Milescraft Pocket Hole Jig200

  • Milescraft Pocket Hole Jig200 MC-1325

    Simple, Quick Precise Pocket Hole Jig

    The Milescraft PocketJig200 pocket hole jig allows you to connect your workpieces in a quick and timely manner. Whether you want to build storage projects, cabinets, shelves or bookcases, this kit does it all. Allowing you to create corner joints, T-Joints, Framing Joints, Mitre Joints and do repairs. With built-in settings for board thicknesses, there is no need to manually measure. Just set this pocket jig to your desired setting, set the depth of your bit and start drilling.

    PocketJig200 Pocket Hole Jig Kit – Designed to Make Repairs Simple

    Spring-loaded sled adjust button allows the jig to be set to do repairs of any nature around your home or your shop.

    Built-In Imperial and Metric Scales

    The built-in scales allow you to easily measure the thickness of your workpiece.

    Board Thickness Settings

    There are four common board thickness settings built into the pocket jig: 1/2”, 3/4”, 1” and 1-1/2” (12, 19, 27, 38mm). Easy readout arrow to help define your board thickness setting. Easily adjust to your board thickness setting with the single sled design and sled adjust button.

    Hardened Steel Drill Bushing

    For precise and accurate pocket holes every time using the Milescraft PocketBit. Tight tolerance between the bushings and the drill bit reduce tear-out and create a clean pocket hole first time.

    Recessed Clamp Pocket with Magnet

    Helps to keep the clamp in the same position as you move to different locations. With a strong rare earth magnet, you can easily clamp the jig from one location to another. For speed and accuracy use the Milescraft 76mm (3”) Face Frame Clamp.

    Convenient Built-In Depth Setting

    Easily set your bit for the correct drilling depth.

    Split Design Stop Collar with Flat

    The split design prevents slipping of the set screw when tightened and the flat prevents the bit from rolling. Includes a hex key for tightening.

    HSS Step Drill Bit

    Made from high-speed steel the PocketBit with 1/4″ hex shaft is designed to reduce clogging and provide smooth and precise holes.

    Quick Change Compatible Connector

    With the Milescraft Connector, you can quickly change from drilling to driving. Accepts all 1/4″ hex bits. Quickly and easily change from drilling to driving.

    3” And 6” Magnetic T20 Torx® Drivers

    For maximum torque settings without stripping. To allow pocket screws to align with maximum precision.

    Rugged Storage Case

    With designated places for components, you will never have to go digging through your toolbox for your pocket hole jig again. Storage compartment for 2″ FaceClamp. Storage slot for PocketJig100.

    Material Reinforced Nylon
    Drill Guide Bushing Spacing 25.4mm (1")
    Clamping Method Works with any clamp
    For use with Wood Materials for 12-38mm thick (1/2" to 1.5)
    Drilling Angle 15°
    Screw and Driver Style T20 Torx
    Screws 10 of each: 1” (25mm), 1.25” (32mm) coarse and fine, 1.5” (38mm), 2” (51mm), 2.5” (64mm)
    Drivers 3" T20 Magnetic Head Driver and 6" T20 Magnetic Head Driver
    Pocket Plugs 10 plugs
    Connector Accepts all 1/4" hex bits
    Drill Bit 3/8" (9.5mm) HSS Pocket Bit with 1/4" shank
    Includes Double Barrel Pocket Hole Jig, Quick Connect, 3" & 6" T-Star Driver Bits, 3/8" PocketBit, 60 Piece T20 Pocket Hole Screws, Pocket Plugs, 3/8" Split Design Stop Collar with Hex Key and Instruction Manual

     

    $59.90 (inc GST)
     

Product Video