Easy Finishers

  • On Sale

    Easy Finishers

    See these amazing tools in action! Watch our in-house videos, above! 

    With another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for inside work on smaller bowls and larger coves on spindle work. The carbide inserts are manufactured in the USA. 

    Like the other Easy Wood tools, Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts. It does not get any easier than that! There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the centre of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut - coming and going until you get to the shape you want. Watch the video below or on our Youtube channel to see that in action.

    The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

    When the cutter eventually gets dull, just loosen the retaining screw,  rotate cutter about 1/4 of a turn and then re-tighten the screw.

    We promise this tool will open up a whole new level of design possibilities for your craft and exceed your expectations. 

    The replacement Genuine EWT Carbide Cutter number is engraved right on the top of all stainless steel tool bars.

    The handles are produced from American Rock Maple and stained maroon so are easily identified as the roughing tools, with a copper rather than brass ferrule and the laser-cut stainless-steel bar means that you never have to worry about your tools rusting ever again. The micro, mini and midi rougher have 9.5mm (3/8in) bars while the full and pro-size tools have 12.7mm (1/2in) bar.

    Easy Finisher - Yet Another Innovation in Woodturning

    Micro Finisher - 82mm Blade | 150mm Handle
    EWT-12011
    $135.00 (inc GST)
    Mini Finisher - 102mm Blade | 305mm Handle
    EWT-6200
    $149.00 (inc GST)
    $149.00
    Midi Finisher - 175mm Blade | 355mm Handle
    EWT-6300
    $179.00 (inc GST)
    $179.00
    Full Size Finisher - 215mm Blade | 405mm Handle
    EWT-4200
    $209.00 (inc GST)
    $209.00
    Pro Finisher - 215mm Blade | 510mm Handle
    EWT-3400
    $235.00 (inc GST)
    $235.00
     
  • delivery icon Standard delivery within Australia is 3 to 5 days.
  • pickup icon FREE pickup from our Perth or Melbourne stores

Product Video