Sherwood Belt & Disc Sanders are versatile, efficient shaping tools that belong in every workshop, from the serious enthusiast to the professional woodworker.
The belt & disc sander is the fastest way to accurately shape and sand smaller parts. When fitted with 60 or 80 grit abrasive they remove material rapidly and make short work of shaping tasks in a variety of materials. With higher grit sandpaper they perform tricky finishing operations with ease.
Powerful
With 1.5HP directly driven into the belt and disc, the SBD-612-CS is able to get your workpiece to the pencil line in super-fast time. Whether you are working in softwoods or the hardest of Australian hardwoods, or even bone, acrylic or plastics, you’ll power through with a minimum of fuss.
Accurate
The work tables are flat, smooth and easy to adjust, allowing you to achieve specific angles on your workpiece with perfect repeatability. Both tables have 20mm mitre channels providing stable platform for sliding jigs and mitre guides.
Flexible
Rotating the belt from the horizontal position to the vertical position lets you square and trim end grain with stability. The 12” disc provides a large surface with varying abrasive speeds, perfect for fiddly jobs where you need to creep up to a pencil mark.
Clean
Sanding creates a huge amount of fine dust, making dust collection a major priority in your workshop. The SBD-612-CS has twin extraction ports connected to snug-fitting manifolds, allowing you to direct the airflow to where it is needed most and minimising the dust nuisance.
5-Year Warranty
All Sherwood products feature a standard 5-Year limited warranty. No other belt & disc sander in its class is more supported than the Sherwood SBD-612-CS.
Versatility
The SBD-612-CS can be used for all sorts of shaping jobs, including:
- Flattening small parts
- Smoothing outside curves
- Squaring end grain
- Cleaning up mitres
- Sanding inside curves
Power
A 4 pole induction motor delivers a huge 1100 watts (1.5HP) through simultaneous direct drive to the belt and disc.
Accuracy
Work tables are rigidly mounted and will not move or flex. Each table can be adjusted from +20° to -45°, making an impressive total adjustability range of 65°.
Dust Ports
Two 40mm nominal dust ports give optimum connectivity for your extractor, collecting dust right at the source.
5-Year Warranty
All Sherwood products feature a standard 5-Year limited warranty. No other belt & disc sander in its class is more supported than the Sherwood SBD-612-CS.