Free shipping on eligible orders over $149*

Oneida  |  SKU: AXD-152045

Oneida Dust Deputy 4/5in Cyclone Separator Deluxe Kit

$349.00 $679.00
Melbourne: 10+, Perth: 0

Sale ends in:

00 : 00 : 00 : 00
Days
Hours
Mins
Secs

Request Further Information

Oneida Dust Deputy 4/5in Cyclone Separator Deluxe Kit

The Dust Deputy turns your single-stage dust extractor into an efficient, effective two-stage extraction system, minimising suction loss, reducing filter changes and improving workshop air quality.

Its cyclone technology works on a wide range of materials. Oneida’s 4/5 Dust Deputy range is ideal for the serious enthusiast and professional woodworker.

Cyclone Technology

The principle behind cyclone separation is straightforward. The air containing particles enters the cyclone chamber from the side which causes it to spin rapidly around inside the chamber. The dust particles are thrown against the inside wall of the chamber, where they drop out of the airflow and fall into the collection chamber beneath. A low pressure zone develops in the centre of the cyclone through which the clean air is able to exit. Cyclone separation typically removes 99% of particles, leaving the smallest 1% to be captured by filtration.

Universal Compatibility

Any dust extractor that is rated at 350cfm or greater can be used with the Dust Deputy. 

Reduce filter changes

There are no filters inside the Dust Deputy – the dust is removed solely through cyclonic action. Only 1% of the material makes it through the cyclone to be caught in your vacuum’s filter, massively reducing the number of times you need to clean it out.

Reduce Suction Loss

A filter caked with dust will increase resistance to the airflow and can significantly reduce suction. The Dust Deputy removes the dust before it even gets to the vacuum. When your filter is not getting blocked up, the vacuum will continue to run at full air velocity for much longer.

Easy Emptying

The Dust Deputy 4/5 Deluxe kit can be mounted to a wide range of strong collection containers, so emptying the dust is as easy as removing the container’s lid and dumping its contents.

Cyclonic Separation Efficiency

Removes over 99% of fine wood dusts

Horsepower Rating

0.5HP - 3HP

Airflow Requirement

Minimum 350 CFM

Waste Capacity

15 Gallons

Inlet Size

Without Adapters: 5” O.D., 4-3/4” I.D.

With Adapters: 4" O.D., 3-3/4" I.D.

Outlet Size

Without Adapters: 6” O.D., 5-3/4” I.D.

With Adapters: 4" O.D., 3-3/4" I.D.

Discharge Size

8-3/16" O.D.

6" I.D.

 

Primary Build Materials

Static Dissipative Polyethylene, Fiberboard

Static Resistance Rating

Static Dissipative

Colour

Black

Width

16-1/16"

Depth

16-1/2"

Height

43-5/8"

Height to Centre of Inlet

39-3/16"

Product Compatibility

0.5HP to 3HP Single-Stage Dust Collectors (Minimum 350 Actual CFM)

 

Contents

Cyclone, 2x 4" Adapters, Fiber Drum, Lid Clamp, Gasket, Hardware

Country of Origin

Made in USA

Oneida

Oneida Dust Deputy 4/5in Cyclone Separator Deluxe Kit

$349.00 $679.00

The Dust Deputy turns your single-stage dust extractor into an efficient, effective two-stage extraction system, minimising suction loss, reducing filter changes and improving workshop air quality.

Its cyclone technology works on a wide range of materials. Oneida’s 4/5 Dust Deputy range is ideal for the serious enthusiast and professional woodworker.

Cyclone Technology

The principle behind cyclone separation is straightforward. The air containing particles enters the cyclone chamber from the side which causes it to spin rapidly around inside the chamber. The dust particles are thrown against the inside wall of the chamber, where they drop out of the airflow and fall into the collection chamber beneath. A low pressure zone develops in the centre of the cyclone through which the clean air is able to exit. Cyclone separation typically removes 99% of particles, leaving the smallest 1% to be captured by filtration.

Universal Compatibility

Any dust extractor that is rated at 350cfm or greater can be used with the Dust Deputy. 

Reduce filter changes

There are no filters inside the Dust Deputy – the dust is removed solely through cyclonic action. Only 1% of the material makes it through the cyclone to be caught in your vacuum’s filter, massively reducing the number of times you need to clean it out.

Reduce Suction Loss

A filter caked with dust will increase resistance to the airflow and can significantly reduce suction. The Dust Deputy removes the dust before it even gets to the vacuum. When your filter is not getting blocked up, the vacuum will continue to run at full air velocity for much longer.

Easy Emptying

The Dust Deputy 4/5 Deluxe kit can be mounted to a wide range of strong collection containers, so emptying the dust is as easy as removing the container’s lid and dumping its contents.

Cyclonic Separation Efficiency

Removes over 99% of fine wood dusts

Horsepower Rating

0.5HP - 3HP

Airflow Requirement

Minimum 350 CFM

Waste Capacity

15 Gallons

Inlet Size

Without Adapters: 5” O.D., 4-3/4” I.D.

With Adapters: 4" O.D., 3-3/4" I.D.

Outlet Size

Without Adapters: 6” O.D., 5-3/4” I.D.

With Adapters: 4" O.D., 3-3/4" I.D.

Discharge Size

8-3/16" O.D.

6" I.D.

 

Primary Build Materials

Static Dissipative Polyethylene, Fiberboard

Static Resistance Rating

Static Dissipative

Colour

Black

Width

16-1/16"

Depth

16-1/2"

Height

43-5/8"

Height to Centre of Inlet

39-3/16"

Product Compatibility

0.5HP to 3HP Single-Stage Dust Collectors (Minimum 350 Actual CFM)

 

Contents

Cyclone, 2x 4" Adapters, Fiber Drum, Lid Clamp, Gasket, Hardware

Country of Origin

Made in USA

View product