#5 1/4 Bench Plane

  • #5 1/4 Bench Plane 05-P-2401

    Also called a junior jack, the traditional #5-1/4 was 305mm long, in between a #4 smooth plane at 254mm and a #5 jack at 355mm. The Veritas #5-1/4W differs from the original in many ways – mainly, this has a wider blade and the mouth is 110mm behind the nose, unlike the original at 88mm. For better accuracy, an extra-long sole in front of the blade makes it easier to keep the sole flush to the wood when starting a cut. Combined, the mouth location and sensitive feed adjustment let the #5-1/4W serve as a jointer for most cabinet work. 

    Like all Veritas bench planes, the #5-1/4W bench plane incorporates a frog that extends all the way to the sole. This unique design provides complete blade support, reducing chatter and allows quick mouth adjustment. It can be closed to a narrow slit for fine shavings and minimum tear-out, or opened for heavier cuts, all without removing the lever cap or other parts; just loosen two screws and set the opening with the thumb wheel. 

    The body is fully stress-relieved ductile cast iron. The surface-ground 305 x 63.5mm sole is flat and square to the sides, with extra-large side wings for stable shooting. The bubinga front knob and rear tote provide excellent control and comfort. A combined feed and lateral adjustment mechanism make blade setting easy and accurate. The 50.8mm wide lapped blade is a full 3.2mm thick, made in A2 tool steel.

    $409.00 (inc GST)

Timbecon - Rewards Programearn 1 point for every dollar

Find out more

Subscribe to our Newsletter

You'll be the first to know about our latest offers

Subscribe Here