Free shipping on eligible orders over $149*

Torquata  |  SKU: SCD-032-Q

Torquata Spiral Downcut Router Bits 1/4in Shank Solid Carbide

$35.90
Melbourne: 10+, Perth: 1

Sale ends in:

00 : 00 : 00 : 00
Days
Hours
Mins
Secs
Size

Request Further Information

Torquata Spiral Downcut Router Bits 1/4in Shank Solid Carbide

Eligible for FREE Shipping*

Downcut Spiral Router Bits with Solid Carbide for enhanced accuracy

Torquata solid carbide spiral bits begin life as extra-hard C4 micro grain carbide, ground using sophisticated 6-Axis C.N.C. to grind their spiral geometry.  The precision of the spiral and hardness of carbide allows for a very sharp edge and typically longer edge sharpness. A straight bit can't compete with that. The geometry and top point allow you to plunge into your work like a drill, using a constant shearing action when making the cuts.

Using handheld, downcut bits ejects the waste down with a smoother top edge where plunged. Used in a table, downcut bits eject wastes upward with a smoother bottom edge.

Please note that while downcut bits are a preferred option when morticing, signwriting etc. as they leave a finer top edge finish, that because the waste is ejected into the cavity being routed, that the waste can potentially cause the router to lift in operation. 

If you're looking for the opposite chip ejection and edge finish you need to check out the Upcut Spiral Bit range.

Spiral bits work perfectly on all forms of solid timber, along, across and on end-grain and leave razor-sharp edges on melamine, veneered boards, ply, MDF and chipboard.

Watch the full video for a full explanation and rundown of these amazing router bits!

Specifications

Product Code Shank Size Cutting Diameter
Metric
Cutting Diameter
Imperial
Cutting Height
Metric
Cutting Height
Imperial
Overall Length
Metric
SCD-032-Q 1/4in 3.2 1/8in 12.7 1/2in 50.8
SCD-040-Q 1/4in 4.0 5/32in 12.7 1/2in 50.8
SCD-048-Q 1/4in 4.8 3/16in 19.0 3/4in 50.8
SCD-064-Q 1/4in 6.4 1/4in 19.0 3/4in 50.8
SCD-064-XQ 1/4in 6.4 1/4in 25.4 1in 63.5
Torquata

Torquata Spiral Downcut Router Bits 1/4in Shank Solid Carbide

From $35.90

Downcut Spiral Router Bits with Solid Carbide for enhanced accuracy

Torquata solid carbide spiral bits begin life as extra-hard C4 micro grain carbide, ground using sophisticated 6-Axis C.N.C. to grind their spiral geometry.  The precision of the spiral and hardness of carbide allows for a very sharp edge and typically longer edge sharpness. A straight bit can't compete with that. The geometry and top point allow you to plunge into your work like a drill, using a constant shearing action when making the cuts.

Using handheld, downcut bits ejects the waste down with a smoother top edge where plunged. Used in a table, downcut bits eject wastes upward with a smoother bottom edge.

Please note that while downcut bits are a preferred option when morticing, signwriting etc. as they leave a finer top edge finish, that because the waste is ejected into the cavity being routed, that the waste can potentially cause the router to lift in operation. 

If you're looking for the opposite chip ejection and edge finish you need to check out the Upcut Spiral Bit range.

Spiral bits work perfectly on all forms of solid timber, along, across and on end-grain and leave razor-sharp edges on melamine, veneered boards, ply, MDF and chipboard.

Watch the full video for a full explanation and rundown of these amazing router bits!

Specifications

Product Code Shank Size Cutting Diameter
Metric
Cutting Diameter
Imperial
Cutting Height
Metric
Cutting Height
Imperial
Overall Length
Metric
SCD-032-Q 1/4in 3.2 1/8in 12.7 1/2in 50.8
SCD-040-Q 1/4in 4.0 5/32in 12.7 1/2in 50.8
SCD-048-Q 1/4in 4.8 3/16in 19.0 3/4in 50.8
SCD-064-Q 1/4in 6.4 1/4in 19.0 3/4in 50.8
SCD-064-XQ 1/4in 6.4 1/4in 25.4 1in 63.5

Size

  • 3.2mm Diameter x 12.7mm Cutting Height
  • 4.0mm Diameter x 12.7mm Cutting Height
  • 4.8mm Diameter x 19.0mm Cutting Height
  • 6.4mm Diameter x 19.0mm Cutting Height
  • 6.4mm Diameter x 25.4mm Cutting Height
View product