Milescraft DrillPump750 Water Transfer Pump 3/4in Hose Connector 3/8in Bit Shank

Self Priming, multi-purpose water transfer DrillPump750 can be used to pump water from virtually anywhere, from a flooded basement to a simple fish tank.

The DrillPump750 is designed to work with most electrical drills with a maximum speed of 2,800 RPM. This water transfer pump is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. The hose connection is 3/4in and uses any standard garden hose. The unit pumps up to 750 gallons per hour and is self-priming up to 12 feet. The 3/8in shank on this unit fits all common chucks for most drills.

Features

• Pumps up to 750 (3000 litres) gallons per hour
• Self-priming up to 12 feet
• 3/8” shank on this unit fits all common chucks
• 3/4″ hose connection, for use with a standard garden hose

Tips & Tricks

• Never run the DrillPump750 in reverse
  
• DrillPump750 will not turn by hand, this must be chucked to the drill.
  
• DrillPump750 must be mounted for proper usage, do not hold in hand.
  
• The hoses should be in good condition, include a gasket, and be completely tightened for priming
  
• After every use apply a small amount of silicone grease. To apply, remove the black housing screws and cover, and put a bit of grease on the housing where the rubber fan blades touch, then reassemble. Any spray lubricants, such as WD-40, are not recommended, as they do not provide sufficient lubrication for this product and can cause damage to the internals of the pump.
  
• Do not get the drill wet, or use the drill pump with flammable liquids.

Specifications

Delivery Rate Max: 3,000 liters per hour

Hose Connection: 1/2in (13 mm) / 3/4in (19 mm)

Threaded Connection: 3/4in (19 mm)

Suction Height: (4 m)

Dry Running Max.: 30 seconds

Drill Output Min.: 600W

Rotation Speed Max.: 2,800 RPM

Shank Diameter: 3/8in (9.5mm)

Housing Material: Glass Filled Nylon