made and a pleasure to use.

    » View More

    $79.90 (inc GST)
     
  • Digital 3-in-1 Multi Gauge IG-350906

    The large LCD display measures heights and depths accurately up to 150mm in three planes – horizontally, vertically and at 45° in metric, decimalized and fractional imperial in 1/128th graduations! The heavy-duty polycarbonate frame can be used freestanding on flat surfaces so you can use both hands elsewhere and comes with a flat and pointed hardened steel anvil points. Can also be locked for extra accuracy. Accurate to within 0.15mm over the whole length of the range.

    » View More

    $29.90 (inc GST)
     
  • Digital Micrometer IG-35054-U-01

    $99.00 (inc GST)
     
  • Digital MiniMag Height Gauge IG-35628

    Get engineering accuracy with the MiniMag Height Gauge. The powerful magnetic base clamps to any ferrous metal surface for precise measuring of saw blades, router bits or any other application. It has a very large, clear LCD display that reads in metric, decimalized and fractional imperial in 1/128th graduations. It is IP54-splash water, oil and dust resistant with accuracy over the whole 150mm length of 0.0254mm!

    » View More

    $89.00 (inc GST)
     
  • Digital Thickness Gauge IG-35-OD-8-H

    Take exact measurements of your woodturning and many other work pieces. The spring-loaded jaws are accurate to 0.254mm. The large digital display reads measurements in metric, as well as decimalized and fractional imperial in 1/128th graduations. The thumbscrew tightens to lock blade in place to maintain any position and easy-grip handle offers additional control when in use. 

    » View More

    $54.90 (inc GST)
     
  • Digital Wheel Marking Gauge

    Wheel marking gauges are a massive leap forward as the wheel cutter can mark both with and across the grain. The wheel on this gauge is beveled on one side naturally creating a force that pulls the face of the gauge against your work piece for straight, accurate marking.

    Combine the marking accuracy of a wheel marking gauge with digital measuring accuracy. This gauge is perfect for getting your measurements done quickly for marking out with a massive, easy-to-read LCD display that reads in metric, decimalized and fractional imperial in 1/128th graduations. It is IP54-splash water, oil and dust resistant with a range of 0-150mm and accuracy up to 0.0254mm. The cutter can be recessed into the face and double as a depth gauge. Very well-made and a pleasure to use.

    » View More

    From $69.90 (inc GST)
     
  • Digital Woodworker's Snap Check Gauge IG-350907

    $39.90 (inc GST)
     
  • Double Squares

    Produced to the US standard (0.02mm tolerance), these handy squares have cast-iron machined bases with satin ground blades. The handle can be positioned anywhere along the blade to use as a layout tool as well as a precision square.

    The blade is graduated in imperial on both sides, the 152mm (6in) square has a spirit level in the handle. Like all iGaging products, very well made and a pleasure to use.

    » View More

    From $23.90 (inc GST)
     
  • Dovetail Markers

    For quick, accurate marking of dovetails, a dovetail marker is the best tool available. With riding ledges on both sides, these 2" x 2" markers can be flipped over to mark both slopes of the dovetail. Sold as a set of 2.

    » View More

    From $22.00 (inc GST)
     
  • Engineer's Mini Mag Square FC-80569

    $39.90 (inc GST)
     
  • Engineers Squares

    Produced to German DIN 875-1 Standard, these squares have a square tolerance of 0.005mm and straightness tolerance of 0.0127mm. The 4in square has a 2.18mm blade with 11.18mm base, while the 6in square has a heavy 2.4mm blade and 15.4mm base. Perfect weight in the hand – great to use and accuracy you can rely on.

    » View More

    From $24.90 (inc GST)
     
  • Engineers Straight Edges

    When you need to setup a machine, mark accurate layouts, do some drafting or checking straightness of your work piece for warping, this precision straight edge is the essential tool you need. The 5.00mm hardened steel blades are meticulously ground and lapped for straightness and parallelism, and they have a beveled knife edge with imperial 1/64in scales, which means they can be used as precision rulers. For storage they have a hanging hole as well as a protective case if you prefer to store them in a drawer. Accurate to 0.025mm over the length of blade.

     

    » View More

    From $39.90 (inc GST)
     
  • Exactor MC-8406

    Great Xmas Gift! $13.90 (inc GST)
    RRP: $17.90
     
  • EZ-View Pro Digital Read Out Scales (DRO's)

    These digital readout kits can be adapted to any number of woodworking machines such as router lifts or tables, planers, table saws or milling machines, metal lathes etc. They have a crystal clear large remote LCD display connected with a 1300mm cord that can be disconnected for easy installation and access. 

    The large, easy to read display reads metric in 0.05mm increments as well as decimalized and fractional imperial in 1/64in increments and measures at 120" per second. The readout can be easily installed using magnets, double face tape, or screws. Vertical and horizontal slider mounting hardware is included.

    » View More

    From $64.90 (inc GST)
     
  • EZCal Digital Vernier Calipers IG-1003338-B

    $49.90 (inc GST)
     
  • Graduated Try Square SQ-01250

    Produced to the US Standard (0.02mm tolerance), this square is perfect for general-purpose work. Stainless acid-etched graduated blade – metric one side, imperial the other – with a massive hardened chrome finish 17.5mm thick steel base.  While we like using the engineer’s square for setting up machines etc. we’ve found this is THE go-to square for general layout work.

    » View More

    $32.90 (inc GST)
     
  • Incra Precision Bend Rules

    Incra Bend Rules make dual-surface layouts a snap using the corner slots. It also provides zero-parallax measuring on any flat surface. Micro-fine marking holes at every ¼mm instantly locate your sharp pencil point exactly on target with zero uncertainty and no eye-strain! The? 90° shape holds it snugly in place and there are even two vertical end scales for drawing precision parallel lines relative to the edge of your work.

    » View More

    From $29.90 (inc GST)
     
  • Incra Precision Centring Rule IRC-300

    Find the exact centre of any work piece up to 300mm wide. In addition to top and bottom micro-fine marking holes at every 1mm it also has a built-in protractor with guide slots at every 45°, 30°, 22.5°, and 5° interval.

    » View More

    $34.90 (inc GST)
    Out of Stock
     
  • Incra Precision Measuring Rule

    Incra scores again with its precision steel rule. Select the proper slot or hole, insert a .5mm mechanical pencil, and mark the measurement with dead-on accuracy. These Marking Rules are precisely what's needed for accuracy by offering marking holes at every ¼mm! This is unmatched in the industry of marking rules.

    » View More

    From $17.90 (inc GST)
     
  • Incra Precision T-Rules

    With the addition of a fence you can now quickly and accurately mark anything from a work piece edge, as well as use the T-rule as an accurate layout square. Slide the fence along the work piece with 0.5mm mechanical pencil or scribe in place to use as a marking/mortice gauge too. The end has height marking slots 50mm high to expand its usefulness even more. 

    » View More

    From $34.90 (inc GST)
     
  • Incra Rule Pencil IRPENCIL

    We include this pencil with every rule purchase but this great quality 0.5mm mechanical pencil is also available separately. Great for use with both the range of Incra rules and other measuring tools but also separately for anything else in the workshop or onsite.

    » View More

    $2.00 (inc GST)
    Out of Stock
     
  • Layout Saddle - Dovetails

    From $26.00 (inc GST)
     
  • Layout Saddle - Mitres 05-N-5615

    The compact mitre saddle is ideal for marking 45º angles on small items such as picture frames. The sides are machined so that a line can be accurately transferred around work piece corners. Light and durable, it will never mark your work.

    » View More

    $27.00 (inc GST)
    Out of Stock
     
  • Layout Saddle - Square 05-N-5601

    $27.00 (inc GST)
    Out of Stock
     
  • Lie Flat Trammel Set MP-20041

    Great Xmas Gift! $44.90 (inc GST)
    RRP: $49.90
     
  • Long Nose Pattern Markers

    From $8.50 Great Xmas Gift! (inc GST)
    RRP: $9.90
     
  • Mag Shim Set FC-04151

    $34.90 (inc GST)
    Out of Stock
     
  • Marking Knife IG-34360

    When marking accuracy is paramount, this marking knife will cut a line about 1/10th as wide as a sharp pencil line for greater accuracy. The blade is 38mm long with a comfortable handle that is 125mm long. It is flat on one side and beveled on the other, allowing you to draw the flat side across the reference piece to perfectly mark the edge. It is 100% reversible so is ideal for left or right-handed users. 

    » View More

    $14.90 (inc GST)
     
  • Marking Knife Pin Awl Type PA-001

     

    $29.90 (inc GST)
     
  • Marking Knives

    From $15.90 (inc GST)
     
  • Measuring Tape - Auto-Lock FC-80507

    $18.90 (inc GST)
     
  • Measuring Tape - Flatback FC-99944

    $14.90 (inc GST)
     
  • Measuring Tape - Reversible FC-99953

    $14.90 (inc GST)
     
  • Measuring Tape SpeedClip FC-98035

    Never have torn pants from your tape measure again. With the SpeedClip, securing your tape measure is a breeze. It easily clips over your pants or belt, plus it even holds your pencil and has a built-in sharpener. 

    » View More

    $3.00 (inc GST)
     
  • Mechanical Marking Pencil

    From $2.00 (inc GST)
     
  • Miniature Marking Gauge 138-MW

    $24.90 (inc GST)
     
  • Miniature Mortice Gauge 152-MW

    Great Xmas Gift! $31.90 (inc GST)
    RRP: $39.90
     
  • Miniature Try Square 133-MW

    $37.90 (inc GST)
     
  • Mortice Gauge Wheel 150mm 6in Long LMG-002

    $95.00 (inc GST)
    Out of Stock
     
  • OriginCal Vernier Calipers

    From $89.00 (inc GST)
     
  • Point 2 Point Mk 2 Marker MP-20045

    $49.90 (inc GST)
     
  • Rule Stop Suits 300mm Flat Rule IG-34-ST-12

    $8.90 (inc GST)
     
  • Scratch Awl 114-RW

    $29.90 (inc GST)
     
  • Self-Adhesive Measuring Tape

    When making accurate workshop jigs or fences, a self-adhesive rule is essential. This one is 18mm wide so it can easily be adhered to standard 19mm thick timber with clear, quality metric and imperial graduations. Nice and long for almost every application at 1400mm.

    » View More

    From $6.90 (inc GST)
     
  • Spring Dividers BSD-200

    $24.90 (inc GST)
     
  • Spring Outside Calipers BOC-200

    $24.90 (inc GST)
     
  • Stainless 300mm Rule IG-34012-N

    $3.50 (inc GST)
     
  • Stainless Small Protractor PRO-1195

    A small, simple protractor for occasional layout work at various angles. Produced from stainless steel with acid-etched graduations, it is simple and easy to use but can be difficult to set accurately. Perfect for transferring angles. Overall length is 195mm.

    » View More

    $11.90 (inc GST)
     
  • Striking Knife N-822302

    $39.90 (inc GST)
     
  • Taper Gauge 05-N-3803

    $65.00 (inc GST)
     
  • Traditional Beech Marking Gauge

    A great economical option for simple marking work. The 136-W Gauge has a single steel pin for marking along the grain and the faces are reinforced with brass strips to minimize wear and movement of the timber over time. Perfect for schools.

    » View More

    From $21.90 (inc GST)
     
  • Traditional Beech Try Square C-121

    $24.90 (inc GST)
     
  • Traditional Rosewood Cutting Gauge 143-W

    Great Xmas Gift! $47.90 (inc GST)
    RRP: $59.90
     
  • Traditional Rosewood Marking Gauge 138-W

    Great Xmas Gift! $43.90 (inc GST)
    RRP: $54.90
     
  • Traditional Rosewood Mortice Gauge 153-W

    Great Xmas Gift! $54.90 (inc GST)
    RRP: $69.90
     
  • Traditional Rosewood Try Square C-131

    $49.90 (inc GST)
    Out of Stock
     
  • Trammel Set with Rule 36in Long TRS-0236

    $39.90 (inc GST)
    Out of Stock
     
  • Trim45 Carpenter's Aid MC-8401

    The Trim45™ is the handiest tool in the toolbox when it comes to installing door and window casement trim as well as trim on fireplaces or book shelves. This unique device eliminates fumbling with tape measures when determining the length of finish trim. Unique to the Trim45™ is an adjustable reveal setting ranging from 1/8in to 1/2in in 1/8in increments allowing it to be used on any project.

    Stick pins, tape measure slots, and rare earth magnets make accurate installation of even the largest windows a one person job. Other uses include a built in mitre gauge for marking 45 degree angles, a built in square for marking 90 degree angles or setting mitre blades, and tape measure slots allow marking straight lines at the depth of the set reveal.

    » View More

    $19.90 (inc GST)
     
  • Wheel Marking Gauge

    From $49.00 (inc GST)
    Out of Stock
     
  • Wheel Marking/Mortice Gauge IG-34708

    $44.90 (inc GST)
     
  • Wheel Mortice Head Gauge

    From $95.00 (inc GST)
     
Results 1 - 88 of 88 Show: Sort By: