Torquata Mould & Trim Bits

Results 1 - 64 of 64 Show: Sort By:
  • On Sale

    1/2in Shank Straight Stair Tread Bit

    Stair tread bits are designed to remove large amounts of material in either planing, grooving or rebating operations with cutting blades running along the entire top edge of the bit and large cutaways for chip ejection.

    » View More

    From $24.90 May Sale! (inc GST)
    RRP: $31.00
     
  • 1/2in Shank Straight Twin Flute Router Bit

    Straight bits are the most versatile bits and can be used for trenching, grooving, trimming and rebating either hand-held with a guide or in a router table. All Baladonia straight bits are twin-fluted for a better-finished edge and long life. 

    » View More

    From $15.00 (inc GST)
     
  • 1/2in Shank Surface Planing Bit SP-500-H

    Timber slab planing with a router is popular due to size limitations and/or cost of large-capacity thicknessers. This bit is specifically designed for timber removal of Australian hardwoods with six shallow cutters and maximum chip ejection. 

    » View More

    $75.00 (inc GST)
    Out of Stock
     
  • 1/4in & 1/2in Shank Bottom Cut Straight Bits

    If you plunge with straight bits regularly you’ll know that performance can be improved by the addition of a third flute across the end of the bit. These bits offer that improved performance for only a small cost.

    Bits 16.0mm diameter and above have a downshear angle for improved chip injection and smooth cut finish.

    » View More

    From $20.00 (inc GST)
     
  • 1/4in Shank Straight Solid Carbide Router Bits

    All Torquata straight bits below 6.0mm diameter are solid carbide to improve cutting performance. Due to carbide’s brittle nature it is recommended that feed rates are significantly reduced.

    Solid Carbide Bits are not automatically covered by Torquata’s normal Five-Year Warranty against breakage.

    » View More

    From $19.00 (inc GST)
     
  • 1/4in Shank Straight Twin Flute Router Bits

    Straight bits are the most versatile bits and can be used for trenching, grooving, trimming and rebating either hand-held with a guide or in a router table. All Baladonia straight bits are twin-fluted for a better-finished edge. 

     

    » View More

    From $15.00 (inc GST)
     
  • Bead and Groove Plunge Router Bit

     

    Great for cutting fine grooves in timber or when used with a fence, it can be setup to create multiple beads across the timber in two different, common bead sizes.

    » View More

    From $16.00 (inc GST)
     
  • Bead Moulding Router Bit TB-032-BH

     

    Make your own reeded decking or finely fluted furniture using this versatile bit. Adjust the height to cut one, two or all three flutes in one pass.

    » View More

    $33.00 (inc GST)
     
  • Beaded Edge Groove Router Bit FB-048-BQ

     

    Designed to be used hand-held, this bit can be used to make a decorative edge trim or when run multiple times, it can create a unique, delicate edge bead on your work piece.

    » View More

    $32.00 (inc GST)
     
  • Beaded Edge Moulding Router Bit

     

    These bits are great for running a decorative bead along the edge of the timber and can create a full bead by turning the work piece 90° after the first pass.

    » View More

    From $39.00 (inc GST)
     
  • Bull Nose Moulding Router Bit

     

    Rather than running a roundover bit twice to create the perfect half-circle edge on a work piece, this bit allows you to do the cut in one pass with no extra machining required for the four most common timber thicknesses.

    » View More

    From $29.00 (inc GST)
     
  • Chamfer Moulding Router Bit

    Finish the edge of your work with an edge at a variety of angles from 15 – 45 degrees. Adjust the bit height to change the size of the chamfer on your work piece up to 32mm.

    » View More

    From $18.00 (inc GST)
     
  • Chamfer V-Groove Router Bit

     

    Designed to either cut grooves with 45° walls or, when used in conjunction with a router table and fence, these bits can also trim chamfered edges.

    » View More

    From $15.00 (inc GST)
     
  • Classical Moulding Router Bit

     

    Cut the timeless, classical edge pattern to a consistent, repeatable depth using this bit with the included guide bearing either hand-held or without needing a fence on a router table. 

    » View More

    From $29.00 (inc GST)
     
  • Classical Plunge Router Bit

    These bits are used to plunge-cut grooves for work pieces such as making dummy raised panel doors or in conjunction with a fence to cut the decorative classical edge pattern. 

    » View More

    From $22.00 (inc GST)
     
  • Classical Plunge Router Bit with Bearing

    These bits are handy for the same reason as the classical plunge router bits in that they can be used to cut grooves in a variety of work pieces with the added convenience of a top bearing guide. This means that they are easier to align with the use of a fence guide to get more accurate trench cuts. They can also be used to cut classical edge grooves as long as the height it set so that the bearing does not come in to contact with the workpiece.

    » View More

    From $34.00 (inc GST)
     
  • Core Box (Round Nose) Plunge Bits

     

    These bits are used to cut radiused grooves in timber for a variety of applications or edge trimming a cove when used in conjunction with a guide hand-held or in a router table.

    » View More

    From $14.00 (inc GST)
     
  • Cove Moulding Router Bit

     

    Cove bits cut perfect quarter-radius shapes with the bearing offering instant repeatability every time for a simple but attractive edge finish on tables, desks etc. 

    » View More

    From $18.00 (inc GST)
     
  • On Sale

    Crown Moulding Bit Profile #55 CM-55-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Crown Moulding Bit Profile #56 CM-56-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Crown Moulding Bit Profile #57 CM-57-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Crown Moulding Bit Profile #58 CM-58-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • On Sale

    Crown Moulding Bit Profile #59 CM-59-H

    Crown moulding bits can be used for cutting decorative cornices, skirtings or even for use decorating large projects. Shank Size = 1/2in, Cutting Diameter = 31.8mm, Cutting Length = 57.2mm.

    » View More

    May Sale! $59.00 (inc GST)
    RRP: $79.00
     
  • Dish Cutting Plunge Router Bit

     

    This Dish Cutter is perfect for forming shallow depressions with radiused corners in all types of timber for a variety of different applications.

    » View More

    From $27.00 (inc GST)
     
  • Edge Combination Trimmer Router Bit

     

    These bits make fast work of trimming up laminate edges in hand-held trimmers and can either be used to trim square or, when set to the correct depth, with a small chamfer to eliminate sharp edges.

    » View More

    From $15.00 (inc GST)
     
  • Edge Solid Carbide Trimmer Router Bits

    Single-fluted solid carbide trimmer bits with in-built guide are perfect for trimming laminates and veneers from substrate. Available with either a straight flush or popular 7° edge.

    » View More

    From $17.00 (inc GST)
     
  • On Sale

    Face Moulding Router Bit #1 FM-01-BH

    Create your own decorative mouldings for architraves, skirtings, picture frames and cover beads with this face moulding cutter. To get a quality cut it is essential to fix the router into a router table and run the timber against a substantial fence - so you can use the timber by holding it against the fence using feather-boards. 1/2in shank, Cutter depth = 5.6mm, Cutter length = 34.9mm

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $44.00
     
  • On Sale

    Face Moulding Router Bit #2 FM-02-BH

     

    Face-moulding bits create the most common and attractive architrave and door frame edge shapes used in carpentry. They are also handy for creating picture frame profiles and a multitude of other applications where a shallow but wide decorative profile would be suitable.

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $50.00
     
  • On Sale

    Face Moulding Router Bit #3 FM-03-BH

    Face-moulding bits create the most common and attractive architrave and door frame edge shapes used in carpentry. They are also handy for creating picture frame profiles and a multitude of other applications where a shallow but wide decorative profile would be suitable.

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $50.00
     
  • On Sale

    Face Moulding Router Bit #4 FM-04-BH

    Create your own decorative mouldings for architraves, skirtings, picture frames and cover beads with this face moulding cutter. To get a quality cut it is essential to fix the router into a router table and run the timber against a substantial fence - so you can the timber by holding it against the fence using feather-boards. 1/2in shank, Cutter depth = 6.4mm, Cutter length = 34.9mm

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $50.00
     
  • On Sale

    Face Moulding Router Bit #5 FM-05-BH

    Face-moulding bits create the most common and attractive architrave and door frame edge shapes used in carpentry. They are also handy for creating picture frame profiles and a multitude of other applications where a shallow but wide decorative profile would be suitable.

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $50.00
     
  • On Sale

    Face Moulding Router Bit #6 FM-06-BH

    Create your own decorative mouldings for architraves, skirtings, picture frames and cover beads with this face moulding cutter. To get a quality cut it is essential to fix the router into a router table and run the timber against a substantial fence - so you can the timber by holding it against the fence using feather-boards. 1/2in shank, Cutter depth = 12.7mm, Cutter length = 38.1mm

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $58.00
     
  • On Sale

    Face Moulding Router Bit #8 FM-08-BH

    Face-moulding bits create the most common and attractive architrave and door frame edge shapes used in carpentry. They are also handy for creating picture frame profiles and a multitude of other applications where a shallow but wide decorative profile would be suitable.

    » View More

    May Sale! $40.00 (inc GST)
    RRP: $58.00
     
  • On Sale

    Face Moulding Router Bit Set FMSET-07-H

    For the greatest freedom of choice of face moulding bits in the Australian market today for a gret price, you can't go past the face mould set. The set includes the four common face moulding bits as well as three more that are not readily available so you can choose from some unique profiles. Great as a gift for those who have almost everything.

    » View More

    May Sale! $199.00 (inc GST)
    RRP: $249.00
     
  • On Sale

    Finger Pull & Window Sill Router Bits

    From $36.00 May Sale! (inc GST)
    RRP: $45.00
     
  • On Sale

    Finger Pull Router Bits

    From $28.00 May Sale! (inc GST)
    RRP: $35.00
     
  • Flush Heavy-Duty Dual Bearing Trimming Router Bits

    Also available is the heavy-duty flush trimming bits with bottom as well as top bearing guides that make it easier to use in just about any trimming application, whether you need to locate your template top or bottom on the work piece.

    » View More

    From $35.00 (inc GST)
     
  • Flush Heavy-Duty Trimming Router Bits

     

    The heavy-duty trimming bits are larger diameter and use thicker carbide tips to remove more material quickly. With a negative shear on the blade they provide a smoother finish on timber edges than standard trimming bits.

    » View More

    From $29.00 (inc GST)
     
  • Flush Panel Pilot Plunge Router Bits

    The v-shaped pilot quickly drills through any material with the smooth face that runs along the material beneath to act as the template for cutting the material above it. Perfect for sink, window cut-outs etc. in a variety of materials such as plywood, plasterboard etc.

    1/4in shank bit is single-fluted for faster material removal.

    » View More

    From $15.00 (inc GST)
     
  • Flush Pattern Following Router Bit

     

    Pattern following bits are perfect for following patterns when used in a hand-held router application if the template is located on top of the timber or in a router table when the template is located at the bottom of the work piece. 

    » View More

    From $21.00 (inc GST)
     
  • Flush Standard Trimming Router Bits

     

    Flush trim bits are perfect for removing excess material once timber or laminates have been jointed or for duplicating the same pattern when used in conjunction with a master template across multiple work pieces.

    » View More

    From $17.00 (inc GST)
     
  • Flush Trim Router Bit Kit 5-Piece FTRBKIT-1

    $119.00 (inc GST)
     
  • Flush Trim Spiral Router Bits

    From $99.00 (inc GST)
     
  • Flush Ultimate Trimming Router Bits

    We are pleased to introduce the world’s first triple-blade downshear flush trim bit. Coming in at 22.2mm diameter it is designed to provide the ultimate finish on all materials with minimal chatter due to the bit body absorbing most vibration.

    Due to the extra blade, there are 50% more cuts per inch, creating the smoother, cleaner result as well as staying sharper for 50% longer than standard flush trim bits. As the blades are downshear, one blade stays in contact with the work piece for virtually the whole time, coming close to performing like a spiral bit for a fraction of the cost.

    The bits are only available with a ½in shank and can be bought with standard top bearing guide only or bearing mounted both top and bottom so it can be used in all flush trimming operations. 

    » View More

    From $50.00 (inc GST)
     
  • Flush V-Groove Trimming Router Bits

    When you need to hide a joint that’s less than perfect, use the v-groove flush trim bit to cut a V recess over the jointed edge. Also great for adding a sharp detail close to the edge of work pieces.

    » View More

    From $27.00 (inc GST)
     
  • Keyhole Plunge Router Bit

    Plunge and groove into the workpiece to create a recess for hanging hooks or run a groove through the workpiece to create a trench that can be used to capture either 4mm or 6mm nuts or bolt heads (when using KH095Q or KH127Q bits respectively).

    » View More

    From $15.00 (inc GST)
     
  • Keyhole Slatwall Plunge Router Bits SW-296-H

    Slatwall is a popular method of fitting out showrooms and now you can run your own slot in any board to fit the aluminium profile and custom-build your own shop fittings. 

    » View More

    $33.00 (inc GST)
     
  • Laserpoint Plunge Router Bit LP-151-Q

    Designed specifically for fine decorative detail routing, this bit is made of solid-carbide with multiple ejection flutes to create perfect engraving patterns on timber.

    » View More

    $44.00 (inc GST)
     
  • Mortice Plunge Router Bits

     

    Mortising bits are designed specifically for routing out recesses. With profiles designed for maximum stock removal and chip injection they are very handy for clearing out material.

    Pairing up a mortising bit with bearing guide improves repeatability by allowing you to follow a template – perfect for mortising multiple hinges or any other recess.

    » View More

    From $17.00 (inc GST)
     
  • Multi-Profile Bits

    The possibilities are limitless with this multi-profile bit. Adjust the height to use a different part of the cutter and make your own unique edge mouldings. Available in 1/4 and 1/2in shanks to suit all size projects. S = Shank size, D = Diameter, H = Height (cutting)

    » View More

    From $54.00 (inc GST)
     
  • Ogee Moulding Router Bit

     

    Ogee profiles have been used since ancient times and these bits are perfect for creating a traditional edge profile to suit a variety of timber thicknesses.

    » View More

    From $29.00 (inc GST)
     
  • Rebate Moulding Router Bit

     

    With a guide bearing that automatically sets the cutting depth, these bits are easy to use for creating an accurate rebate depth consistently.

    » View More

    From $20.00 (inc GST)
     
  • Roman Ogee Moulding Router Bits

    Roman ogee profiles create a similar edge to the standard ogee bit however rather than creating a wide, flat profile, roman ogee profiles create a taller, thinner profile on the work piece visually increasing the thickness of the edge. 

    » View More

    From $29.00 (inc GST)
     
  • Round Over Adjustable Moulding Bit ARO-380-BH

    The cutters on this bit can be configured to give either 1/4in or 3/16in radius options for smaller or larger jobs. The minimum and maximum cuts are: for 3/16in radius - wood 3/8 - 1 3/8in; for 1/4in radius - wood 1/2 - 1 1/2in. The spacers can be adjusted to roundover both the top and bottom corners of the work piece at the same time. 1/2in shank.

    » View More

    $65.00 (inc GST)
     
  • Round Over Moulding Router Bit

     

    Easily the most popular and timeless edge trimming option for almost every timber project. Use a small radius in a hand-held trimmer to quickly and easily remove sharp edges on a well-planed table or put a simple, clean curved edge using larger sizes. You can also use in conjunction with the same radius cove moulding bit and you can fit together panels on a drop-side table. 

    All  round over bits come with an included bearing which, when changed with the standard bearing, will create a beaded profile (B).

    » View More

    From $20.00 (inc GST)
     
  • Slot Cutter Router Bit Arbor

    Designed to be used with Baladonia and most popular slot cutters on the market, all Baladonia arbors are CNC machined and balanced for smooth operation in routers.

    » View More

    From $14.00 (inc GST)
     
  • Slot Cutter Router Bit Assemblies

    Use slot cutters for cutting grooves, trenches and shallow rebates quickly and easily into the edge or face of timber for a variety of applications. You can stack multiple slot cutters on top of each other to increase the cutting height. Biscuit jointing is a simple, effective and strong method of jointing two boards. Simply cut a slot in the timber 4mm thick, squirt some glue and put the biscuit in on one side and you can quickly and effectively locate two work pieces when jointing. The bearing is designed to cut to the depth of the popular #20 Lamello biscuit size. 

    » View More

    From $35.00 (inc GST)
     
  • Slot Cutter Router Bit Blade

     

    Use slot cutters for cutting grooves, trenches and shallow rebates quickly and easily into the edge or face of timber for a variety of applications. You can stack multiple slot cutters on top of each other to increase the cutting height. All slot cutters are four-bladed for the fastest and most efficient cut.

    » View More

    From $22.00 (inc GST)
     
  • Table Edge Moulding Bit #1 TE-01-BH

     

    Kitchen and dining tables usually have large, sweeping flat surfaces and these bits have been designed to complement this surface by creating a range of large, sweeping curved edges to suit. 

    » View More

    $32.00 (inc GST)
     
  • Table Edge Moulding Bit #2 TE-02-BH

    Kitchen and dining tables usually have large, sweeping flat surfaces and these bits have been designed to complement this surface by creating a range of large, sweeping curved edges to suit. 

    » View More

    $72.00 (inc GST)
     
  • Table Edge Moulding Bit #3 TE-03-BH

    Kitchen and dining tables usually have large, sweeping flat surfaces and these bits have been designed to complement this surface by creating a range of large, sweeping curved edges to suit. 

    » View More

    $72.00 (inc GST)
     
  • Table Edge Moulding Bit #4 TE-04-BH

    Kitchen and dining tables usually have large, sweeping flat surfaces and these bits have been designed to complement this surface by creating a range of large, sweeping curved edges to suit. 

    » View More

    $72.00 (inc GST)
     
Results 1 - 64 of 64 Show: Sort By: