The Sherwood Router Table Coping Sled is the fastest, safest way to perform difficult end-grain shaping tasks on the router table. Cut rail-and-stile joinery accurately and cleanly. Make tenons, half-laps, and bridle joints with a smooth finish and no blowout. An essential bit of kit for every router table user, from the beginner to the expert.
Accuracy
The jig holds the board firmly down on the super-flat 6mm aluminium base, preventing it from rotating or lifting, ensuring perfect accuracy as it travels across the bit.
Control
Two comfortable handles give complete control over the feed rate while keeping your hands well away from the bit, improving your safety as well as your results.
Rigidity
The 6mm aluminium base stays flat and will not flex under load. It will remain mated to the router table surface for the entire cutting operation, delivering a flat, straight cut every time.
Versatility
The Sherwood Router Table Coping Sled holds boards up to 150mm wide plus a 5mm backing strip, and will accept tapered workpieces of up to 8°. Plenty of space for sacrificial boards to be clamped in behind the workpiece, eliminating blow-out on the back of the cut.
No Mitre Channel Required
The jig registers on your router table’s fence, not a mitre channel, so setting the depth of cut is super-simple. The fence guide is clear acrylic, allowing you to keep an eye on what’s going on during the cut.
Rigid 6mm aluminium base eliminates flex and stays flat, ensuring clean results without taking multiple passes. Boost your consistency and increase your productivity.
Comfortable handles keep you in perfect control for the duration of the cut, delivering safety and efficiency in your end-grain work.
Fantastic capacity: boards up to 150mm (six old-fashioned inches) can be positioned in the jig. Expand the range of possibilities on your router table.
The Sherwood Router Table Coping Sled holds the workpiece securely as it passes the bit, reducing the chance of having an accident or wasting valuable stock.