These saws carry forward the same design principles used to develop the innovative dovetail saws, adopting selected traits of traditional carcass saws and rendering them using innovative materials and modern manufacturing methods.
Typically used to cut joints in drawer runners, dividers, and stretchers (the framework or carcass of a piece), they are well balanced, maneuverable, and scaled for smaller work than a tenon saw.
Available in rip and crosscut versions. The 12 tpi rip saw has a 10° rake angle and an included angle of 60° for efficient cutting parallel to the grain. The 14 tpi crosscut saw has a rake angle of 15°, an included angle of 60°, and teeth filed with alternating 15° bevels so they sever wood fibers rather than tear them. The teeth on each have relatively minimal set, at only 0.08mm per side.
Each saw has a molded spine that incorporates stainless-steel powder for weight, glass fiber for stiffness, and an advanced polymer binder. An over-molded blade and stainless-steel handle-mounting bolt create a solid blade/spine/mount assembly. A single brass fastener secures the wallaba handle. The open-grip handle, made larger than those of classic carcass saws, permits a comfortable, secure grip. The high-carbon steel blade, 280mm long and 0.5mm thick, has a cut depth of about 60mm. Each saw is 415mm long overall and weighs just under 450g. Offered individually or as a pair.