Important Shipping Information
Due to the length of 50in (1270mm) guide - you cannot select Australia Post or Startrack Priority as a delivery option as they cannot accept products that are this big (even if it is shown in the Checkout on the website). 50in guides must be shipped using Border Express so please select this option in the Checkout. The 24in (610mm) guide and other accessories can be shipped on any carrier when ordered without the 50in guide included.
When cutting panel product using a saw or router, most people muck around with a straight edge and two clamps, wasting time making sure its square and fixed in place and then the clamps get in the way anyway!
The Baladonia power tool guide is a low-profile tool guide with a built-in cam clamp that sits under the board and out of the way. The jaws automatically pull the guide close to square (with slight adjustment from aligning with a try-square) and can be quickly clamped in place and removed within seconds.
If you want to make sure the cut is accurate, square and repeatable make the small investment in the 300mm guide traveller. Cut and drill a 12mm MDF base to bolt your power tool in place and then mount to the traveller using the included bolts and knobs. Then run the traveller in the captive groove for maximum accuracy.
Want to see the guide rail in action with a traveller? See our YouTube video below!