Torquata Double Clutched Pipe Clamp - Pipe included

  • Torquata Double Clutched Pipe Clamp - Pipe included

    Double Clutched Pipe Clamp with Pipe Included.

    Anyone who has worked with pipe clamps knows the annoyance of having to shift them around under your piece because the bottom non-moving jaw of the clamp is not quite butted up against your work piece. With Torquata's double clutched pipe clamps, this is a thing of the past. Just lay your work down in the middle of the open clamp and slide the jaws in from both ends. No more lining them up on the table, no more lifting you work to slide a clamp around. 

    This also eliminates the need for threaded pipe. So you can buy long pipe lengths and cut them to the size you need.

    These are quite possibly the easiest clamps on the market. You will seriously wonder the same thing we did; "why has this not been the standard for pipe clamps forever?"

    Manual Handling Surcharge (Overlength Item)

    Any item that measures over 1.2m once packaged cannot be sent through automatic freight sortation machines and must be handled manually. There is a surcharge of $12.00 charged by the freight company to manually handle this freight. Timbecon passes this charge on at cost.

    Clamp with 900mm Pipe
    $65.00 (inc GST)
    Clamp with 1200mm Pipe (Manual Handling Surcharge Applies)
    $69.00 (inc GST)
    Clamp with 1500mm Pipe (Manual Handling Surcharge Applies)
    $69.90 (inc GST)
    Clamp with 1800mm Pipe (Manual Handling Surcharge Applies)
    $72.90 (inc GST)
    Clamp with 2100mm Pipe (Manual Handling Surcharge Applies)
    $75.00 (inc GST)

Product Video