Oneida Dust Deputy 4/5in Cyclone Separator Deluxe Kit

  • Oneida Dust Deputy 4/5in Cyclone Separator Deluxe Kit AXD-152045

    The Dust Deputy turns your single-stage dust extractor into an efficient, effective two-stage extraction system, minimising suction loss, reducing filter changes and improving workshop air quality.

    Its cyclone technology works on a wide range of materials. Oneida’s 4/5 Dust Deputy range is ideal for the serious enthusiast and professional woodworker.

    Cyclone Technology

    The principle behind cyclone separation is straightforward. The air containing particles enters the cyclone chamber from the side which causes it to spin rapidly around inside the chamber. The dust particles are thrown against the inside wall of the chamber, where they drop out of the airflow and fall into the collection chamber beneath. A low pressure zone develops in the centre of the cyclone through which the clean air is able to exit. Cyclone separation typically removes 99% of particles, leaving the smallest 1% to be captured by filtration.

    Universal Compatibility

    Any dust extractor that is rated at 350cfm or greater can be used with the Dust Deputy. 

    Reduce filter changes

    There are no filters inside the Dust Deputy – the dust is removed solely through cyclonic action. Only 1% of the material makes it through the cyclone to be caught in your vacuum’s filter, massively reducing the number of times you need to clean it out.

    Reduce Suction Loss

    A filter caked with dust will increase resistance to the airflow and can significantly reduce suction. The Dust Deputy removes the dust before it even gets to the vacuum. When your filter is not getting blocked up, the vacuum will continue to run at full air velocity for much longer.

    Easy Emptying

    The Dust Deputy 4/5 Deluxe kit can be mounted to a wide range of strong collection containers, so emptying the dust is as easy as removing the container’s lid and dumping its contents.

    Cyclonic Separation Efficiency

    Removes over 99% of fine wood dusts

    Horsepower Rating

    0.5HP - 3HP

    Airflow Requirement

    Minimum 350 CFM

    Waste Capacity

    15 Gallons

    Inlet Size

    Without Adapters: 5” O.D., 4-3/4” I.D.

    With Adapters: 4" O.D., 3-3/4" I.D.

    Outlet Size

    Without Adapters: 6” O.D., 5-3/4” I.D.

    With Adapters: 4" O.D., 3-3/4" I.D.

    Discharge Size

    8-3/16" O.D.

    6" I.D.


    Primary Build Materials

    Static Dissipative Polyethylene, Fiberboard

    Static Resistance Rating

    Static Dissipative









    Height to Centre of Inlet


    Product Compatibility

    0.5HP to 3HP Single-Stage Dust Collectors (Minimum 350 Actual CFM)



    Cyclone, 2x 4" Adapters, Fiber Drum, Lid Clamp, Gasket, Hardware

    Country of Origin

    Made in USA

    $679.00 (inc GST)

Product Video