Sherwood 3HP Cyclone Dust Extractor Two-Stage Dust Collection 750CFM

Time to get serious about dust extraction 

At 750CFM (cubic feet per minute) the 2200W (3HP) motor provides exceptional suction whilst being able to be run on a standard 10A house plug. This unit has more than enough power to handle 2 machines at once through its two 100mm intakes or 125mm single intake. Unlike single-stage dust extractors, these are high static pressure/low volume. This means though the CFM is lower than a single-stage machine, this unit provides more than enough dust collection to handle multiple machines simultaneously. This unit is perfect for a medium garage workshop or small to medium, professional workshop.

The whole unit is mounted on casters allowing it to be moved to where it is needed as well as the dust drum which is also on casters for quick and easy removal and emptying. This means you can have one unit for your entire workshop. 

Why Go Cyclone?

By fitting a cyclone in-line with the dust extraction, the cyclone removes the bulk of the debris and dust and dumps it into an easy to change drum before the dust hits the filter and waste bag. This means less changes of expensive cartridge filters and less changes of the waste bag.

Because much of the dust is removed from the air before it hits the 1 micron filter, the filter lasts longer and is able to keep the air quality of your workshop cleaner for much longer. As filters clog, extractor efficiency drops off, because cyclones keep your filter cleaner for longer, you efficiency remains higher for longer.

Features

• All the benefits of a single-stage dust extractor with the added capabilities of cyclone separation.
• 750 CFM of suction
• Suitable for small to medium sized trade workshops
• 2x 100ml inlets or 1x 125mm inlet
• 1 micron cartridge filter for optimal air quality