Bottom Cut Straight Two-Fluted Router Bits
Please note. The cutters on both sides do not overlap. This is to allow of clean waste removal when plunging. This means that in a router this will not be an issue. However this may be a problem for CNCs and due to this we do not recommend these bits for CNCs. Please use a Torquata spiral bit for CNC plunge cuts.
These bits offer that improved performance for only a small cost.
Bits 16.0mm diameter and above have a downshear angle for improved chip injection and smooth cut finish.
Straight bits are the most versatile bits and can be used for trenching, grooving, trimming and rebating either hand-held with a guide or in a router table. All Torquata straight bits are twin-fluted for a better-finished edge and long life.
Product Code |
Shank Size |
Cutting Diameter Metric |
Cutting Diameter Imp'l |
Cutting Height Metric |
Cutting Height Imp'l |
Overall Length |
SE-060-H |
1/2in |
6.0 |
15/64in |
25.0 |
N/A |
67.0 |
SE-064-H |
1/2in |
6.4 |
1/4in |
25.4 |
1in |
67.9 |
SE-079-H |
1/2in |
7.9 |
5/16in |
25.4 |
1in |
67.9 |
SE-095-H |
1/2in |
9.5 |
3/8in |
25.4 |
1in |
67.9 |
SE-100-H |
1/2in |
10.0 |
N/A |
32.0 |
N/A |
73.0 |
SE-120-H |
1/2in |
12.0 |
N/A |
32.0 |
N/A |
73.0 |
SE-127-H |
1/2in |
12.7 |
1/2in |
31.8 |
1 1/4in |
73.5 |
SE-127-XH |
1/2in |
12.7 |
1/2in |
50.8 |
2in |
88.9 |
SE-130-XH |
1/2in |
13.0 |
N/A |
50.0 |
N/A |
92.7 |
SE-143-H |
1/2in |
14.3 |
9/16in |
31.8 |
1 1/4in |
73.0 |
SE-160-H |
1/2in |
16.0 |
N/A |
32.0 |
N/A |
73.0 |
SE-160-XH |
1/2in |
16.0 |
N/A |
51 |
N/A |
67 |
SE-170-H |
1/2in |
17.0 |
N/A |
32.0 |
N/A |
73.0 |
SE-180-H |
1/2in |
18.0 |
N/A |
32.0 |
N/A |
73.0 |
SE-180-XH |
1/2in |
18.0 |
N/A |
51.0 |
N/A |
89.0 |
SE-190-H |
1/2in |
19.0 |
3/4in |
31.8 |
1 1/4in |
73.5 |
SE-250-H |
1/2in |
25.0 |
N/A |
32.0 |
N/A |
73.0 |
SE-254-H |
1/2in |
25.4 |
1in |
31.8 |
1 1/4in |
73.0 |