FastCap 2P-10 Starter Kit & Case
The perfect entry point into the 2P-10 system. This handy kit gives you a full range of what is on offer from FastCap and allows you to find out what you use the most and therefore what extra accessories and adhesives you may want to get.
The 2P-10 Kit gives you every type of 2P-10 in 63ml (2.25oz) bottles. It also includes Activator and Debonder. Everything comes in a convenient case with application instructions.
Colour of the case may differ from picture.
What is the 2P-10 system?
2P-10 is a two-part ten-second adhesive. Just apply the adhesive, then spray the activator and stick it together for a strong, permanent bond. However this is more than just a 2 part adhesive. Fastcap have gone a step further to design a full range of adhesives, applicators and colourants to meet all your rapid adhesive needs. So much more than other CA glues that think they're super.
2P-10 can be used on any material as long as it is clean and the surface is well prepared. The surface should be clean, with no oil, and slightly etched so the glue can bite more effectively. It should not be used in lieu of a weld (on metal), but it is very effective for tacking, to hold a piece in place.
For more information on this product click here.
For the MSDS click here.
||Starter Kit and Case
- 63ml (2.25oz) Thin Glue
- 63ml (2.25oz) Med Glue
- 63ml (2.25oz) Thick Glue
- 63ml (2.25oz) Jel Glue
- 57ml (2oz) Activator
- 57ml (2oz) Debonder
- 5x Microtips
- 1x Pump Spray Top
- 2x Brushes
The glue has a shelf life of 2 years from the manufactured date, regardless of whether it has been opened or not. Every bottle has an expiration date printed on the side in a 6 digit format (MMDDYY).