Veritas 3-in-1 Brass Marking Gauge

  • Veritas 3-in-1 Brass Marking Gauge 05-N-6501

    Veritas 3-in-1 Brass Marking Gauge

    This elegant marking gauge is really three tools in one — a wheel gauge, a pin gauge, and a cutting gauge.

    The unique swivelling pin/blade chuck takes either a pin or a blade that locks in place (after the extension is set) using a set screw in the end of the 115mm gauge stem. The cutting blade can be set for either right- or left-handed use. The opposite end of the stem is tapped to accept a 9.5mm diameter wheel cutter.

    The fence and the internal portion of the locking collet are a single eccentric brass turning. The collet fingers have just enough stem friction to hold a projection setting while you lock it in place with a half turn of the knurled locking sleeve. The 25.4mm diameter fence is eccentric to maximise rub depth. A side benefit is that it also prevents the gauge from rolling off the workbench.

    Comes complete with a dozen spare blades, two hardened steel pins, a wheel cutter and screw, and a hex key.

    $68.90 (inc GST)
     

Product Video