A great value-for-money extractor for home workshop use. The larger motor and 300mm impeller creates extra capacity making it generally suitable for extraction of a single large dust-volume generating machine at any one time like planing or heavy-duty routing where one of the inlets can be blocked off for maximum suction through one path.
Will also extract dust simultaneously from two machines creating a normal amount of dust - such as a table saw, bandsaw, sander or lathe etc.
||2 x 4in or 1 x 5in
||1950 x 875 x 540mm
PLEASE NOTE - the extractor is shown fitted with the optional Pleated Filter Cartridge (PFC). It normally comes with a needle felt bag as shown in the last image of the gallery.
It Starts With Air Flow
There are two measurements of extractor efficiency – air flow which we measure in in cubic feet/minute (CFM) and the other lesser known measurement is static pressure that we measure in inches of water (in/H2O).
Most woodworkers buy on CFM, but this is only a measurement of the extractor flow when no hose is attached and at the head of the extractor – not a common real-world measure. On the other hand, static pressure measures the resistance once hose has been attached.
This will of course vary depending on the hose size so we list all static pressure measurements with the most common size 4in hose for consistency of comparison. As hose size increases static pressure will decrease and vice versa for smaller hose.
So make sure when you compare extractors that you get the static pressure rating as well as the CFM to ensure that you are getting a machine that will work as well as the Sherwood range.
Pleated filter shown fitted – machine comes standard with needle felt filter top bag
Please note that due to the shipping weight of this machine that a tailgate drop fee of $80.00 may need to be charged. Please see our Freight and Returns for more information.