A Horizontal Toggle Clamp, Welding Clamp and Jig Clamp!
For repetitive clamping in both woodworking and metalworking applications, toggle clamps are the go-to accessory to hold work pieces in place when working on them. Available in a range of sizes and configurations to suit practically all situations. The larger the overall size of the clamp, the greater the clamping strength.
These toggle clamps are produced from a longtime, quality manufacturer and can be relied on in all situations, from the home workshop right through to heavy-duty, industrial applications in manufacturing.
Toggle Clamp: Horizontal Small
Please note that all clamping thicknesses can be increased by mounting a spacer under the clamp base or, in the case of the TCH-04 - by installing it on a taller mounting bar. All toggle clamps can be mounted in the 5/16in t-track by using either the standard 5/16in t-bolts and nuts or standard hex-head 1/4in bolts and matching nuts.
||Maximum Clamping Thickness
||Vertical Plane Fixing
* Shown with optional micro-adjustable large pads attached that are available separately as shown above. These clamps normally come with standard rubber pad as shown on other clamps.
** The reach of this clamp will be reduced by the thickness of the mounting bar that the arm must reach over. For instance 19mm thick mounting bar will reduce the reach from 98mm to 79mm.