Results 1 - 96 of 150 Show: Sort By:
  • 100mm Scroll Chuck

    From $199.00 (inc GST)
     
  • 100mm Scroll Chuck Cole Jaws TSCFJ-100

    $64.90 (inc GST)
     
  • 100mm Scroll Chuck Large Jaws TSCLJ-100

    $49.90 (inc GST)
     
  • 100mm Scroll Chuck Pin Jaws TSCPJ-100

    $44.90 (inc GST)
     
  • 100mm Scroll Chuck SuperGrip Jaws

    From $47.90 (inc GST)
     
  • 12in Dovetail Jig DJ-12

    Dovetail joints are as traditional to woodworking as you can get. Years ago, cabinetmakers would saw these by hand and clean them with a chisel but with modern technology comes a much quicker and easier way to create dovetails.

    While dovetails are quite specialized and only generally used for ornamental purposes these days, you can create simple but stunning boxes of many shapes and sizes using the Baladonia Dovetail System.

    Being a Baladonia Tool, the dovetail system is quick and easy to setup and you’ll be finishing your first dovetails in less than half an hour!

    The Baladonia system comes standard with a 1/2in half-blind template for the most simple of joints that can also be used for assembling drawers. Also available are a range of templates that are more attractive, interesting and unique for that extra wow factor.

    » View More

    $139.90 (inc GST)
     
  • 12in Dovetail Jig Box Joint Templates

    Box joint templates are a clean, simple and popular decorative method of jointing. The fingers are visible from both sides of the timber and provide a simple, elegant joint appearance. 

    Because the fingers aren't tapered, its recommended to clamp the work piece together once the glue is applied and the timber is assembled.

    The box joint templates come in three popular sizes - 1/4in, 3/8in and 1/2in width combs. The combs can be used up to the maximum clamping thickness of the jig - approximately 35mm.

    » View More

    From $39.90 (inc GST)
     
  • 12in Dovetail Jig Half-Blind Templates

    The Baladonia Dovetail System comes standard with the 1/2in half-blind template so if you damage it and it needs replacing you can buy this separately.

    Another other option is the small 5/16in comb to be used on small, fine decorative work. The template is suitable for use up to 12mm timber in conjunction with the DT079Q router bit, available separately.  

    » View More

    From $39.90 (inc GST)
     
  • 12in Dovetail Jig Sliding Joint Template DJ-12-TD-012

    $49.90 (inc GST)
     
  • 12in Dovetail Jig Through Dovetail Template DJ-12-TC-012

    Through dovetails are visible from both sides of the workpiece and are an ideal choice when visible craftsmanship is the preferred option - such as on jewellery and other decorative boxes. This template will machine most common timber thicknesses ranging from 9 - 19mm.

    Because of the complexity of the joint, the work pieces need to be cut separately with two different machining processes for the second work piece.

    » View More

    $69.90 (inc GST)
     
  • 13mm Keyed Drill Chuck DCA-132

    $49.90 (inc GST)
     
  • 15 Piece Metric Forstner Bit Set FSB-15

    $109.00 (inc GST)
    Out of Stock
     
  • 16 Piece Imperial Forstner Bit Set FSB-16

    $125.00 (inc GST)
     
  • 16mm Keyless Drill Chuck DCAK-162

    $69.90 (inc GST)
     
  • 16mm Spur Centres

    From $14.90 (inc GST)
     
  • 24 Piece Metric Forstner Bit Set FSBQ-24

    $299.00 (inc GST)
     
  • 25mm Spur Centre TSC-0225

    $19.90 (inc GST)
     
  • 8 Piece Brad Point Drill Set BPDS-8

    $19.90 (inc GST)
     
  • 85mm Steel Face Plate FP-85-SC

    $27.90 (inc GST)
     
  • Alloy Honing Guide MJ-817

    A simple universal design that has been around for years and still “does the job”. This one is manufactured in Taiwan so has clean, accurate castings and is well assembled. Will clamps any blades 3.2 – 76.1mm wide and runs on a a simple alloy wheel on the stone. Great value-for-money.

    » View More

    $14.90 (inc GST)
     
  • Alloy Surface Dogs WSD-02

    $17.90 (inc GST)
     
  • Aluminium 968mm Straight Edge ASE-968

    $49.90 (inc GST)
     
  • Aluminium Edge T-Track TTE-4914

    $29.90 (inc GST)
     
  • Aluminium Fence T-Track TTF-3610

    $39.90 (inc GST)
     
  • Aluminium Fence T-Track Flip Stop TTSTOP-6

    $19.90 (inc GST)
     
  • Aluminium Fence T-Track Mount Bracket TTSTOP-5

    $11.90 (inc GST)
     
  • Aluminium Mitre Tracks & Bars

    <p>If you want to make your own table-top and need a 3/4in mitre track, you can buy the aluminium extrusion separately with a silver anodized finish in 1220mm lengths.</p> <p>Also available is 457mm (18in) long silver anodized mitre slider for making your own jigs to suit all standard 3/4in mitre slots, including most cast-iron table saws.</p> » View More

    From $31.90 (inc GST)
     
  • Aluminium T-Track

    Rout 19mm wide x 9.5mm deep channels or rebates to install the T-Track. Designed to work with 5/16in size thread hardware, the track comes undrilled so you can choose where you want your own mounting holes (use 3/16in twist drill bit to create screw holes quickly and easily). Ribbed on the outside to grip the walls of the timber around it and anodized silver for long life.

    As shown in an enlarged image, it has been designed so when using the included screws, the screw head clears the t-track bolt or nut running above it so countersinking the screw head is not required.

    All track comes standard with four mounting screws, please let us know when ordering if you need any more.

    » View More

    From $11.50 (inc GST)
     
  • Aluminium T-Track Intersection Kit TTINT-1

    When you need to have two tracks intersect continuously, these kits are perfect to match with the standard long t-track. Comes with all necessary mounting hardware.

    » View More

    $19.90 (inc GST)
     
  • Aluminium T-Track With Scale

    From $15.00 (inc GST)
     
  • Automatic Centre Punch MJ-845

    The 98mm long knurled brass handle fits comfortably in the hand and 25mm long hardened steel point makes marking centre points quick and easy. The point will press easily into softwoods but by pushing down on the handle the snap spring will mark a deep point in the hardest materials quickly and accurately. Sharpen the point to use as a scratch awl as well.

    » View More

    $8.90 (inc GST)
     
  • Band Clamp - Steel

    From $49.90 (inc GST)
     
  • Bandsaw Blade Deluxe Guide Set BR-06

    This blade guide set will dramatically improve the performance of your universal bandsaw. Designed to fit onto a 22mm blade guide post, it should adapt to fit most universal bandsaws on the market today. It has an all-bearing construction with micro adjustments on all three bearings (of each guide) so that finite adjustment can achieve the perfect set-up for each blade thickness. Comes as a top and bottom blade guide set.

    » View More

    $119.00 (inc GST)
     
  • Bandsaw Rip Fence Attachment RF-5

    $129.00 (inc GST)
     
  • Basic Picture Framing Kit PFK-100

    $85.00 (inc GST)
     
  • Bench Grinder Toolrest Turning Tool Jig CJ-05-WT

    $19.90 (inc GST)
     
  • Bench Grinder Universal Toolrest Kit CJ-05

    This accessory suits 6in and 8in bench grinders and is capable of a wide range of angles, making it versatile for sharpening virtually all woodworking tools.

    ·      Large 152 x 85mm working surface

    ·      Maximum height of table when positioned flat is 150mm

    ·      Includes mitre guide to use as a guide when sharpening square edges blades

    ·      Spring loaded clamping handles lock the table in place securely and stay out of the way

    ·      Creates a hollow ground bevel which, when honed, creates a razor sharp edge

    PLEASE NOTE – new tool rest will be available in black when back in stock in mid-July.

    » View More

    $49.90 (inc GST)
     
  • Bench Grinder Wheel Dressing Stick - Diamond DTBAR-1

    $19.90 (inc GST)
     
  • Bench Stone Holder BSH-100

    Stop your water stone sliding all over the bench. Made in Japan of quality stainless steel and non-slip rubber so that it can be used to suspend in your water bath when not in use, this will hold stones of any width and thickness and a length of 180-230mm.

    » View More

    $34.90 (inc GST)
     
  • Biscuit Joiners

    Biscuit joining is a simple, quick and effective method of locating two work pieces for jointing timber that was developed by Lamello in Switzerland. You simply put the work pieces together, mark a common point on both and use that as a reference to cut a 4mm slot approximately halfway down the side of the timber, most commonly using either a router bit slot cutter or a dedicated biscuit joining machine.

    Squirt glue into the slots on both work pieces, pop a biscuit in and run glue along the remainder of the edge of the joint then clamp it together. The biscuit absorbs the glue, swelling and locking the work pieces in together tight. For thicker materials, you can use two biscuits  in the same location at differing heights increasing the joint strength even more.

    It is a very simple, quick and effective method of assembly that is used commonly in the joinery industry.

    Biscuits are available in three common sizes to suit different size work pieces with the most common size being the largest – the #20 biscuit.

    - #0 biscuit - 47 x 15mm
    - #10 biscuit - 53 x 19mm
    - #20 biscuit - 56 x 23mm

    » View More

    From $8.90 (inc GST)
     
  • Blonde Dewaxed Shellac Flakes

    From $32.90 (inc GST)
     
  • Bowl Turner's Toolrest Kit TRKBT-1

    $79.90 (inc GST)
     
  • Brad Point Drill Bits - Imperial

    From $3.50 (inc GST)
     
  • Brad Point Drill Bits - Metric

    From $3.50 (inc GST)
     
  • Centre Finder MJ-831

    A simple and very effective device to find the centre of round stock. Simply place the centre of the finder on the work piece, mark once then move to another edge and mark again. The crosshair formed by this should be very close to the centre of your work.

    » View More

    $6.90 (inc GST)
     
  • Circle Marking Trammel Heads TRS-01

    Get your own timber bar (minimum recommended thickness 17mm, maximum height 54mm) and attach the trammel heads to quickly mark out circles. One head can accept a pencil or pinhead for depending on your preference. Well-made from 4.0mm steel plate.

    » View More

    $24.90 (inc GST)
     
  • Coping Sled T-Track Hardware Kit CSTTK-1

    $64.90 (inc GST)
     
  • Countersink Set CS-7

    $39.90 (inc GST)
     
  • Cross Slide Vice CSV-4

    $99.00 (inc GST)
     
  • Crown Revolving Live Centre TLRC-0219

    $49.90 (inc GST)
     
  • Crown Spur Drive Centres

    From $34.90 (inc GST)
     
  • Deluxe Honing Guide MJ-847

    This guide will clamp blades and chisels anywhere from 0 – 63mm by sandwiching the blade between the base and clamp. The brass nuts and nylon washers make it easy to have good clamping pressure without over-tightening and damaging your tool or the guide.

    The 40mm-wide brass roller provides stability when rolling on the stone. This can be removed to expose a ledge that can then be run against your bench grinder tool rest to use as a straight grinding jig. 

    » View More

    $24.90 (inc GST)
     
  • Deluxe Roller Support Stand S-5008

    $95.00 (inc GST)
     
  • Drawer Pull Handle Drilling Jig DPJ-01

    $16.90 (inc GST)
     
  • Drill Press Table T-Track Hardware Kit DPTTK-1

    $135.00 (inc GST)
     
  • Economy Tungsten Carving Disc D-100

    With tungsten carbide flakes, this disc is less aggressive than other discs. Suits most 4in grinders. Arbor size 22mm with bush supplied down to 16mm for standard 4in angle grinders.

    $19.00 (inc GST)
     
  • End Check Liquid Wax

    From $14.90 (inc GST)
     
  • Forstner & Sawtooth Bits - Metric

    From $7.50 (inc GST)
     
  • Forstner Bit Extension EXTN-1

    $24.90 (inc GST)
     
  • Front Vice Screws

    From $49.90 (inc GST)
     
  • Full Woodturners Jacket

    From $49.90 (inc GST)
     
  • Glue Syringe & Needle Set

    From $4.90 (inc GST)
    Out of Stock
     
  • Graduated Try Square SQ-01250

    Produced to the US Standard (0.02mm tolerance), this square is perfect for general-purpose work. Stainless acid-etched graduated blade – metric one side, imperial the other – with a massive hardened chrome finish 17.5mm thick steel base.  While we like using the engineer’s square for setting up machines etc. we’ve found this is THE go-to square for general layout work.

    » View More

    $32.90 (inc GST)
     
  • Half-Face Powered Dust Mask Kit

    Unlike other powered respirators, this respirator does not cover the whole head - something users of full-face masks complain of. It has a simple power pack which attaches to the waist and feeds the power up to the respirator itself. Inside the respirator is a small motor that runs a fan that circulates air around the mask. The mask itself is made of a soft malleable plastic and is comfortable to wear for extended periods of time with two generous headstraps to hold it in place.

    » View More

    From $129.00 (inc GST)
     
  • Hand Mitre Saw - Compound

    From $109.00 (inc GST)
     
  • Hand Mitre Saw - Large

    From $79.00 (inc GST)
     
  • Hand Mitre Saw - Small

    From $69.00 (inc GST)
     
  • Hand Mitre Trimmer

    From $379.00 (inc GST)
     
  • Hand Mitre Trimmer Top Trim Attachment FTA-02

    $49.90 (inc GST)
     
  • Hand Sanding Block - Medium UH-632-E

    $10.90 (inc GST)
    Out of Stock
     
  • Hand Sanding Block - Small UH-432

    $9.90 (inc GST)
     
  • Heavy-Duty Mitre Clamp

    From $39.90 (inc GST)
     
  • Live Cup Boring Centre TLBC-0235

    $49.90 (inc GST)
     
  • Live Cup Centres

    From $19.90 (inc GST)
     
  • Lubricant/Rust Inhibitor Camellia Oil CO-240

    Japanese craftsmen have used this oil for generations as an effective rust inhibitor. It can also be used a liquid lubricant when sharpening if water is not suitable. 

    » View More

    $30.00 (inc GST)
     
  • Magnetic Worklight L-40

    A fantastic accessory for your just about every machine in your workshop. It attaches to your steel machines via its strong, magnetic base. It also has screw holes in the base for dual mounting on a bench top or wall. Featuring a ceramic E27 (screw-in) lampholder and a sturdy metal head. It can take standard incandescent lamps, but they do generate a lot of heat, which can make the metal head very hot to touch. We recommend the use of compact fluorescent lamp (CFL) globes for this reason and also more light generation. 

    • Rotary on/off switch
    • 370mm flexible arm
    • 70mm dia. magnet in the base
    • Easy to install
    • Easy to move
    • 2m power lead

    LIGHT BULB NOT INCLUDED

    $34.90 (inc GST)
     
  • Magnetic Base Flexible LED Worklight L-80

    •  Full worklight assembly and LED’s manufactured in Taiwan
    •  Strong magnetic base securely holds lamp on horizontal and vertical planes
    •  410mm-long arm to position anywhere over work piece
    •  Head designed to remain cool to accidental touches after operating for long periods
    •  Option of halogen 20W downlight globe for warm yellow light
    •  Or 4x 6W LED’s brightly illuminates work space with clear white light

    $149.00 (inc GST)
     
  • Magnetic Tool Holder MTH-24

    The magnetic tool holder is a great way of laying your hands on your favourite tools quickly and easily when working in one area. With two magnetic strips it will hold virtually anything securely in place – even standard size hand planes!

    Measuring 610 x 48mm, you can screw in place just about anywhere!

    $29.90 (inc GST)
     
  • Mat Cutter System

    From $34.90 (inc GST)
     
  • Mini Long Drum Sanding Set

    From $39.90 (inc GST)
     
  • Mitre Track Bolts MTB-57

    $3.50 (inc GST)
     
  • Mobile 230kg Machine Base MB-230

    $99.00 (inc GST)
     
  • Mobile 400kg Machine Base MB-400

    $139.00 (inc GST)
     
  • Mortice Chisel Bit Handle MCBHANDLE

    $15.90 (inc GST)
     
  • Mortice Chisels & Bits

    A range of mortice bits suitable for working on all types of timber. This range has been specifically chosen because of the quality of the chisels. 98% of all mortice bits are now manufactured in Asia and this manufacturer was chosen due to their outstanding quality. They supply many OE manufacturers of mortice machines that are world renowned. Collar size is 19mm. Maximum cutting depth recommended is 60mm. Now a five-piece set is available for a solid range of sizes.

    » View More

    From $16.90 (inc GST)
     
  • Mortice Kit MAS-1

    $99.00 (inc GST)
    Out of Stock
     
  • Non Slip Mat 1220x640mm RM-120640

    Everyone should always have a spare one of these mats! They are cheap and easy to throw around, wash, clean and use again.

    The synthetic rubber of the Baladonia non-slip mat is one of the stickiest around and can hold work pieces while being sanded, routed or just about anything!

    Also great for boots of cars to stop shopping sliding around, under furniture and just about anything else you can think of.

    $14.90 (inc GST)
     
  • Panel Clamp Kit

    From $49.90 (inc GST)
     
  • Pipe - Suits 3/4in Pipe Clamps

    3/4" pipe threaded one end.

    » View More

    From $18.50 (inc GST)
     
  • Pipe Clamp

    From $24.90 (inc GST)
     
  • Plastic Bench Dogs PBD-4-Q

    $9.90 (inc GST)
     
  • Plastic Profile Gauges

    Allows accurate outlining of various shapes and forms. Great for copying difficult moulding profiles or creating your own templates. 250mm in length

    » View More

    From $16.90 (inc GST)
     
  • Power Tool Guide Extension Kit

    If you need to go longer than 50in (1270mm), look no further than this cost-effective extension kit. Remove the included clamps on your guide rails and replace with the centre connector and two sliding toggle clamp heads in less than two minutes. Two 50in guides with the extension kit allows you to rip 2440mm-long boards.

    Also available separately is the connector if you want to join more than one rail so you can go longer than 2440mm-long boards.

     

    » View More

    From $89.90 (inc GST)
     
  • Power Tool Guide Position Stop PTGPS

     

    A simple way of stopping the cut in the same place on multiple boards.

    » View More

    $8.50 (inc GST)
     
  • Power Tool Guide Protractor Attachment PTGPF

    $44.90 (inc GST)
     
Results 1 - 96 of 150 Show: Sort By: