The Torquata Power Tool Guide (PTG) Hardware Kit allows you build your own custom jigs and fixtures for your PTG Quick Clamp. Turning your guide into a versatile clamping and machining device. Useful for any woodworker either enthusiast or professional.
This Hardware Kit allows you to attach a range of jigs and fixtures to your PTG Quick Clamp via the twin T-slots running along its length. Use to build stop blocks, hold feather boards or whatever you need or can imagine. Included in the kit is 6 x T-bolts, 6 x Washers and 6 x Connectors.
- Included in the kit is 6 x T-bolts, 6 x Washers and 6 x Connectors
- Multiple applications
- Easy to install
How does it work?
The connectors slide into the T-slots of the PTG Quick Clamp. Tighten the screw and fix them in position. Attach jigs and fixtures as required.
Why do I need this?
Using the Hardware Kit increases the versatility and application of your PTG Quick Clamp. Complete a broad ensemble of jigs that increases productivity in your workshop.
A Complete System
The Torquata PTG Quick Clamp and its range of accessories are a complete system designed to enhance your woodworking. Review the whole range products available on the “A Complete System” tab.
100% made in Taiwan
Your Torquata PTG Quick Clamp and accessories are 100% made in Taiwan. Equipment built in Taiwan is of the highest standard and the go-to choice for premium woodworking brands around the world.
The Torquata Power Guide offers you as complete system. Check out this range of options for you to create the most versatile of workshop assistants.
Power Tool Guide (PTG) Quick Clamp - 24in PTG-24-T, 50in PTG-50-T
The PTG Quick clamp is the heart of this system. Available in two sizes, 24in (610mm) and 50in (1270mm). Choose your preferred option from the dropdown menu above.
Cut smooth, straight, clean lines with the PTG Traveller base plate fixed to your circular saw or router. The Traveller then attaches directly to your PTG Quick Clamp. You can leave the Traveller attached to your power tool for free hand cutting.
The 180mm long handle extender fits to the Quick Clamp fixing handle. This extension gives you better leverage to operate the clamp when more clamping pressure is required.
Turn your PTG Quick Clamp into a T-square. The 90 Degree head fixes around the Quick Clamp’s fixed clamp head. Attaching the 90 Degree head greatly reduces the time taken to set up a square crosscut and turns the guide clamp into a large square for marking out.
More clamping surface area means clamping stability and power. Great for wide or thick stock, reduces marring on soft materials. The wide jaws fit securely to the Quick Clamp head fixed by two wood screws that are included in the kit.
These adaptors join two PTG Quick Clamps back-to-back. This creates a holding device to grip panels of sheet material across the top of your bench. The lower clamp grips your bench, while the upper clamp holds the workpiece. Adaptors supplied as a pack of 8.
Attach any two PTG Quick Clamps to create your own wide body back-to-back clamp. Secure the bottom clamp to the bench, secure your piece with the top clamp and you are ready to work. Sanding, gluing and routing are made much easier.
Use this hardware kit to build your own custom jigs and fixtures for your PTG Quick Grip clamp. Designed primarily to work in the T-slot of the clamp.