Sherwood Router Table Overhead Dust Collection Arm

  • Sherwood Router Table Overhead Dust Collection Arm RT-810-OHG

    Do you do a bit of template routing? Do you need a dust collection solution for your router table setup that is not constantly in the way or in the wrong position? If so, then check Router Table Overhead Dust Collection Arm from Sherwood. Perfect for anyone who wants to template route dust free and uninhibited.

    The Sherwood Router Table Overhead Dust Collection Arm fixes to any conventional router table. And provides an easy to adjust overhead ducting and blade shield solution for your router table. This dust collection arm is perfect for those completing template routing tasks such as making chair and furniture components. It is easy to install and adjust.

    Uninhibited routing

    This overhead dust arm allows the clear Perspex blade shield to be suspended directly above the router bit. As a result, you now have an uninhibited router table worksurface. This setup is perfect for safely machining templated panels and other shaped forms while still maintaining effective dust control. The Perspex shield can be lowered down to just above your piece, or to a height of 120mm off the router table surface.

    Assembly

    The Sherwood Router Table Overhead Dust Collection Arm fixes to any conventional router table. The fixing plate is secured to the rear horizontal rail of your router table stand by two M6 cap screws. The vertical arm slides into the fixing plate and secures by a hand knob. The vertical arm features a ducting clamp to hold the 62mm steel ducting in position. The Perspex blade shield slots into the ducting and is easily positioned above the router bit. Attach spiral ducting from your extraction system and off you go.

    Features and benefits

    • Fits to any conventional router table
    • Tough, clear Perspex blade shield for high visibility
    • Substantial 62mm ducting for effective suction
    • Long arm 600mm (effective length) horizontal arm for extra reach
    • Quality, heavy-duty build - no chance of sagging

    What’s in the box

    • 1 x clear Perspex blade shield 105 in diameter
    • 1 x 62mm steel ducting arm with elbow (330 x 650mm right angle)
    • 1 x vertical fixing arm with ducting clamp 350mm long
    • Fixing plate and hand knob
    • Hardware pack
    • Basic instructions

    5-Year warranty

    All Sherwood products feature a standard 5-Year limited warranty. No other brand of machinery or machinery accessories are more supported than Sherwood.

    $199.00 (inc GST)
     

Product Video