Original Incra Jig

  • Original Incra Jig

    The renowned Original Incra Jig has brand new features!

    The Original Incra Jig has been reissued, and the same qualities that made it such a knockout are still relevant in workshops today.

    The only two moving parts are the locking knob and the single-piece upper carriage. It indexes on 1.0mm increments with the same 0.025mm positioning accuracy and repeatability of our top-of-the-line LS Positioners – just without the fine adjustment.

    Incra Jig, fence positioner, dovetail jig, box joints, bandsaw table, drill press table and more!

    The rigid, glass-reinforced resin body provides 200mm of solid fence travel. The patented incremental racks are installed where the halves of the jig meet and when the clamping knob is tightened, the teeth mesh, causing the fence and carriage to instantly “centre up” on the perfect multiples of 1.0mm increments far more precisely than working by eye alone.

    Create dovetails with the Incra Jig Fence System

    By adding the Incra Jig Fence System, 3/8in box joint and 1/2in dovetails can be produced equally spaced or variably spaced. The dovetail template can be made half-blind, through, sliding, or corner-post.

    For even more variety, the 11 box joint templates and 29 dovetail templates from the Incra Master Reference Guide can be adapted to the Original INCRA Jig to produce literally billions of joinery variations. If you need the ultimate in accuracy on other platforms, such as a drill press table or band saw (as shown in the image gallery), then the Original Incra Jig is impossible to beat.

    Not just for Box Joints and Dovetails!

    And keep in mind that INCRA Jigs aren’t just for box joints and dovetails. The incremental nature of the Jig causes fence setups for any repetitive cutting operations such as grooving and fluting to suddenly become lightning fast and dead-on accurate. Adding a fence with a larger router bit opening makes it simple to remove material in controlled steps when doing everyday edge forming operations.

    Though it was made famous by router work, the Original INCRA Jig’s compact size makes it perfect for use at a variety of different machines, really anywhere you have a need for a sturdy, accurate, and repeatable fence positioner. Positioning the fence on a drill press table or re-sawing lumber at the band saw are only two of the possibilities.

    Though the value of the reissued Original INCRA Jig hasn’t changed, the rest of the package has benefitted from our 20+ years of experience manufacturing incremental positioners. The printed instructions are clear, concise, and fully illustrated.

    Original Incra Jig Only
    IJ-32-M
    $109.00 (inc GST)
    Fence, Stop & Right Angle Fixture
    IJ-32-FNC
    $109.00 (inc GST)
    Incra Jig & Fence System
    IJ-32-MSET
    $199.00 (inc GST)
     
  • delivery icon Standard delivery within Australia is 3 to 5 days.
  • pickup icon FREE pickup from our Perth or Melbourne stores

Product Video