Sherwood Triton Pre-Drilled Router Mounting Plate

  • Sherwood Triton Pre-Drilled Router Mounting Plate RTAMP-5

    Sherwood Router Mounting Plates Pre-Drilled for the Triton Router

    The router has been discontinued by current distributor and will be made available once it comes back to Australia - so at this stage the only item we are able to supply is the pre-drilled mounting plate.

    The Triton TRA-001 Router is easily the most innovative plunge router released in the past twenty years. One of the many great features of it is the above table height winding mechanism built in which allows for above table bit changes. The beauty of the system is at full extension above the table there's a spindle lock so it has the added benefit of single spanner changes too!

    The Sherwood Aluminium Mounting Plate is now available pre-drilled to quickly and easily remove the black plastic base plate and attach the mount plate to the router. Along with that, the hole for the height winding arm for the Triton is also pre-drilled and marked with the direction to wind it up or down.

    If you already have the router then you can buy the plate on its own or bundle it with a brand-new Triton Router save!

    About Sherwood Aluminium Mount Plates

    The Sherwood aluminium router mounting plate is precision-milled and CNC-machined from 6mm-thick aluminium plate. The aluminium is anodized in Sherwood orange and then checked for flatness after this important step. Where necessary, each plate is checked and adjusted for flatness for a perfect smooth surface closest to the bit - where it matters most.

    Router Mount Plate Aluminium 298 x 235mm Pre-Drilled Triton

    Also included is a template to perfectly centre your router over the centre of the bit aperture.

    There are six grub screws installed along the edges of the mount plate to ensure a perfectly level fit on the lip of the router table underneath it. The radius on the corner of the mounting plate is 16mm.

    Which Size?

    The new Sherwood Router Table range has moved to the North American industry-standard size 298 x 235mm. This plate can also be used in other brands of tables such as Kreg, Incra, JessEm etc.

    The centre hole is 92.2mm diameter and includes one phenolic twist-lock insert ring that has a 38.1mm aperture. The insert ring spanner comes standard with the mount plate as well as a starter pin and two holes to mount it either to the left or the right of the bit. 

    $129.00 (inc GST)
    Order Now For Shipment or Pick Up 8th October

Product Video