Free shipping on eligible orders over $149*

Crown  |  SKU: 243-KW

Crown Bowl Gouge 19mm M2 Cryogenic Steel Woodturning Tool

$399.90
Melbourne: 7, Perth: 1

Sale ends in:

00 : 00 : 00 : 00
Days
Hours
Mins
Secs

Request Further Information

Crown Bowl Gouge 19mm M2 Cryogenic Steel Woodturning Tool

Eligible for FREE Shipping*

Crown Bowl Gouge 19mm - Cryogenic Steel

When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day you hand them down to the next generation of turners. Beautifully balanced and finished, these tools have been made for people who appreciate good workmanship and demand quality from their tools.

So why does the 19mm Bowl Gouge get its own listing? Why the price jump? 

When you pick up this monster of a bowl gouge you can tell instantaneously that this is not just a small increase in size over its little 13mm brother. There is a LOT more steel in this gouge. It is dense. This means that Crown needed to cryo freeze it for a significantly longer time to make sure the temperature got right down into the core of this gouge. This is a tool that Crown spends more time on than almost every other tool in the range to ensure that its metallurgical state is flawless. This is the big Bertha of the range. And any serious turner would love this along with its brother the 19mm side grind gouge in their collection.

Bowl gouges are used for turning along the grain and also for turning on end grain. This is exemplified by the relatively straight profile of the tip of the gouge so that it scrapes rather than peels the timber off, to provide a smoother finish on end grain. The flute is deeper on bowl gouges so that the cutting edge is supported and large quantities of waste can be removed easily.

They have a longer length of blade and handle usually so that greater leverage and a deeper depth of cut can be achieved easily and safely. The edge is often ground at a 55 - 60 degree angle so that it can turn on end grain with minimal dig-in.

  • Hardened to 66/69 HRC, massively out performing standard HSS tool
  • Cryogenically treated giving a huge increase in performance over standard M42
  • Beautifully balanced 'Copper black handles'
  • Triple tempered for Ultra high performance
  • Hand Honed to a Razor Edge
  • Hand crafted in Sheffield, England

So what makes Crown special?

Crown realised that you could buy an M2 steel chisel from any number of tool makers. They decided to be the first to push the status quo and use their knowledge of metallurgy to become the innovators of their field. They wanted to be on the forefront of high performance when it came to turning tools and that is exactly what you get when you buy a Crown cryogenic steel tool; a high performance, innovative and top of the range tool.

Crown Hand Tools

As a family owned company, Crown Hand Tools and their loyal staff have been proudly manufacturing traditional woodworking hand tools for over fifty years. Handmade to the finest quality, Crown has found the perfect equilibrium between tradition and innovation, making their tools beautiful as well as functional. Master Craftsmen hand forge, temper and grind their tools as their ancestors did, whilst also using modern processes and materials, such as Cryogenics and Powder Metallurgy. This combination of old and new techniques ensures Crown are giving their customers what they consider the best quality hand tools available.

About Crown Cryogenic Steel

The Crown Cryogenic range are high quality turning tools with a difference. Using cryogenically treated tools means that now you can turn more and sharpen less often. The tools are made from M2 Steel that are heat treated normally then taken down to temperatures as low as -185°C which changes the molecular structure of the steel.

The two main crystals in tooling steel are the larger and softer austenitic and the smaller, more stable martensite. Normal heat treatment seeks to transform the austenite to martensite to produce steel with good wear characteristics and an amount of ductile properties.

The cryogenic process greatly enhances and accelerates the austenitic transformation. Another benefit is that at these extreme temperatures, fine ‘eta’ carbides are formed within the carbon structure. Growing very slowly and only at these very low temperatures, ‘eta’ carbides are extremely small and act as a ‘filler’ between the other crystals in the metal.

The combined effect of heat treatment and cryogenic processing is to produce a refined crystal structure in your hand tool that will give a lifetime’s service by producing a blade that will retain its edge longer and give a superior ‘feel’ in use.

Overall Length 610mm
Handle Length 350mm
Blade Length 260mm
Blade Size 19mm

 

Crown

Crown Bowl Gouge 19mm M2 Cryogenic Steel Woodturning Tool

$399.90

Crown Bowl Gouge 19mm - Cryogenic Steel

When picking up a Crown tool you can instantly tell this is not some mass produced tool to be used a few times and thrown away. These lovingly crafted tools are the same tools you will be using the day you hand them down to the next generation of turners. Beautifully balanced and finished, these tools have been made for people who appreciate good workmanship and demand quality from their tools.

So why does the 19mm Bowl Gouge get its own listing? Why the price jump? 

When you pick up this monster of a bowl gouge you can tell instantaneously that this is not just a small increase in size over its little 13mm brother. There is a LOT more steel in this gouge. It is dense. This means that Crown needed to cryo freeze it for a significantly longer time to make sure the temperature got right down into the core of this gouge. This is a tool that Crown spends more time on than almost every other tool in the range to ensure that its metallurgical state is flawless. This is the big Bertha of the range. And any serious turner would love this along with its brother the 19mm side grind gouge in their collection.

Bowl gouges are used for turning along the grain and also for turning on end grain. This is exemplified by the relatively straight profile of the tip of the gouge so that it scrapes rather than peels the timber off, to provide a smoother finish on end grain. The flute is deeper on bowl gouges so that the cutting edge is supported and large quantities of waste can be removed easily.

They have a longer length of blade and handle usually so that greater leverage and a deeper depth of cut can be achieved easily and safely. The edge is often ground at a 55 - 60 degree angle so that it can turn on end grain with minimal dig-in.

  • Hardened to 66/69 HRC, massively out performing standard HSS tool
  • Cryogenically treated giving a huge increase in performance over standard M42
  • Beautifully balanced 'Copper black handles'
  • Triple tempered for Ultra high performance
  • Hand Honed to a Razor Edge
  • Hand crafted in Sheffield, England

So what makes Crown special?

Crown realised that you could buy an M2 steel chisel from any number of tool makers. They decided to be the first to push the status quo and use their knowledge of metallurgy to become the innovators of their field. They wanted to be on the forefront of high performance when it came to turning tools and that is exactly what you get when you buy a Crown cryogenic steel tool; a high performance, innovative and top of the range tool.

Crown Hand Tools

As a family owned company, Crown Hand Tools and their loyal staff have been proudly manufacturing traditional woodworking hand tools for over fifty years. Handmade to the finest quality, Crown has found the perfect equilibrium between tradition and innovation, making their tools beautiful as well as functional. Master Craftsmen hand forge, temper and grind their tools as their ancestors did, whilst also using modern processes and materials, such as Cryogenics and Powder Metallurgy. This combination of old and new techniques ensures Crown are giving their customers what they consider the best quality hand tools available.

About Crown Cryogenic Steel

The Crown Cryogenic range are high quality turning tools with a difference. Using cryogenically treated tools means that now you can turn more and sharpen less often. The tools are made from M2 Steel that are heat treated normally then taken down to temperatures as low as -185°C which changes the molecular structure of the steel.

The two main crystals in tooling steel are the larger and softer austenitic and the smaller, more stable martensite. Normal heat treatment seeks to transform the austenite to martensite to produce steel with good wear characteristics and an amount of ductile properties.

The cryogenic process greatly enhances and accelerates the austenitic transformation. Another benefit is that at these extreme temperatures, fine ‘eta’ carbides are formed within the carbon structure. Growing very slowly and only at these very low temperatures, ‘eta’ carbides are extremely small and act as a ‘filler’ between the other crystals in the metal.

The combined effect of heat treatment and cryogenic processing is to produce a refined crystal structure in your hand tool that will give a lifetime’s service by producing a blade that will retain its edge longer and give a superior ‘feel’ in use.

Overall Length 610mm
Handle Length 350mm
Blade Length 260mm
Blade Size 19mm

 

View product