Buy Sandpaper & Coated Abrasives

Selecting the appropriate grit sandpaper for your finishing project involves understanding the stages of sanding: starting coarse for material removal and progressing to fine for smooth finishes. For rough surfaces or removing old finishes, begin with a grit between 60 and 80. As you prepare the wood for finishing, transition through medium grits (100-150) to eliminate any scratches or imperfections. Before applying the finish, the final sanding should use fine grits, such as 220 to 320, ensuring a perfectly smooth surface. Test the sanded area by running your hand across it; it should feel smooth without any noticeable blemishes or roughness.

Knowing when you've sanded enough comes from observing the uniformity and feel of the surface. The project piece should have a consistent appearance, with no visible marks, scratches, or unevenness. The surface should feel smooth to the touch, without any gritty texture. Using a light source at an angle can help reveal imperfections missed at a glance. Achieving a uniform, smooth surface indicates you've sanded sufficiently.

The frequency of changing sandpaper depends on the material you're sanding and the paper's quality. Hardwoods and painted surfaces tend to wear down sandpaper more quickly than softwoods. A decrease in sanding efficiency or visible clogging of the sandpaper are clear indicators it's time for a change. High-quality sandpaper with anti-clog coatings will last longer, but it's essential to assess the paper's condition continuously and replace it as soon as it stops performing effectively to ensure the best results and minimise effort.

Preventing clogging in sandpaper involves selecting the right grit for the material and ensuring the sandpaper has an anti-clog coating. Regularly remove the build-up of dust and debris during sanding by tapping the sandpaper against a hard surface or using a rubber cleaning stick designed for this purpose. If clogging occurs, gently brushing the surface with a wire brush or cleaning block can dislodge embedded particles. Keeping the sandpaper clean enhances its lifespan and effectiveness.

Modern sandpaper is not made from sand but rather from engineered abrasives like aluminium oxide, silicon carbide, or ceramic grains, which are bonded to a paper, cloth, or film backing. These materials are chosen for their durability and cutting efficiency. The term "sandpaper" persists from early versions of the abrasive, which used natural materials like crushed shell, glass, and sand.

Removing stains and paint from wood effectively requires starting with medium grit sandpaper, around 80 to 100, to strip off the top layers without damaging the wood underneath. After the majority of the stain or paint is removed, switch to a finer grit, such as 150-220, to smooth the surface and prepare it for a new finish. The specific grits might need adjustment based on the paint or stain's thickness and the wood's hardness.

For woodwork, sandpaper grit can range from very coarse (as low as 40 grit) for rapid material removal and surface levelling to very fine (up to 600 grit or more) for achieving ultra-smooth finishes and preparing surfaces for staining or sealing. The choice of grit depends on the project's requirements and the desired finish quality.

For the final sanding step, use a fine grit sandpaper, typically between 220 and 320, before applying a finish to your project. This ensures the wood surface is smooth and ready to accept the finish, contributing to a high-quality final appearance. However, avoid sanding with too fine a grit, as it may polish the wood, making it less receptive to stains and finishes. Aim for a balance that smooths the wood while maintaining its ability to absorb the finishing product effectively.

Steel wool can be considered finer than coarse sandpaper, especially at higher grades. Steel wool's finest grades, such as #0000, are used for ultra-smooth finishes, equivalent to 400 grit sandpaper or above. It's particularly useful for applying finishes or final surface preparation after sanding with sandpaper. Each grade of steel wool serves a specific purpose, from removing paint (coarser grades) to polishing (finer grades).

We offer a selection of sanding blocks and attachment tools designed to secure your sandpaper efficiently. These accessories help you sand smoothly and evenly, make it more comfortable to hold and use, and help you sand accurately in different projects. Whether you're hand-sanding a piece of furniture or preparing a surface for finishing, our sanding blocks and tools provide the support you need to achieve a flawless finish.

You'll know it's time to replace your sandpaper when it shows signs of wear, such as diminished effectiveness, visible smoothness where the abrasive surface used to be, or when it takes more effort to remove material. If the sandpaper begins to tear or if the backing starts to degrade, it's also a clear indication that a replacement is necessary. Keeping your sandpaper in good condition ensures efficient and high-quality sanding results.

When sanding, it's essential to prioritise your safety by wearing safety goggles and a dust mask to protect yourself from airborne dust and debris. This simple precaution helps prevent irritation or injury that could occur from particles. Keeping a clean workspace is also important, as it minimises dust buildup and associated risks and hazards.