Welcome to the in-DEXABLE Family (in metric!)
This kit includes metric 150mm, 300mm and 450mm length blades, all of which fit all four heads, as well as the XL Combination and XL Double Square heads.
This product is part of the in-DEXABLE family, and is able to be interchanged with the: in-DEXABLE Blades, XL Double Square Head and XL Combination Square Head.
Woodpeckers built features into the in-DEXABLE Combination Squares that you won’t find in any other combination square. Features like laser-accurate scribing guides, positive indexing at every full inch, a sliding head support and accurate, laser-engraved scales.
Thoughtful Design and a Systematic Approach
Two features stand out when you compare Woodpeckers in-DEXABLES with any other combination square. First, you’ll notice the scribing guides laser-cut on 1mm centres. They’re sized and shaped to guide any marking device perfectly parallel to the edge of your stock. To give the scribing guides an accurate starting point, the round holes in the centre of the blade index the heads to the closest full inch. The scales are laser-engraved to an accuracy of ±.004in with 1mm graduations and heads that lock every 30mm.
Combination Square Head: Woodworking’s Two Most Important Angles 90° and 45°
Everything you build involves one or both of these angles over and over again. The genius of the combination square is having both of them in your hand, all the time. Woodpeckers adds a new feature to the classic design with a sliding tab that supports the head while it’s hanging off the edge of your work.
Double Square Head: Square Inside, Outside, Right or Left
Everything you build involves one or both of these angles over and over again. The genius of the combination square is having both of them in your hand, all the time. Woodpeckers adds new features and larger references to the classic combination square design in the in-DEXABLE XL model. There’s a tab that slides out of the head and supports it flush with the surface of your material. The head is a full inch thick, which gives you a depth of just under 12.7mm, more than enough to reach past most moulded edges. The XL head also has a full 127mm reference surface.
Protractor Head: Laser-Engraved Scale for All Angles and Positive Stops for Standards
When your projects get a bit more complicated, and call for angles other than 45°, the new in-DEXABLE Protractor head will be a welcome addition to your shop. The smooth-turning protractor can be adjusted to any angle between 0° and 90° both right and left. There’s an alignment pin that indexes to the edge of the blade for fast, accurate registration of standard angles (22.5°, 45°, 67.5° and 90°). All other angles are easily set to the high-contrast laser-engraved scale.
Two large locking knobs and an 200mm long reference edge give you confidence in your angle layout. When you’re working straight and square, the Protractor is still a welcome partner in your shop. When locked square, it’s a handy T-square with built-in scribing guides.
Centering Head: Find the Centre of any Round or Square Stock
The Centering Head holds the blade at a 45° angle relative to machined 90° surfaces. Marking the two diagonals of a square locates centre. It’s even easier to find the centre of a circle. Just hold the Centering Head against the circle in any two different spots and strike a line across the diameter. The intersection is the dead-centre of your circle. Opposite the 90° centring guides, the back side of the Centering Head locks in with the indexing feature so you can scribe without changing heads.
The Rack-It is a handy storage mount designed keep your Woodpeckers tools neatly wall-mounted for easy access.
Like all Woodpeckers products, all produccts in the in-DEXABLE range are precisely machined and carefully inspected in Woodpecker’s Strongsville, Ohio factory (just south of Cleveland).
Please note: although products are metric, the photos may depict imperial versions.