FastCap 2P-10 Glue Colorant Single Colour
Designed by FastCap with the professional woodworker in mind. The 2P10 Color Kit is an all-in-one adhesive colorant system that will help you tint the glue to match the repair surface. For use with 2P10 Jel and the excess can be sanded off when it dries. This is yet another innovative member of the FastCap 2P10 family.
To use this, simply Mmx exactly the right tint of 2P-10 filler to match your project using a combination of the tints. This high tech colorant is specifically made to work with 2P-10 adhesive. Simply mix the dry colorant to get the shade you want on the mixing pad, then add a small amount of 2P-10 Jel. Mix, apply, spray with activator, and sand.
Please Note: This is for a single colour. Please choose your desired colour from the drop down menu.
What is the 2P-10 system?
2P-10 is a two-part ten-second adhesive. Just apply the adhesive, then spray the activator and stick it together for a strong, permanent bond. However this is more than just a 2 part adhesive. FastCap have gone a step further to design a full range of adhesives, applicators and colourants to meet all your rapid adhesive needs. So much more than other CA glues that think they're super.
2P-10 can be used on any material as long as it is clean and the surface is well prepared. The surface should be clean, with no oil, and slightly etched so the glue can bite more effectively. It should not be used in lieu of a weld (on metal), but it is very effective for tacking, to hold a piece in place.
For more information on this product click here.
For the MSDS click here.