Do you want premium sharpening results in record time? Then it’s time to check out Tormek. A complete, high quality sharpening system that produces super sharp results in a fraction of time compared to other sharpening methods. Perfect for the enthusiast and pro woodworker alike.
Made in Sweden, Tormek is fully focused on sharpening exporting to over 35 countries world-wide. Appreciated by cabinet makers, woodworkers, woodturners, outdoor enthusiasts as well as professional chefs, industrial kitchens and households. The Tormek sharpening system is simply the best and fastest sharpening system available.
Tormek Wetstone Grinder Diamond Wheel Extra Fine 1200 grit to suit T-4
Diamond grinding wheel for Tormek T-4. The DE-200 Diamond Wheel Extra Fine is the diamond wheel that provides an extra smooth finish and is especially suited for sharpening carving tools and knives with minimal steel removal needs. The grit size is 1200.
The DE-200 Diamond Wheel Extra Fine
- Diamond grinding wheel for Tormek T-4
- Provides an extra smooth finish
- Constant shape, always maintains the same diameter
- Sharpens all types of steel and ceramic
- Allows sharpening on the side of the grinding wheel to get a completely flat bevel
- Exceptional durability with diamond, the world's hardest abrasive
A grinding wheel for all materials
With this diamond wheel, you can sharpen nearly any type of material, including steel, ceramic and carbide. DE-200 Diamond Wheel Extra Fine fits Tormek T-4 Original, Tormek T-4 Bushcraft, Tormek T-3 and earlier models with a 200 mm diameter grinding wheel.
The DE-200 Diamond Wheel Extra Fine is especially appraised by woodcarvers and others who needs their bevels to have a mirror finish. If you need to create a new edge och change the bevel angle of your tool, we recommend you do that on a coarser grinding wheel at first, such as the DC-200 Diamond Wheel Coarse or DF-200 Diamond Wheel Fine. Then you can give the finishing touch with the DE-200 Diamond Wheel Extra Fine for a mirror polish.
Simplifies repeat sharpening
All of Tormek's diamond grinding wheels have exceptional durability with a constant removal rate and shape, which means that they always stay round and flat with a full-size diameter. Users who often sharpen the same tool benefit greatly from this, as it simplifies both setting up and sharpening.
Get a completely flat bevel
The constant shape makes it possible to grind either on the side of the wheel or on its upper surface. Side grinding is perfect for smaller tools such as knives, chisels, carving gouges and v-tools. The result is an edge with a completely flat bevel, instead of a slight hollow grind.
For sharpening on the side of the diamond wheels, we recommend using the MB-100 Multi Base together with the jig designed for your specific tool. Both the base and the jigs give you support and control throughout the sharpening process. If you're not sure which jig you should use, find out here.
Rust protection for increased service life
All diamond wheels are supplied with 150 ml of ACC-150 Anti-Corrosion Concentrate. Always add the concentrate to the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml of concentrate to 250 ml water (~4 %). We recommend always using water when sharpening diamond wheels, as it both prolongs the life of the wheel and provides a smoother grinding surface. It is also possible to sharpen without water. Learn more about sharpening with diamond grinding wheels.
Who is Tormek
Well-grounded in the Swedish tradition of advanced innovation, functionality and quality, Tormek has developed a unique sharpening system that has come to set a standard in modern edge tool sharpening around the globe.