Ioroi Japanese Umeki Oire Nomi Chisels with Red Oak Handle

  • Ioroi Japanese Umeki Oire Nomi Chisels with Red Oak Handle

    Set the romance aside, Japanese chisels are made for working wood. The combination of their forge welded blade, hollow back, and ferrule / tang mounted hardwood handles makes a Japanese chisel a most effective and delightful chisel to use. Japanese chisels are a great option for anyone who loves using hand tools to work wood.

    Working with hand tools is one of the great pleasures of woodworking. And using Japanese tools takes this experience to the next level. If you are purchasing your first Japanese tools, a great place to start is with a chisel. Suitable for all types of detailed joinery tasks, check out these Umeki Oire Nomi Japanese chisels.

    Umeki Oire Nomi chisels are available in 8 widths, please select your preferred option from the dropdown menu

    With their forge welded blade, hollow back and socket ferrule / tang mounted hardwood handles, Japanese chisels are distinctly different in construction to Western chisels. This does not mean that are either superior or inferior, after all, they virtually do the same job. They are simply the Japanese approach, built upon hundreds of years of tool making tradition.

    Your Umeki Oire Nomi Chisel

    Umeki Oire Nomi chisels feature a Red Oak hardwood handle matched with a steel hoop. They are designed for striking with a metal hammer or wooden mallet. The chisel blade is thin and features a very wide chamfer on both upper edges that meet at the centreline of the blade. This makes the Umeki chisel light, easy to handle and very versatile. Japanese chisels are assembled using a combined socket ferrule and tang design making them very secure and long lasting. Umeki Oire Nomi chisels are used for a broad range of detailed tasks including dovetailing, cleaning up joinery and inlaying.

    Why a welded blade?

    Your Umeki Oire Nomi chisels blade features a layer of high carbon White Paper steel forged to a softer wrought iron back. This produces a chisel with an extremely hard cutting edge cushioned by the softer steel blade. This blade making technique has been developed by Japanese Master blacksmiths over hundreds of years. These chisels stay very sharp and are perfect for working difficult softwoods and abrasive hardwoods.

    What is White Paper Steel?

    Japanese tools are made from either White Paper steel (Shirogami) or Blue Paper steel (Aogami), the colours refer to the paper used to wrap the steel by the manufacturer. White Paper Steel is a hard, high carbon steel with few impurities. White paper steel contains less carbon than Blue Paper steel chisels so therefore tougher and less prone to chipping.

    Why a hollow back?

    The hollow back is to aid the process of sharpening. The hollow creates a very thin area behind the cutting edge, and it is only this narrow section that requires flattening. Due to the hardness of the steel, without the hollow back the chisel would simply take forever to flatten. With age it is possible that hollow can interfere with the cutting edge, no worries, they chisel can be reshaped by hand to extend its life indefinitely.

    Why a socket ferrule and tang?

    Western chisels are generally constructed in two ways - socket or tang. Socket chisels are where the handle fits into a socket forged as part of the blade. Tang chisels are where the blade tang is inserted into the handle supported by a steel ferrule.

    Modern Japanese chisels are a combination of socket and tang chisel designs. A heavy tang is inserted into the handle supported by socket shaped ferrule. This results in a very solid, long lasting and self-tightening chisel.

    Why a steel hoop?

    The steel hoop protects the top of the handle from the blows of steel hammers commonly used in Japanese woodworking. Traditionally, fitting the steel hoop was the responsibility of the purchaser. Modern Japanese chisels are generally supplied with the hoop fitted in position. The hoop and chisel handle may be adjusted as the chisel ages.

    Made in Japan

    These Japanese chisels are a high-quality product, made by Master Blacksmiths Ioroi in Japan.

    Wide chamfer design

    The Umeki chisel blade is thin and features a very wide chamfer on both upper edges that meet at the centreline of the blade. This makes the Umeki chisel light, easy to handle and very versatile. Their thin blade and low profile make them ideal for a broad range of detailed tasks, particularly when working in tight situations. Umeki chisels are perfect for dovetailing, cleaning up joinery and inlaying.

    Welded White Paper steel blade

    Your Umeki Oire Nomi chisel has an extremely hard White Paper steel cutting edge cushioned by a softer steel blade. This means your chisel will stay super sharp even with extended use. Japanese chisels are ideal for difficult soft woods and resist the natural abrasion often encountered with exotic hardwoods.

    The hollow back

    The back of your Japanese chisel is very hard. The hollow back means flattening your chisel when sharpening is far less time consuming. Spend more time woodworking and less time sharpening.

    Socket ferrule and tang assembly

    The socket ferrule and tang design make a Japanese chisel a very secure, stable and long-lasting chisel. Striking the chisel forces the handle ferrule deeper into the socket, tightening the sockets grip even further.

    The steel hoop

    The steel hoop protects the top of the handle from the blows of steel hammers commonly used in Japanese woodworking. The handle of your Umeki Oire Nomi chisel is protected even when using the heaviest or hardest of mallets.

    Hardwood handle

    The handle of your Umeki Oire Nomi is made from Japanese Red Oak. This material is hard and dense, perfect for making tool handles. The chisel handle also bulges in the middle, strengthening the chisel further and helping the chisel to fit comfortably in your hand.

    Stout robust design

    Japanese chisels tend to be shorter and squarer than Western chisels. Combined with the chisels steel hooped hardwood handle, you have a chisel that is made for work. Chop and chip away using a Japanese steel hammer or wooden mallet. Perfect for all types of joinery tasks.

    Packaging

    Your Umeki Oire Nomi chisel comes packed in a beautiful hard cardboard box - your chisel will arrive in perfect condition. Also means it is a thing of beauty, matched only by the pleasure you will find using it.

    A tool for life

    Your Umeki Oire Nomi chisel is a lifetime investment. These chisels are of high quality, built to last and a pleasure to use. In addition, Japanese chisels are designed so they may be maintained as they age and wear, they can even be modified. For example, the hollow back of the chisel may be modified to extend the chisels life indefinitely. The handles are made so the steel hoop can be repositioned as the end of the handle wears through heavy use. You can even make your own handles and fit them if you so desire. These are the tools of the true craftsperson.

    Made in Japan

    The chisel is a very old and fundamental tool. And the Japanese are Masters of their manufacture. Your Umeki Oire Nomi chisel promises you years of pleasurable use and will find a permanent home in your hand tool kit. Order yours today.

    A note on Japanese chisel design and assembly

    As outlined above, Japanese chisels are made in four parts. A blade with tang. A socket shaped ferrule. And a handle with a fitted steel hoop. The important point is that the socket ferrule and blade are separate steel elements. When you receive your chisel, the shank of the blade may appear as one single piece of steel wherein fact it is two pieces of separate steel. Occasionally, a small hairline join may appear around the shank of the chisel approximately 20mm from the base of the wooden handle. This is the join between the socket ferrule and the chisel blade. This hairline join is completely normal and is in no way a defect.

    Brand

    Ioroi

    Country of origin

    Japan

    Warranty

    2 years limited

    Material

    White Paper steel

    Bevel angle

    35 degrees

    Handle material

    Japanese Red Oak

    Steel hoop diameter

    25mm

    Handle length

    100mm

    Blade length – including socket ferrule

    130mm

    Overall length

    230mm

     

    Please note: The blade length specifications for these chisels are approximations. Japanese chisel blades may differ in length by plus or minus 5mm.

    3mm
    J-003-UON
    $85.00 (inc GST)
    6mm
    J-006-UON
    $85.00 (inc GST)
    9mm
    J-009-UON
    $85.00 (inc GST)
    12mm
    J-012-UON
    $89.00 (inc GST)
    15mm
    J-015-UON
    $89.00 (inc GST)
    18mm
    J-018-UON
    $95.00 (inc GST)
    21mm
    J-021-UON
    $99.00 (inc GST)
    24mm
    J-024-UON
    $99.00 (inc GST)
     

Product Video