March Sale

All items below are on special through to 31st March or until stocks last!

Results 1 - 96 of 194 Show: Sort By:
  • On Sale

    Stair tread bits are designed to remove large amounts of material in either planing, grooving or rebating operations with cutting blades running along the entire top edge of the bit and large cutaways for chip ejection.

    » View More

    From $24.90 March Sale! (inc GST)
    RRP: $31.00
     
  • On Sale
    From $30.00 March Sale! (inc GST)
    RRP: $36.00
     
  • On Sale
    From $23.90 March Sale! (inc GST)
    RRP: $28.00
     
  • On Sale
    From $23.90 March Sale! (inc GST)
    RRP: $28.00
     
  • On Sale
    March Sale! $16.90 (inc GST)
    RRP: $24.90
     
  • On Sale
    From $999.00 (inc GST)
     
  • On Sale
    From $599.00 (inc GST)
     
  • On Sale

    Ezelap diamond plates have been manufactured in the US since the 1970s and use a unique process and modern technology to produce the highest quality diamond plates. The continuous diamond plates cut the fastest and most efficiently, with the best edge produced of any diamond plate worldwide.

    The high-quality industrial-grade diamonds are bonded on to a 1/4in thick steel plate substrate to ensure perfect flatness and long-life durability. Once coated the plates are approximately 6.5mm thick.

    Unlike cheap Asian diamond plates, as the diamond surface wears down, more and more diamonds are exposed and the sharpener cuts faster. When more pressure the plate will cut even faster.

    With care these sharpeners can last a lifetime. 

    Also available in 200x75mm size.

    » View More

    From $53.90 March Sale! (inc GST)
    RRP: $59.90
     
  • On Sale

    Most woodworkers need two grits to sharpen their tools – a medium or fine grit to touch up edges and super-fine to finsh off. These double-sided plates offer great value-for-money as you can get both in one compact package.

    Each sharpener is approximately 2.7mm thick and uses the same high-quality industrial diamonds as all Ezelap products and the two plates are set into a durable plastic cradle that maintains long-term durability and plate flatness.

    Plate size is 150x50mm with a number of grit combinations available.

    Also available in 200x75mm size.

    » View More

    From $89.00 March Sale! (inc GST)
    RRP: $99.00
     
  • On Sale

    A shorter version of the digital protractor (overall length 180mm), the addition of the 280mm long chrome-finished aluminium alloy fence turns the protractor into a digital sliding bevel. Because of the additional base, you will find it much easier to use due to the increased stability of the fence. Our pick for accurate angle measurements.

    » View More

    March Sale! $37.90 (inc GST)
    RRP: $44.90
     
  • On Sale
    From $1,879.00 (inc GST)
    RRP: $1,999.00
     
  • On Sale
    From March Sale! $12.90 (inc GST)
    RRP: $17.90
     
  • On Sale
    From $34.90 March Sale! (inc GST)
    RRP: $49.90
     
  • On Sale

    Ezelap diamond plates have been manufactured in the US since the 1970s and use a unique process and modern technology to produce the highest quality diamond plates. The continuous diamond plates cut the fastest and most efficiently, with the best edge produced of any diamond plate worldwide.

    The high-quality industrial-grade diamonds are bonded on to a 1/4in thick steel plate substrate to ensure perfect flatness and long-life durability. Once coated the plates are approximately 6.5mm thick.

    Unlike cheap Asian diamond plates, as the diamond surface wears down, more and more diamonds are exposed and the sharpener cuts faster. When more pressure the plate will cut even faster.

    With care these sharpeners can last a lifetime. 

    » View More

    From $99.00 March Sale! (inc GST)
    RRP: $115.00
     
  • On Sale

    Most woodworkers need two grits to sharpen their tools – a medium or fine grit to touch up edges and super-fine to finsh off. These double-sided plates offer great value-for-money as you can get both in one compact package.

    Each sharpener is approximately 2.7mm thick and uses the same high-quality industrial diamonds as all Ezelap products and the two plates are set into a durable plastic cradle that maintains long-term durability and plate flatness.

    Plate size is 200x75mm with a number of grit combinations available.

    » View More

    From $145.00 March Sale! (inc GST)
    RRP: $159.00
     
  • On Sale

    Two overlapping 1.15mm stainless blades with clear metric and imperial graduations are paired with a digital protractor angle sensor to measure and show the entire 360° range that is accurate to +/-0.2°. A great improvement for setting angles when laying out or for getting an accurate angle on an existing work piece to transfer. The reverse button flips the reading direction of the display on the large, clear LCD display. Overall length of 275mm.

    » View More

    March Sale! $33.90 (inc GST)
    RRP: $39.90
     
  • On Sale
    25mm Spur Centre TSC-0225
    March Sale! $13.90 (inc GST)
    RRP: $19.90
     
  • On Sale
    From $779.00 March Sale! (inc GST)
    RRP: $779.00
     
  • On Sale
    From $1,199.00 March Sale! (inc GST)
    RRP: $1,199.00
     
  • On Sale
    March Sale! $59.90 (inc GST)
    RRP: $69.90
     
  • On Sale
    From $549.00 (inc GST)
    RRP: $649.00
     
  • On Sale

    These hand laps are the versatile little sharpeners that can. On a durable 100x19mm plastic handle they are great for sharpening virtually anything – scissors, spade bits, knives, fish hooks or anything else you can think of. Available in a wide range of grits or as two different kits.

    » View More

    From $22.50 March Sale! (inc GST)
    RRP: $24.90
     
  • On Sale
    March Sale! $379.00 (inc GST)
    RRP: $449.00
    Out of Stock
     
  • On Sale

    These diamond plates are perfect for hunting and fishing knives, woodworking tools, blades, axes and industrial use. No oil or water is necessary, the surface will remain true and flat. Includes a groove for fish hooks and comes with durable leather pouch for storage.

     

    » View More

    March Sale! $17.90 (inc GST)
    RRP: $19.90
     
  • On Sale

    A great economy option to the bigger and heavier diamond plates. The high-quality industrial-grade diamonds are bonded to a thin flat steel plate substrate and are great for small woodworking tools and other items needing a keen edge. Approximate thickness is 1.35mm Available in a variety of grits.

     

    » View More

    From $21.50 March Sale! (inc GST)
    RRP: $23.90
     
  • On Sale
    From $1,279.00 (inc GST)
    RRP: $1,349.00
     
  • On Sale
    March Sale! $14.90 (inc GST)
    RRP: $19.90
     
  • On Sale
    March Sale! $42.50 (inc GST)
    RRP: $49.90
     
  • On Sale
    March Sale! $31.50 (inc GST)
    RRP: $34.90
     
  • On Sale
    From $179.00 March Sale! (inc GST)
    RRP: $199.00
     
  • On Sale
    March Sale! $12.90 (inc GST)
    RRP: $16.00
     
  • On Sale
    March Sale! $99.00 (inc GST)
    RRP: $129.00
     
  • On Sale
    From $74.90 March Sale! (inc GST)
    RRP: $89.00
     
  • On Sale

    Handle length = 320mm, Blade length = 185mm.

    » View More

    From $56.90 March Sale! (inc GST)
    RRP: $67.00
     
  • On Sale
    From $52.90 March Sale! (inc GST)
    RRP: $62.00
     
  • On Sale
    From $5.00 March Sale! (inc GST)
    RRP: $6.00
     
  • On Sale
    From $8.00 March Sale! (inc GST)
    RRP: $10.00
     
  • On Sale
    March Sale! $135.00 (inc GST)
    RRP: $159.00
     
  • On Sale
    March Sale! $109.00 (inc GST)
    RRP: $129.00
     
  • On Sale
    From $84.90 March Sale! (inc GST)
    RRP: $99.00
     
  • On Sale
    From $58.50 March Sale! (inc GST)
    RRP: $69.00
     
  • On Sale
    March Sale! $89.00 (inc GST)
    RRP: $109.00
     
  • On Sale
    From $58.50 March Sale! (inc GST)
    RRP: $69.00
     
  • On Sale
    From $89.90 March Sale! (inc GST)
    RRP: $105.00
     
  • On Sale
    From $12.90 March Sale! (inc GST)
    RRP: $14.90
     
  • On Sale

    Combination square sets are one of the handiest measuring tools as the basic two-piece square set (ruler and try square head) can be used as a small spirit level, plumb level, internal and external try and mitre square, simple marking gauge and height gauge.

    The square head has a miniature scratch awl located in the base to mark work pieces with a face that can be used on 90 degree and 45 degree angles. The protractor head can move in a 180-degree range and also has a bright bubble level to check horizontal levels, while the centre marker head is handy for locating the centres of round work pieces.

    The iGaging set is machinist-shop quality to the US standard with accuracy over the blade of +/- 0.1 degree. All heads are heavy stabilized cast-iron and machined to standard. We doubt you will find another set with this kind of quality at this price. The 2.18mm satin ground blades are graduated in imperial on both sides. Both sets come with sturdy storage cases and will get a lot of use in your workshop.

    » View More

    From $47.50 March Sale! (inc GST)
    RRP: $54.90
     
  • On Sale

    Finish the edge of your work with an edge at a variety of angles from 15 – 45 degrees. Adjust the bit height to change the size of the chamfer on your work piece up to 32mm.

    » View More

    From $14.50 March Sale! (inc GST)
    RRP: $18.00
     
  • On Sale
    March Sale! $249.00 (inc GST)
    RRP: $299.00
     
  • On Sale
    March Sale! $6.50 (inc GST)
    RRP: $8.00
     
  • On Sale
    March Sale! $39.90 (inc GST)
    RRP: $49.90
     
  • On Sale
    From $19.90 (inc GST)
    RRP: $34.90
     
  • On Sale
    From $3,399.00 March Sale! (inc GST)
    RRP: $3,797.00
     
  • On Sale
    March Sale! $75.00 (inc GST)
    RRP: $95.00
     
  • On Sale
    Depth Gauge MC-8601

    •        Durable metal scale measures in inches or millimeters

    •        Thumb lever for easy lock and release of scale

    •        Wide base with large feet

    •        Straddles most table saw throats for measuring while adjusting

    •        Self-standing - Allows a depth to be set while bringing the blade or bit up to the desired level

    •        Large scale markers and view finder - Easily viewed for accurate adjustments

    » View More

    March Sale! $7.90 (inc GST)
    RRP: $9.90
     
  • On Sale
    From $72.50 March Sale! (inc GST)
    RRP: $85.00
     
  • On Sale
    From $52.90 March Sale! (inc GST)
    RRP: $62.00
     
  • On Sale
    From $84.90 March Sale! (inc GST)
    RRP: $99.00
     
  • On Sale
    From $66.90 March Sale! (inc GST)
    RRP: $79.00
     
  • On Sale

    This double-sided plate is a super-fine diamond/ceramic combination finishing stone to give you the finest edge possible on all tools. No need to strop once you have used one of these. Comes with a durable quality leather pouch.

     

    » View More

    March Sale! $31.50 (inc GST)
    RRP: $34.90
    Out of Stock
     
  • On Sale

    The large LCD display measures heights and depths accurately up to 150mm in three planes – horizontally, vertically and at 45° in metric, decimalized and fractional imperial in 1/128th graduations! The heavy-duty polycarbonate frame can be used freestanding on flat surfaces so you can use both hands elsewhere and comes with a flat and pointed hardened steel anvil points. Can also be locked for extra accuracy. Accurate to within 0.15mm over the whole length of the range.

    » View More

    March Sale! $24.90 (inc GST)
    RRP: $29.90
     
  • On Sale

    Get engineering accuracy with the MiniMag Height Gauge. The powerful magnetic base clamps to any ferrous metal surface for precise measuring of saw blades, router bits or any other application. It has a very large, clear LCD display that reads in metric, decimalized and fractional imperial in 1/128th graduations. It is IP54-splash water, oil and dust resistant with accuracy over the whole 150mm length of 0.0254mm!

    » View More

    March Sale! $79.00 (inc GST)
    RRP: $89.00
     
  • On Sale
    March Sale! $33.90 (inc GST)
    RRP: $39.90
     
  • On Sale
    March Sale! $129.90 (inc GST)
    RRP: $155.00
     
  • On Sale

    Produced to the US standard (0.02mm tolerance), these handy squares have cast-iron machined bases with satin ground blades. The handle can be positioned anywhere along the blade to use as a layout tool as well as a precision square.

    The blade is graduated in imperial on both sides, the 152mm (6in) square has a spirit level in the handle. Like all iGaging products, very well made and a pleasure to use.

    » View More

    From $19.90 March Sale! (inc GST)
    RRP: $23.90
     
  • On Sale
    March Sale! $61.00 (inc GST)
    RRP: $72.00
     
  • On Sale
    From March Sale! $145.00 (inc GST)
    RRP: $169.00
     
  • On Sale
    From $25.90 March Sale! (inc GST)
    RRP: $34.90
     
  • From $109.00 (inc GST)
     
  • $125.00 (inc GST)
     
  • On Sale

    A great addition to your lathe! This hood has an amazing 420 x 320mm opening to collect large quantities of shaving and funnel it to standard 4in pipe – so easy to hook up to a standard extraction system! It has a leading lip around the outside edge of the opening, so it can be pre-drilled and screwed into place. But it may not suit just the lathe; it can suit just about any situation where extraction outlets aren’t available or easy to install.

    » View More

    March Sale! $16.00 (inc GST)
    RRP: $20.00
     
  • On Sale
    March Sale! $9.90 (inc GST)
    RRP: $12.00
     
  • On Sale

    Many customers want to set up their own collection stands next to their work piece. The problem is finding the right connector as a chute. This dust hood can solve many of these workshop problems. It has a reasonable mouth opening of approximately 250 x 110mm and is tapered for efficient dust flow. It is great as a basic to build a larger hood or simply installing on a workbench or machine to collect dust near the action – such as a drill press.

    » View More

    March Sale! $12.00 (inc GST)
    RRP: $15.00
     
  • On Sale

    Simply centre and run the groove cutter along the edge of your veneered MDF or ply board to cut the 60° profile and then centre and run the tongue cutter along your timber edging to match the veneer to create a snug, strong and virtually invisible joint. Suits material 12.7 – 25.4mm thick.

    You can even run the timber edging taller than the main board to create the appearance of a thicker table, say using a 30mm high edging on 19mm to create the appearance of a 30mm-thick table.

    » View More

    March Sale! $99.00 (inc GST)
    RRP: $129.00
     
  • On Sale
    EEE Ultrashine EEE-250
    March Sale! $24.90 (inc GST)
    RRP: $27.90
     
  • On Sale

    When you need to go around a 90 degree corner, this elbow will make it easier to navigate the turn. Elbows are a better option to use than hose because the volume within the elbow stays constant, but the volume in hose that has been bent at a 90 degree angle is reduced, therefore reducing efficiency along the whole length of the system. Available for use in 4in (100mm) extraction systems.

    » View More

    From $4.90 March Sale! (inc GST)
    RRP: $6.00
     
  • On Sale

    Produced to German DIN 875-1 Standard, these squares have a square tolerance of 0.005mm and straightness tolerance of 0.0127mm. The 4in square has a 2.18mm blade with 11.18mm base, while the 6in square has a heavy 2.4mm blade and 15.4mm base. Perfect weight in the hand – great to use and accuracy you can rely on.

    » View More

    From $20.90 March Sale! (inc GST)
    RRP: $24.90
     
  • On Sale

     

     

    The 5.00mm hardened steel blades are meticulously ground and lapped for straightness and parallelism, and they have a beveled knife edge with imperial 1/64in scales, which means they can be used as precision rulers. For storage they have a hanging hole as well as a protective case if you prefer to store them in a drawer. Accurate to 0.025mm over the length of blade.

     

    » View More

    From $33.90 March Sale! (inc GST)
    RRP: $39.90
     
  • On Sale
    Exactor MC-8406
    March Sale! $11.90 (inc GST)
    RRP: $17.90
     
  • On Sale
    From $12.90 March Sale! (inc GST)
    RRP: $17.90
     
  • On Sale
    From $35.00 March Sale! (inc GST)
    RRP: $49.00
     
  • $44.90 (inc GST)
    RRP: $54.90
     
  • On Sale

     

    Finger joints are the strongest method of butt jointing when using a router bit to cut the profile. The tapered fingers interlock and create a joint that is stronger than the timber by increasing the gluing surface area by up to 10 times over a standard butt joint.

    The tapered profile makes it simpler and easier to assemble the work pieces when gluing. Finger joints are used in many structural jointing applications where strength is of the greatest importance and you can rest easy knowing that you have creating a bond stronger than wood when using this method of jointing.

    » View More

    March Sale! $89.00 (inc GST)
    RRP: $109.00
     
  • On Sale
    March Sale! $3.00 (inc GST)
    RRP: $4.00
     
  • On Sale
    From $9.90 March Sale! (inc GST)
    RRP: $12.00
     
  • On Sale

    The hose that we stock is made of heavy-duty polyethylene plastic. It is clear so that blockages are easy to see and are available in a variety of different diameters to suit just about every extraction application. The hose has a reinforced banding around the outside to ensure that retains its shape and is suitably rugged for all workshops. Hose is sold per metre.

    » View More

    From $27.90 March Sale! (inc GST)
    RRP: $32.90
     
  • On Sale

    Also available is the heavy-duty flush trimming bits with bottom as well as top bearing guides that make it easier to use in just about any trimming application, whether you need to locate your template top or bottom on the work piece.

    » View More

    From $27.90 March Sale! (inc GST)
    RRP: $35.00
     
  • On Sale

     

    The heavy-duty trimming bits are larger diameter and use thicker carbide tips to remove more material quickly. With a negative shear on the blade they provide a smoother finish on timber edges than standard trimming bits.

    » View More

    From $22.90 March Sale! (inc GST)
    RRP: $29.00
     
  • On Sale

     

    Pattern following bits are perfect for following patterns when used in a hand-held router application if the template is located on top of the timber or in a router table when the template is located at the bottom of the work piece. 

    » View More

    From $16.90 March Sale! (inc GST)
    RRP: $21.00
     
  • On Sale
    From $46.90 March Sale! (inc GST)
    RRP: $59.00
     
  • On Sale

     

    Flush trim bits are perfect for removing excess material once timber or laminates have been jointed or for duplicating the same pattern when used in conjunction with a master template across multiple work pieces.

    » View More

    From $13.50 March Sale! (inc GST)
    RRP: $17.00
     
  • On Sale
    March Sale! $115.00 (inc GST)
    RRP: $119.00
     
  • On Sale
    From $84.90 March Sale! (inc GST)
    RRP: $99.00
     
  • On Sale

    We are pleased to introduce the world’s first triple-blade downshear flush trim bit. Coming in at 22.2mm diameter it is designed to provide the ultimate finish on all materials with minimal chatter due to the bit body absorbing most vibration.

    Due to the extra blade, there are 50% more cuts per inch, creating the smoother, cleaner result as well as staying sharper for 50% longer than standard flush trim bits. As the blades are downshear, one blade stays in contact with the work piece for virtually the whole time, coming close to performing like a spiral bit for a fraction of the cost.

    The bits are only available with a ½in shank and can be bought with standard top bearing guide only or bearing mounted both top and bottom so it can be used in all flush trimming operations. 

    » View More

    From $39.90 March Sale! (inc GST)
    RRP: $50.00
     
  • On Sale

    When you need to hide a joint that’s less than perfect, use the v-groove flush trim bit to cut a V recess over the jointed edge. Also great for adding a sharp detail close to the edge of work pieces.

    » View More

    From $21.50 March Sale! (inc GST)
    RRP: $27.00
     
  • On Sale

    EZE-Fold models have a carrying case that unfolds into a handle. When closed the case protects the diamond surface and when open, the case becomes a functional handle.

    Get two popular grits – 400 and 1200-Grit in the one unit. The diamond plate areas measure 102 x 19mm each.

    » View More

    March Sale! $53.90 (inc GST)
    RRP: $59.90
     
  • On Sale

    EZE-Fold models have a carrying case that unfolds into a handle. When closed the case protects the diamond surface and when open, the case becomes a functional handle.

    A great shape for a variety of applications including the sharpening of kitchen knives plus other long sharp edges. Available in the most popular 600-Grit (fine) model.

    » View More

    March Sale! $39.90 (inc GST)
    RRP: $44.90
     
Results 1 - 96 of 194 Show: Sort By: