The Mark of Precision!
Super accurate measuring and layout tools that enable woodworkers of all experience levels to improve the quality of their work. The INCRA Rules use a simple mechanism to make all layout work fast, repeatable, and dead-on accurate.
The 300mm Precision Rule Set includes the Precision Marking Rule, Precision T-Rule and Precision Bend Rule.
Marking relative to the end or edge of your workpiece:
Put the T-Bar against the edge of your workpiece, then make your mark in the hole or slot at the desired measurement.
Drawing a line parallel to the edge of your workpiece:
You can draw a line by sliding the T-Bar along the edge of your workpiece while holding your pencil vertically in one of the holes at your desired measurement.
Precision Bend Rule
Press against the edge of your workpiece and place your mark in the hole or slot at the desired measurement.
Using the vertical scale:
Place a sharp pencil in in the hole at the desired vertical measurement and draw a line parallel to the edge.
Precision Marking Rule
Place your sharp pencil point or scribe in the desired hole or slot, then make your mark.
Use the scale lines to on the edges to to make precession measurements.