3HP Dust Extractor

  • 3HP Dust Extractor FM-400

    A great low-cost option for a workshop extracting dust from one or more machines in a trade environment generating large volumes of shavings. It has a rubber-sealed metal connection for travel from inlet to bags resulting in a better seal and more suction.

    It also comes on castors for movement around a workshop if necessary, though most users leave it stationed in one place.

    Specifications - 

    Motor 2250W (3HP)
    Air Flow 1900CFM
    Static Pressure 14.0"/H2O
    Inlet Diameter 3 x 4in or 1 x 6in
    Bag Diameter 500mm
    Bag Capacity 307L (Combined)
    Overall Size 1950 x 1450 x 540mm

    It Starts With Air Flow

     

    There are two measurements of extractor efficiency – air flow which we measure in in cubic feet/minute (CFM) and the other lesser known measurement is static pressure that we measure in inches of water (in/H2O).

    Most woodworkers buy on CFM, but this is only a measurement of the extractor flow when no hose is attached and at the head of the extractor – not a common real-world measure. On the other hand, static pressure measures the resistance once hose has been attached.

    This will of course vary depending on the hose size so we list all static pressure measurements with the most common size 4in hose for consistency of comparison. As hose size increases static pressure will decrease and vice versa for smaller hose.

    So make sure when you compare extractors that you get the static pressure rating as well as the CFM to ensure that you are getting a machine that will work as well as the Sherwood range. 

    $579.00 (inc GST)
     

Timbecon - Rewards Programearn 1 point for every dollar

Find out more

Subscribe to our Newsletter

You'll be the first to know about our latest offers

Subscribe Here