Catalogue - Planing - Planer Machine Accessories

Home / Planing / Planer Machine Accessories

Products: 1 - 7 of 7

Deluxe Blade Setting Jig - BSJ-02
Suitable for all types of jointers and thicknessers. Simply adjust the jigs for the correct diameter cutterhead and length of extrusion of the blade from the cutterhead. Put your planer knives into the cutterhead and set the jig over the planer blade. Two rare-earth magnets hold the jig onto the cutterhead whilst pressure is being applied to the knives for tightening the clamping bar. Allows perfect setting of blaeds on any type of cutterhead.

Long Push Block - PB-10
Usually push blocks are used as a pair, so this push block should suit these applications by putting two push blocks in your hand – without ever having to lose the second one in saw dust again! The base measures 400mm long (vs. 150mm for 1x PS-2 push block) and it measures 70mm wide. Shaped like a hand plane, it is comfortable to use and works well at applying even pressure.

Deluxe Blade Setting Jig & Magnetic Parts Tray - BSJ-02-MPT-100
Suitable for all types of jointers and thicknessers. Simply adjust the jigs for the correct diameter cutterhead and length of extrusion of the blade from the cutterhead. Put your planer knives into the cutterhead and set the jig over the planer blade. Two rare-earth magnets hold the jig onto the cutterhead whilst pressure is being applied to the knives for tightening the clamping bar. Allows perfect setting of blaeds on any type of cutterhead. Packaged with a Magnetic Parts Tray so you do not l

Blade Setting Jig & Magnetic Parts Tray - BSJ-01-MPT-100
A simple but very effective tool for setting jointer knives. Six rare-earth magnets are mounted in the twin arms. Simply put your planer knives in the cutterhead, place the jig on the outfeed table and engage two of the magnets with the planer knives and tighten. Rotate the cutterhead and repeat. Packaged with a Magnetic Parts Tray so you do not loose your nuts, bolts and springs when changing blades.

Blade Setting Jig - BSJ-01
A simple but very effective tool for setting jointer knives. Six rare-earth magnets are mounted in the twin arms. Simply put your planer knives in the cutterhead, place the jig on the outfeed table and engage two of the magnets with the planer knives and tighten. Rotate the cutterhead and repeat.

Paraffin Wax - PW-250
Why is this in the planer blade accessories? Well it is a wax but not a finishing wax. Paraffin is the base product for candles, but in its purest form it is the best form of lubricant for planers to ensure the timber slides smoothly over cast-iron surfaces. It comes in a big 200g hard wax cake that lasts for AGES and never goes off. Just rub it over the surface you're planing on and you'll see the difference. It also doesn't mark the timber. Can be used on router tables, table saws, etc.

Friction-Type Push Block - PS-2
Made of durable ABS blow-moulded plastic and a synthetic non-slip rubber on the base, this 150x75mm push block makes sawing, routing and planing operations safer than ever before. Keeps your fingers between you and the workpiece. Sold individually.

Home

Back

Timbecon PTY LTD
Pay by phone using Credit Card, Direct Debit, Cheque
Phone Sales: 1300 880 996 - 7.00am - 5.30pm (WST)

Site best viewed 1024x768 using Internet Explorer 6 or Mozilla Firefox 1.0, with cookies enabled and pop-up software disabled.

Problems with the site? Email: webmaster@timbecon.com.au