When you know you're going to be turning for a long time but not sure where to start with chisels - this is a great set to buy! You get the Crown Cryogenic quality blades with comfortable, stained ash handles in an attractive and useful card storage box. The set consists of the following five common chisels -
- 19mm roughing gouge
- 10mm spindle gouge
- 6mm parting tool
- 13mm round nose scraper
- 13mm skew chisel
About Crown Cryogenic Steel
The Crown Cryogenic range are high quality turning tools with a difference. Using cryogenically treated tools means that now you can turn more and sharpen less often. The tools are made from M2 Steel that are heat treated normally then taken down to temperatures as low as -185°C which changes the molecular structure of the steel.
The two main crystals in tooling steel are the larger and softer austenite and the smaller, more stable martensite. Normal heat treatment seeks to transform the austenite to martensite to produce steel with good wear characteristics and an amount of ductile properties.
The cryogenic process greatly enhances and accelerates the austenic transformation. Another benefit is that at these extreme temperatures, fine ‘eta’ carbides are formed within the carbon structure. Growing very slowly and only at these very low temperatures, ‘eta’ carbides are extremely small and act as a ‘filler’ between the other crystals in the metal.
The combined effect of heat treatment and cryogenic processing is to produce a refined crystal structure in your hand tool that will give a lifetime’s service by producing a blade that will retain its edge longer and give a superior ‘feel’ in use.
All Crown Cryogenic Turning Tools are finished with beautiful black Ash handles.