Free shipping on eligible orders over $149*

Oneida  |  SKU: AXD-250004

Oneida Dust Deputy 2.5 Cyclone Separator Deluxe Kit

$359.90
Melbourne: 6, Perth: 1

Sale ends in:

00 : 00 : 00 : 00
Days
Hours
Mins
Secs

Request Further Information

Oneida Dust Deputy 2.5 Cyclone Separator Deluxe Kit

The Dust Deputy turns your tired old wet ‘n’ dry vacuum machine into an efficient, effective two-stage extraction system, minimising suction loss, reducing filter changes and improving workshop air quality.

Its cyclone technology works on a wide range of materials. Whether you are a woodworker, a DIYer, a bone or stone carver, or a teenager whose parents are coming home after a weekend away and you need to tidy up in a hurry, the Dust Deputy will speed up your cleanup.  

The Dust Deputy 2.5 Deluxe Kit includes:

  • Anti-Static Dust Deputy Cyclone Pre-Separator
  • Quick-Release Bucket Lid w/ Cyclonic Design
  • Clear Collapse-Proof 5-Gallon Dust Bucket
  • Caster Mounts with On-Board Accessory Storage
  • Free-Rotating Caster Wheels
  • Vacuum Connection Tether Kit
  • 2.5" x 4.5' Wire-Reinforced Vacuum Connection Hose
  • Pre-cut Neoprene Foam Gasket

Cyclone Technology

The principle behind cyclone separation is straightforward. The air containing particles enters the cyclone chamber from the side which causes it to spin rapidly around inside the chamber. The dust particles are thrown against the inside wall of the chamber, where they drop out of the airflow and fall into the collection chamber beneath. A low pressure zone develops in the centre of the cyclone through which the clean air is able to exit. Cyclone separation typically removes 99% of particles, leaving the smallest 1% to be captured by filtration.

Universal Compatibility

Any wet ‘n’ dry vacuum that is rated at 50cfm or greater can be used with the Dust Deputy.

Reduce filter changes

There are no filters inside the Dust Deputy – the dust is removed solely through cyclonic action. Only 1% of the material makes it through the cyclone to be caught in your vacuum’s filter, massively reducing the number of times you need to clean it out.

Reduce Suction Loss

A filter caked with dust will increase resistance to the airflow and can significantly reduce suction. The Dust Deputy removes the dust before it even gets to the vacuum. When your filter is not getting blocked up, the vacuum will continue to run at full air velocity for much longer.

Cyclonic Separation Efficiency

Removes over 99% of fine wood dusts

Waste Capacity

5 Gallons

Inlet Size

Nominal: 2.25" I.D. / 2.5" O.D.

Actual: Tapered 2.31" to 2.29" I.D.

 

Outlet Size

Nominal: 2.25" I.D.

Actual: Tapered 2.31" to 2.29" I.D.

 

Discharge Size

3" I.D.

Primary Build Materials

Polypropylene, Polyethylene

Static Resistance Rating

Anti-Static

Colour

Clear

Width

17-3/4"

Depth

13-1/2"

Height

32-1/8"

Height to Centre of Inlet

30-1/4"

Product Compatibility

Wet/Dry Vacuums with 2.5" hoses and inlets

Contents

Cyclone, Collapse-Proof Bucket, Lid, 4x Casters, 4x Caster Mounts, 2.5" x 4.5' Hose w/ Cuffs, Vacuum Tether Kit, Gasket, Hardware

Country of Origin

Made in USA

Oneida

Oneida Dust Deputy 2.5 Cyclone Separator Deluxe Kit

$359.90

The Dust Deputy turns your tired old wet ‘n’ dry vacuum machine into an efficient, effective two-stage extraction system, minimising suction loss, reducing filter changes and improving workshop air quality.

Its cyclone technology works on a wide range of materials. Whether you are a woodworker, a DIYer, a bone or stone carver, or a teenager whose parents are coming home after a weekend away and you need to tidy up in a hurry, the Dust Deputy will speed up your cleanup.  

The Dust Deputy 2.5 Deluxe Kit includes:

  • Anti-Static Dust Deputy Cyclone Pre-Separator
  • Quick-Release Bucket Lid w/ Cyclonic Design
  • Clear Collapse-Proof 5-Gallon Dust Bucket
  • Caster Mounts with On-Board Accessory Storage
  • Free-Rotating Caster Wheels
  • Vacuum Connection Tether Kit
  • 2.5" x 4.5' Wire-Reinforced Vacuum Connection Hose
  • Pre-cut Neoprene Foam Gasket

Cyclone Technology

The principle behind cyclone separation is straightforward. The air containing particles enters the cyclone chamber from the side which causes it to spin rapidly around inside the chamber. The dust particles are thrown against the inside wall of the chamber, where they drop out of the airflow and fall into the collection chamber beneath. A low pressure zone develops in the centre of the cyclone through which the clean air is able to exit. Cyclone separation typically removes 99% of particles, leaving the smallest 1% to be captured by filtration.

Universal Compatibility

Any wet ‘n’ dry vacuum that is rated at 50cfm or greater can be used with the Dust Deputy.

Reduce filter changes

There are no filters inside the Dust Deputy – the dust is removed solely through cyclonic action. Only 1% of the material makes it through the cyclone to be caught in your vacuum’s filter, massively reducing the number of times you need to clean it out.

Reduce Suction Loss

A filter caked with dust will increase resistance to the airflow and can significantly reduce suction. The Dust Deputy removes the dust before it even gets to the vacuum. When your filter is not getting blocked up, the vacuum will continue to run at full air velocity for much longer.

Cyclonic Separation Efficiency

Removes over 99% of fine wood dusts

Waste Capacity

5 Gallons

Inlet Size

Nominal: 2.25" I.D. / 2.5" O.D.

Actual: Tapered 2.31" to 2.29" I.D.

 

Outlet Size

Nominal: 2.25" I.D.

Actual: Tapered 2.31" to 2.29" I.D.

 

Discharge Size

3" I.D.

Primary Build Materials

Polypropylene, Polyethylene

Static Resistance Rating

Anti-Static

Colour

Clear

Width

17-3/4"

Depth

13-1/2"

Height

32-1/8"

Height to Centre of Inlet

30-1/4"

Product Compatibility

Wet/Dry Vacuums with 2.5" hoses and inlets

Contents

Cyclone, Collapse-Proof Bucket, Lid, 4x Casters, 4x Caster Mounts, 2.5" x 4.5' Hose w/ Cuffs, Vacuum Tether Kit, Gasket, Hardware

Country of Origin

Made in USA

View product