105 Engraving Cutter

  • 105 Engraving Cutter 105-AD

    Turn your Dremel rotary tool into a powerful high-speed cutter. Create stylish designs on wood, fiberglass, ceramics, jewelry, soft metals and more. Our powerful, simple-to-use engraving cutters make it easy to express your creativity.

    • 1/8-inch shank
    • Ideal for fine detailed work
    • Engraving bits can also be used for carving and routing


    • Ideal engraving, carving and routing
    • Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals
    • Recommended for detail work
    • 1/8 In. shank
    • 105 Engraving Cutter (2)

    User Tips

    • Secure objects to a stable surface while working.
    • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
    • Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
    • Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
    • If chattering occurs, increase speed.


    • Bit Diameter inch: 1/32"
    • Bit Diameter mm: 0.8 mm
    $15.00 (inc GST)

Timbecon - Rewards Programearn 1 point for every dollar

Find out more

Subscribe to our Newsletter

You'll be the first to know about our latest offers

Subscribe Here