Torquata Flush Trim Spiral Router Bits
Torquata solid carbide spiral bits begin life as extra-hard C4 micro grain carbide, ground using sophisticated 6-Axis C.N.C. to grind their spiral geometry. The precision of the spiral and hardness of carbide allows for a very sharp edge and typically longer edge sharpness. A straight bit can't compete with that. The geometry and top point allow you to plunge into your work like a drill, using a constant shearing action when making the cuts.
Used handheld, upcut bits eject the waste up towards the shank with a smoother edge on the bottom of the cut, while downcut ejects the waste down with a smoother top edge where plunged. Used in a table, upcut bits eject waste under the table with a smoother top edge, and downcut bits eject waste upward with a smoother bottom edge.
These spiral flush trim bits have a double-bearing top guide so they can be used as the cleanest, smoothest flush trim bits available. All are 1/2in shank bits.
Spiral bits work perfectly on all forms of solid timber, along, across and on end-grain and leave razor-sharp edges on melamine, veneered boards, ply, MDF and chipboard.
Specifications:
| Product Code |
Cut Profile |
Cutting Diameter
Metric |
Cutting Diameter
Imperial |
Cutting Height
Metric |
Cutting Height
Imperial |
Overall Length
Metric |
| SCD-127-LBH |
Downcut |
12.7 |
1/2in |
31.7 |
1 1/4in |
76.1 |
| SCD-127-XBH |
Downcut |
12.7 |
1/2in |
50.8 |
2in |
102.0 |
| SCU-127-LBH |
Upcut |
12.7 |
1/2in |
31.7 |
1/2in |
76.1 |
| SCU-127-XBH |
Upcut |
12.7 |
1/2in |
50.8 |
2in |
102.0 |