SteelPro splitters greatly reduce the chance of kickback and virtually eliminate binding and burning.
Foolproof installation into your Zero Clearance insert (ZCI).
The precision drill guide aligns your drill perpendicular to the table saw surface so you can drill straight into your ZCI. It’s design directly lines up the splitter to your ZCI for accurate alignment with the blade. Installation is so simple, it’s foolproof.
The Micro Jig MJ SteelPro Splitters are available in two kerf sizes: the blue standard kit 3.2mm (1/8in) and orange thin kerf kit 2.28 -2.99mm (0.09in - 0.118in). The SteelPro Splitters come with 4 polymer-coated steel splitters. Mounting requires you have a minimum distance of 28.5mm (1 1/8in) from the back edge of the saw blade when fully raised to the end of the throat plate.
The toughest splitter ever. Work safer. Work smarter.
The MJ Splitter SteelPro has an ABS polymer shell reinforced with a solid stainless steel core. It’s able to take on the stress caused by many solid woods, greatly reduce the chance of kickback on your table saw, and virtually eliminate burning.
The toughest splitter ever, it utilizes the same patented technology of the original MJ Splitters.
Keeps your keeper piece square against the fence and automatically keeps your kerf.
The Automatic Kerf Keeper prevents the saw blade and splitter from binding while cutting hardwoods. When tension and pressure build, the Kerf Keeper is pulled out automatically by the closing kerf. The Kerf Keeper travels with the pinching kerf, and keeps it open reducing stress on the saw blade and splitter.
When you see the Kerf Keeper deploy, that’s your sign to turn off the table saw. Be alert. Be safe.
Use offset splitters to virtually eliminate kickback, binding, and burning.
Get precise and virtually burn-free results with the MJ Splitter's mini featherboard effect. Works while cutting materials such as MDF and plywood. Each side of the splitter is offset by several thousandths of an inch, giving you the the right amount of tolerance and pressure for your cut. Flip the splitter around so the + marking faces the fence to get the correct offset. Each + marking represents 0.08mm, so +++ equals 0.24mm. Precision and safety does come in small packages.