Time to get industrial strength serious about dust extraction and this is the biggest and the best.
So you have looked at the other dust extractors and said "I want more!" Well here is the Tim the Tool-man Taylor grunt option for your dust extraction needs.
Getting a cyclone dust extractor is the professional solution of those looking to take their dust extraction to the next level. It is an investment in your time and the hope to avoid frustration. No one likes changing the bags on a dust extractor. Getting the clips and the straps to all work and then having to clean up as you inevitably rip the bad on the way to the bin and where you lose half the dust on the group. Well by fitting a cyclone in-line with the dust extraction, the cyclone removes the bulk of the debris and dust and dumps it into an easy to change drum before the dust hits the filter and waste bag. This means fewer changes of expensive cartridge filters and fewer changes of the waste bag. Because much of the dust is removed from the air before it hits the 1-micron filter meaning that the filter lasts longer and is able to keep the air quality of your workshop cleaner for much longer. As filters clog, extractor efficiency drops off, because cyclones keep your filter cleaner for longer, your efficiency remains higher for longer.
The whole unit is mounted on casters allowing it to be moved to where it is needed as well as the dust drum which is also on casters for quick and easy removal and emptying. This means you can have one unit for your entire workshop.
At 1700CFM (cubic feet per minute) the 2200W (3HP) motor provides exceptional suction. This unit has more than enough power to handle 2 machines at once through its three 100mm intakes or 200mm single intake.
Please note: We now offer this dust extractor with an optional upgrade in which we install an iVAC switch for you. Should you want this optional extra please select it from the drop-down menu. The standard listing does not include iVAC switch.
What is Low Maintenance Dust Extraction?
Using extractors in a production environment means a lot of dust and in the past has meant a fair bit of maintenance to operate efficiently. What you get moving to an Industrial model is less maintenance for it to perform close to peak efficiency - better chip separation in the cyclone, a more solid construction reducing noise, filters cleaned automatically with a servo motor on a timer, waste bins swapped out more easily and a pressure gauge to make sure its all working properly at a glance. We're keeping things simple so you have to think less about extraction system maintenance and more time working.
This unit is ideal for large-sized garage workshops and large-sized professional workshops.
Please Note: Due to the Rated Amp draw we recommend running this machine on a dedicated 20A (single-phase) circuit.
Fast Delivery, Australia Wide
While we keep our shipping costs as low as humanly possible, please note that due to the shipping weight of this machine, unless you have a forklift or other suitable means of offloading your machine at delivery, Australian shipping companies insist that a tailgate drop fee of $65.00 may need to be charged. Please see our Freight & Returns for more information.