Free shipping on eligible orders over $149*

Melbourne Tool Company  |  SKU: MTC-49476

Melbourne Tool Company Blade for Low Angle Smoothing Hand Plane 25 degree Bevel

$38.30 $47.90
Melbourne: 2, Perth: 2

Sale ends in:

00 : 00 : 00 : 00
Days
Hours
Mins
Secs

Request Further Information

Melbourne Tool Company Blade for Low Angle Smoothing Hand Plane 25 degree Bevel

Eligible for FREE Shipping*

MTC low angle planes are designed with the bevel of the blade facing upwards when installed in the plane. This low angle design offers you the option to choose between three different blade cutting angles to suit the material and work at hand. This is a great advantage over traditional hand planes where the downward facing bevel is only present to relieve the cut. Take control of your woodworking with MTC low angle planes and blades.

Three blades for every challenge

The universal truth about woodworking is that wood is not a uniform material. Wood has grain. Long grain, short grain, quarter grain, end grain and cranky grain. Wood can also be hard or soft, stringy or dense. The point is that wood is not uniform so you need tools that can deal with this. MTC low angle planes are the answer. MTC offers you three blades each with a different cutting angle. These allow you to deal with the variations in wood and technique as required. A very low 25 degree cutting angle for shaving end grain. A middle of the road 38 degree for smoothing. And a high angle of 50 degrees for figured and cranky timbers.

The 25 degree blade

MTC low angle planes are supplied with a 25 degree blade standard. Together with the cast bed angle of the plane of 12 degrees, the effective cutting angle achieved is 37 degrees. Using the smoothing plane, this bevel angle is perfect for shaving across end grain - the short ends of your wood where you are cutting laterally across the grain. End grain can be tough work without the right gear. Your MTC plane fitted with a sharp low 25 degree blade is the perfect tool for this job.

M2 High Speed Steel (HSS) blades

MTC has chosen M2 High Speed Steel (HSS) for the blades. M2 HSS has high abrasion resistance which means it will hold a sharp edge much longer than many other steels. This also means that it may take a little longer to bring up an edge. Don’t worry, you will be leaving your sharpening gear on the shelf for a lot longer too. MTC plane blades are also thicker than the average plane, this eliminates vibration is the cut, ensuring a smooth uniform finish.

Owner’s manual

MTC planes are delivered securely packaged in a foam lined cardboard box. Inside is a QR code you can scan to download your comprehensive Owner’s Manual. Visit the Melbourne Tool Company website for additional products, information downloads and video content.

Brand Melbourne Tool Company (MTC)
Country of Origin Designed in Melbourne Australia, manufactured in China
Warranty Limited lifetime
Plane steel M2 HSS
Plane blade dimensions 3.4 x 51 x 95mm
Melbourne Tool Company

Melbourne Tool Company Blade for Low Angle Smoothing Hand Plane 25 degree Bevel

$38.30 $47.90

MTC low angle planes are designed with the bevel of the blade facing upwards when installed in the plane. This low angle design offers you the option to choose between three different blade cutting angles to suit the material and work at hand. This is a great advantage over traditional hand planes where the downward facing bevel is only present to relieve the cut. Take control of your woodworking with MTC low angle planes and blades.

Three blades for every challenge

The universal truth about woodworking is that wood is not a uniform material. Wood has grain. Long grain, short grain, quarter grain, end grain and cranky grain. Wood can also be hard or soft, stringy or dense. The point is that wood is not uniform so you need tools that can deal with this. MTC low angle planes are the answer. MTC offers you three blades each with a different cutting angle. These allow you to deal with the variations in wood and technique as required. A very low 25 degree cutting angle for shaving end grain. A middle of the road 38 degree for smoothing. And a high angle of 50 degrees for figured and cranky timbers.

The 25 degree blade

MTC low angle planes are supplied with a 25 degree blade standard. Together with the cast bed angle of the plane of 12 degrees, the effective cutting angle achieved is 37 degrees. Using the smoothing plane, this bevel angle is perfect for shaving across end grain - the short ends of your wood where you are cutting laterally across the grain. End grain can be tough work without the right gear. Your MTC plane fitted with a sharp low 25 degree blade is the perfect tool for this job.

M2 High Speed Steel (HSS) blades

MTC has chosen M2 High Speed Steel (HSS) for the blades. M2 HSS has high abrasion resistance which means it will hold a sharp edge much longer than many other steels. This also means that it may take a little longer to bring up an edge. Don’t worry, you will be leaving your sharpening gear on the shelf for a lot longer too. MTC plane blades are also thicker than the average plane, this eliminates vibration is the cut, ensuring a smooth uniform finish.

Owner’s manual

MTC planes are delivered securely packaged in a foam lined cardboard box. Inside is a QR code you can scan to download your comprehensive Owner’s Manual. Visit the Melbourne Tool Company website for additional products, information downloads and video content.

Brand Melbourne Tool Company (MTC)
Country of Origin Designed in Melbourne Australia, manufactured in China
Warranty Limited lifetime
Plane steel M2 HSS
Plane blade dimensions 3.4 x 51 x 95mm
View product