Butterfly Key Spline Bit

  • Butterfly Key Spline Bit BKS-286-H

    A butterfly key spline bit allows you to make strong loose tennon joints that are either hidden or can be used decoratively - such as butt joints on end-grain, as tray legs or even a simple chopstick stand. It can also be used for drawer and table extension slides. 

    Run your own moulding using this bit and if necessary, cut a slot using a dovetail bit with a 14° angle. To run the moulding, setup the centre point of the bit in the centre of the timber and make two passes on either side then machine as neccesary for use in a variety of projects.

    For better safety, these bits should be used only in a router table equipped with a fence and not used free hand. Only available in a 1/2in shank to suit material 12 – 45mm high.

    Check out some great uses for this bit on the Woodworker's Journal website.

    $45.00 (inc GST)
     

Timbecon - Rewards Programearn 1 point for every dollar

Find out more

Subscribe to our Newsletter

You'll be the first to know about our latest offers

Subscribe Here