The Torquata Power Tool Guide (PTG) 90 Degree Head turns your PTG Quick Clamp into a T-square. Use this accessory to produce perfect square crosscuts super quickly. Use as an oversized T-square for setting out. Great for the enthusiast or professional woodworker alike.
Machining or drawing straight 90-degree lines using a straight edge is not hard. Yet having to constantly check your setup using an engineer’s square or measuring tape can be time consuming. It can also be the source of inaccuracies and errors. Forget that. You need a purpose made guide that is versatile, easy to use and quick to set up. Welcome the Torquata PTG with Quick Clamp upgraded with a 90 Degree Head.
Key Features
- Ensures the PTG Quick Clamp is always square to the work
- Greatly reduces setup time
- Increases versatility of guide clamp
- Turns a PTG Quick Clamp into a T-square
- Tough durable reinforced moulding
- Fixing screws supplied
How does it work?
The 90 Degree Head fits around the PTG Quick Clamp fixed clamp head. The lugs on the moulding fit into the alloy rail extrusion to ensure correct alignment and are fastened securely with two self-tapping screws. Attaching the 90 Degree Head greatly reduces the time taken to set up a square crosscut and turns the guide clamp into a large square for marking out. The body is a strong glass fibre reinforced ABS moulding with a 175mm long face, 12mm deep. The textured face prevents slippage. For increased precision, align with an engineer’s square before clamping.
Why do I need this?
Attaching the 90 Degree Head to your PTG Quick Clamp greatly cuts the time taken to set up a square crosscut. It also adds another function to your the PTG Quick Clamp as a large square for marking out. Increase accuracy and efficiency in your work with the Torquata PTG 90 Degree Head.
A Complete System
The Torquata PTG Quick Clamp and its range of accessories are a complete system designed to enhance your woodworking. Review the whole range products available on the “A Complete System” tab.
100% made in Taiwan
Your Torquata PTG Quick Clamp and accessories are 100% made in Taiwan. Equipment built in Taiwan is of the highest standard and the go-to choice for premium woodworking brands around the world.
The Torquata Power Guide offers you as complete system. Check out this range of options for you to create the most versatile of workshop assistants.
Power Tool Guide (PTG) Quick Clamp - 24in PTG-24-T, 50in PTG-50-T
The PTG Quick clamp is the heart of this system. Available in two sizes, 24in (610mm) and 50in (1270mm). Choose your preferred option from the dropdown menu above.
Cut smooth, straight, clean lines with the PTG Traveller base plate fixed to your circular saw or router. The Traveller then attaches directly to your PTG Quick Clamp. You can leave the Traveller attached to your power tool for free hand cutting.
The 180mm long handle extender fits to the Quick Clamp fixing handle. This extension gives you better leverage to operate the clamp when more clamping pressure is required.
Turn your PTG Quick Clamp into a T-square. The 90 Degree head fixes around the Quick Clamp’s fixed clamp head. Attaching the 90 Degree head greatly reduces the time taken to set up a square crosscut and turns the guide clamp into a large square for marking out.
More clamping surface area means clamping stability and power. Great for wide or thick stock, reduces marring on soft materials. The wide jaws fit securely to the Quick Clamp head fixed by two wood screws that are included in the kit.
These adaptors join two PTG Quick Clamps back-to-back. This creates a holding device to grip panels of sheet material across the top of your bench. The lower clamp grips your bench, while the upper clamp holds the workpiece. Adaptors supplied as a pack of 8.
Attach any two PTG Quick Clamps to create your own wide body back-to-back clamp. Secure the bottom clamp to the bench, secure your piece with the top clamp and you are ready to work. Sanding, gluing and routing are made much easier.
Use this hardware kit to build your own custom jigs and fixtures for your PTG Quick Grip clamp. Designed primarily to work in the T-slot of the clamp.