Can't find what you're looking for? We're here to help!
All items below are on special through to 30th September or until stocks last!
Please view products below or select from one of the following categories...
» View More
Try squares can be a problem in the workshop if they lose accuracy. The reason for this is either that the blade has been knocked or the timber in the handle has moved over time. This pocket size square overcomes the problem by allowing the blade to be adjusted, relative to the handle. This is done by two small screws found in the bottom of the handle. The square features a 3mm solid brass stock on the handle to protect it and a 2mm thick solid brass blade. 100mm long blade.
Dado’s are a great way of making trenching, grooving or rebating cuts into your work piece for production runs. The dado set included here has two 8in blades with 12 teeth at 1/8” (3.2) thick, and includes five chippers – 4x 1/8in (3.2mm) and 1x1/16” (1.6mm). This allows for dado’s 1/4” (6.4mm) – 22.2mm (7/8”) in 1/16” increments. 5/8" Arbor. Also included are shims to set the Dado effectively, an instruction card and a sturdy wooden storage/carry case.
<p>Choose from either the economical 9.5mm thick BakeLite (stabilized plastic) or the milled, super-flat 6mm anodized aluminium mounting plate. Both have rings marked on the underside to centre your router on the plate when mounting. Both plates measure 298x235mm.</p> <p>The BakeLite plate has a 99.5mm hole with two nested insert rings with 67.5mm and 32.2mm apertures.</p> <p>The aluminium plate has a 92.2mm hole with one twist-lock insert ring that has a 38.1mm aperture.</p> <p>Available separately is a set of four phenolic insert rings for the aluminium plate with apertures of 6.75, 12.9, 30.0 and 38.2mm as well as blank rings to drill out your own size.</p>
» View More
Timbecon Family Newsletter Signup to get the latest news and specials