Free shipping on eligible orders over $149*

Oneida  |  SKU: AXD-000002-DDB

Oneida Dust Deputy Cyclone Vacuum Bagger Kit

$189.90 $399.00
Melbourne: 9, Perth: 2

Sale ends in:

00 : 00 : 00 : 00
Days
Hours
Mins
Secs

Request Further Information

Oneida Dust Deputy Cyclone Vacuum Bagger Kit

The Dust Deputy turns your tired old wet ‘n’ dry vacuum machine into an efficient, effective two-stage extraction system, minimising suction loss, reducing filter changes and improving workshop air quality.

Its cyclone technology works on a wide range of materials. Whether you are a woodworker, a DIYer, a bone or stone carver, or a teenager whose parents are coming home after a weekend away and you need to tidy up in a hurry, the Dust Deputy will speed up your cleanup.  

The Dust Deputy Bagger Kit includes:

  • Anti-Static Dust Deputy Cyclone Separator
  • Powder-Coated Steel Wall Mount Bracket
  • 3.9-Gallon Accumulation Bin
  • Steel Grid
  • Five 4 Mil Thick 28" x 40" Bags
  • Two Silicone Rubber Bands
  • 2" x 6' Vacuum Connection Hose
  • Two 90 Degree Hose Elbow Adapters
  • 2.5" Adjustable Hose/Band Clamp
  • Two Foam Gaskets
  • Hardware

How it Works

The dust-laden air passes through the Dust Deputy Cyclone, which separates out 99% of the dust. The cleaned air passes into your shop vacuum, while the dust falls into an accumulation bin with an open grid bottom.

A heavy (4 mil thick) plastic bag is held in place around the accumulation bin. When the vacuum is turned on, the bag is sucked up against the grid. When the vacuum is turned off, the bag drops back down and the collected dust falls from the accumulation bin into the bag. When the vacuum is turned on again, the previously bagged dust remains in the bag while newly captured dust collects in the accumulation bin. 

This action can be repeated until the bag is two-thirds full, at which point the bag should be removed and replaced.

Cyclone Technology

The principle behind cyclone separation is straightforward. The air containing particles enters the cyclone chamber from the side which causes it to spin rapidly around inside the chamber. The dust particles are thrown against the inside wall of the chamber, where they drop out of the airflow and fall into the collection chamber beneath. A low pressure zone develops in the centre of the cyclone through which the clean air is able to exit. Cyclone separation typically removes 99% of particles, leaving the smallest 1% to be captured by filtration.

Universal Compatibility

Any wet ‘n’ dry vacuum that is rated at 50cfm or greater (for example, shopvacs) can be used with the Dust Deputy. Adaptors may be required to fit the vacuum’s ducting onto the 2” fitting on the cyclone. 

Reduce filter changes

There are no filters inside the Dust Deputy – the dust is removed solely through cyclonic action. Only 1% of the material makes it through the cyclone to be caught in your vacuum’s filter, massively reducing the number of times you need to clean it out.

Reduce Suction Loss

A filter caked with dust will increase resistance to the airflow and can significantly reduce suction. The Dust Deputy removes the dust before it even gets to the vacuum. When your filter is not getting blocked up, the vacuum will continue to run at full air velocity for much longer.

Cyclonic Separation Efficiency

Removes over 99% of fine wood dusts

Waste Capacity

Customizable

Inlet Size

2" O.D. (Tapered) 1-3/4" I.D.

Outlet Size

2" O.D. (Tapered) 1-3/4" I.D.

Discharge Size

3" I.D.

Primary Build Materials

Polypropylene

Static Resistance Rating

Anti-Static

Colour

Clear

Depth

12-3/4"

Height

24-1/2"

Contents

Cyclone, 3.9-Gallon Accumulation Bin, Wall Mount, Steel Grid, 2x Elbows, 2" x 6' Hose, 5x Bags, 2x Rubber Bands, 2x Gaskets, & Mounting Hardware

Country of Origin

Made in USA

Oneida

Oneida Dust Deputy Cyclone Vacuum Bagger Kit

$189.90 $399.00

The Dust Deputy turns your tired old wet ‘n’ dry vacuum machine into an efficient, effective two-stage extraction system, minimising suction loss, reducing filter changes and improving workshop air quality.

Its cyclone technology works on a wide range of materials. Whether you are a woodworker, a DIYer, a bone or stone carver, or a teenager whose parents are coming home after a weekend away and you need to tidy up in a hurry, the Dust Deputy will speed up your cleanup.  

The Dust Deputy Bagger Kit includes:

  • Anti-Static Dust Deputy Cyclone Separator
  • Powder-Coated Steel Wall Mount Bracket
  • 3.9-Gallon Accumulation Bin
  • Steel Grid
  • Five 4 Mil Thick 28" x 40" Bags
  • Two Silicone Rubber Bands
  • 2" x 6' Vacuum Connection Hose
  • Two 90 Degree Hose Elbow Adapters
  • 2.5" Adjustable Hose/Band Clamp
  • Two Foam Gaskets
  • Hardware

How it Works

The dust-laden air passes through the Dust Deputy Cyclone, which separates out 99% of the dust. The cleaned air passes into your shop vacuum, while the dust falls into an accumulation bin with an open grid bottom.

A heavy (4 mil thick) plastic bag is held in place around the accumulation bin. When the vacuum is turned on, the bag is sucked up against the grid. When the vacuum is turned off, the bag drops back down and the collected dust falls from the accumulation bin into the bag. When the vacuum is turned on again, the previously bagged dust remains in the bag while newly captured dust collects in the accumulation bin. 

This action can be repeated until the bag is two-thirds full, at which point the bag should be removed and replaced.

Cyclone Technology

The principle behind cyclone separation is straightforward. The air containing particles enters the cyclone chamber from the side which causes it to spin rapidly around inside the chamber. The dust particles are thrown against the inside wall of the chamber, where they drop out of the airflow and fall into the collection chamber beneath. A low pressure zone develops in the centre of the cyclone through which the clean air is able to exit. Cyclone separation typically removes 99% of particles, leaving the smallest 1% to be captured by filtration.

Universal Compatibility

Any wet ‘n’ dry vacuum that is rated at 50cfm or greater (for example, shopvacs) can be used with the Dust Deputy. Adaptors may be required to fit the vacuum’s ducting onto the 2” fitting on the cyclone. 

Reduce filter changes

There are no filters inside the Dust Deputy – the dust is removed solely through cyclonic action. Only 1% of the material makes it through the cyclone to be caught in your vacuum’s filter, massively reducing the number of times you need to clean it out.

Reduce Suction Loss

A filter caked with dust will increase resistance to the airflow and can significantly reduce suction. The Dust Deputy removes the dust before it even gets to the vacuum. When your filter is not getting blocked up, the vacuum will continue to run at full air velocity for much longer.

Cyclonic Separation Efficiency

Removes over 99% of fine wood dusts

Waste Capacity

Customizable

Inlet Size

2" O.D. (Tapered) 1-3/4" I.D.

Outlet Size

2" O.D. (Tapered) 1-3/4" I.D.

Discharge Size

3" I.D.

Primary Build Materials

Polypropylene

Static Resistance Rating

Anti-Static

Colour

Clear

Depth

12-3/4"

Height

24-1/2"

Contents

Cyclone, 3.9-Gallon Accumulation Bin, Wall Mount, Steel Grid, 2x Elbows, 2" x 6' Hose, 5x Bags, 2x Rubber Bands, 2x Gaskets, & Mounting Hardware

Country of Origin

Made in USA

View product